All, The following patch should fix 7 MHz DVB-T with the XC3028 using the DTV7 firmware from the xc3028-v27.fw firmware image.
Comments? Regards, Andy Walls Signed-off-by: Andy Walls <[email protected]> Tested-by: Terry Wu <[email protected]> diff -r fad35ab59848 linux/drivers/media/common/tuners/tuner-xc2028.c --- a/linux/drivers/media/common/tuners/tuner-xc2028.c Fri Jun 05 08:42:27 2009 -0400 +++ b/linux/drivers/media/common/tuners/tuner-xc2028.c Thu Jun 11 06:52:55 2009 -0400 @@ -1099,8 +1099,19 @@ } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <[email protected]> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
