On Thursday 11 June 2009 19:00:46 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri <a0868...@gt516km11.gt.design.ti.com>
>
> DM355 platform and board setup
>
> This has platform and board setup changes to support vpfe capture
> driver for DM355 EVMs.
>
> Added registration of vpss platform driver based on last review
>
> Reviewed By "Hans Verkuil".
> Reviewed By "Laurent Pinchart".
>
> Signed-off-by: Muralidharan Karicheri <m-kariche...@ti.com>
> ---
> Applies to Davinci GIT Tree
>
> arch/arm/mach-davinci/board-dm355-evm.c | 72 +++++++++++++++++++++++-
> arch/arm/mach-davinci/dm355.c | 83
> ++++++++++++++++++++++++++++
> arch/arm/mach-davinci/include/mach/dm355.h | 2 +
> arch/arm/mach-davinci/include/mach/mux.h | 9 +++
> 4 files changed, 163 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c
> b/arch/arm/mach-davinci/board-dm355-evm.c
> index 5ac2f56..cf87e21 100644
> --- a/arch/arm/mach-davinci/board-dm355-evm.c
> +++ b/arch/arm/mach-davinci/board-dm355-evm.c
> @@ -20,6 +20,8 @@
> #include <linux/io.h>
> #include <linux/gpio.h>
> #include <linux/clk.h>
> +#include <linux/videodev2.h>
> +#include <media/tvp514x.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/eeprom.h>
>
> @@ -134,12 +136,23 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
> dm355evm_mmc_gpios = gpio;
> }
>
> +#define TVP5146_I2C_ADDR 0x5D
> +static struct tvp514x_platform_data tvp5146_pdata = {
> + .clk_polarity = 0,
> + .hs_polarity = 1,
> + .vs_polarity = 1
> +};
> +
> static struct i2c_board_info dm355evm_i2c_info[] = {
> - { I2C_BOARD_INFO("dm355evm_msp", 0x25),
> + { I2C_BOARD_INFO("dm355evm_msp", 0x25),
> .platform_data = dm355evm_mmcsd_gpios,
> - /* plus irq */ },
> + },
> + {
> + I2C_BOARD_INFO("tvp5146", TVP5146_I2C_ADDR),
> + .platform_data = &tvp5146_pdata,
> + },
> + /* { plus irq }, */
> /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
Huh? What's this? I only know the tlv320aic23b and that's an audio driver.
> - /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
> };
>
> static void __init evm_init_i2c(void)
> @@ -178,6 +191,57 @@ static struct platform_device dm355evm_dm9000 = {
> .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
> };
>
> +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
> +/* Inputs available at the TVP5146 */
> +static struct v4l2_input tvp5146_inputs[] = {
> + {
> + .index = 0,
> + .name = "COMPOSITE",
Please, don't use all-caps. Just use "Composite" and "S-Video".
> + .type = V4L2_INPUT_TYPE_CAMERA,
> + .std = TVP514X_STD_ALL,
> + },
> + {
> + .index = 1,
> + .name = "SVIDEO",
> + .type = V4L2_INPUT_TYPE_CAMERA,
> + .std = TVP514X_STD_ALL,
> + },
> +};
> +
> +/*
> + * this is the route info for connecting each input to decoder
> + * ouput that goes to vpfe. There is a one to one correspondence
> + * with tvp5146_inputs
> + */
> +static struct v4l2_routing tvp5146_routes[] = {
As mentioned elsewhere: v4l2_routing will disappear, so please don't use it.
> + {
> + .input = INPUT_CVBS_VI2B,
> + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
> + },
> + {
> + .input = INPUT_SVIDEO_VI2C_VI1C,
> + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
> + },
> +};
> +
> +static struct vpfe_subdev_info vpfe_sub_devs[] = {
> + {
> + .name = "tvp5146",
> + .grp_id = 0,
> + .num_inputs = ARRAY_SIZE(tvp5146_inputs),
> + .inputs = tvp5146_inputs,
> + .routes = tvp5146_routes,
> + .can_route = 1,
> + }
> +};
A general remark: currently you link your inputs directly to a subdev. This
approach has two disadvantages:
1) It doesn't work if there are no subdevs at all (e.g. because everything
goes through an fpga).
2) It fixes the reported order of the inputs to the order of the subdevs.
I think it is better to have a separate array of input descriptions that
refer to a subdev when an input is associated with that subdev. It's more
flexible that way, and I actually think that the vpfe driver will be
simplified as well.
> +
> +static struct vpfe_config vpfe_cfg = {
> + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
> + .sub_devs = vpfe_sub_devs,
> + .card_name = "DM355 EVM",
> + .ccdc = "DM355 CCDC",
> +};
> +
> static struct platform_device *davinci_evm_devices[] __initdata = {
> &dm355evm_dm9000,
> &davinci_nand_device,
> @@ -189,6 +253,8 @@ static struct davinci_uart_config uart_config __initdata
> = {
>
> static void __init dm355_evm_map_io(void)
> {
> + /* setup input configuration for VPFE input devices */
> + dm355_set_vpfe_config(&vpfe_cfg);
> dm355_init();
> }
>
> diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
> index 9baeed3..3263af8 100644
> --- a/arch/arm/mach-davinci/dm355.c
> +++ b/arch/arm/mach-davinci/dm355.c
> @@ -481,6 +481,14 @@ INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1,
> false)
> EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
> EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
> EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
> +
> +MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false)
> +MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false)
> +MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false)
> +MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false)
> +MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false)
> +MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false)
> +MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false)
> #endif
> };
>
> @@ -623,6 +631,67 @@ static struct platform_device dm355_edma_device = {
> .resource = edma_resources,
> };
>
> +static struct resource dm355_vpss_resources[] = {
> + {
> + /* VPSS BL Base address */
> + .name = "vpss",
> + .start = 0x01c70800,
> + .end = 0x01c70800 + 0xff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + /* VPSS CLK Base address */
> + .name = "vpss",
> + .start = 0x01c70000,
> + .end = 0x01c70000 + 0xf,
> + .flags = IORESOURCE_MEM,
> + },
> +};
> +
> +static struct platform_device dm355_vpss_device = {
> + .name = "vpss",
> + .id = -1,
> + .dev.platform_data = "dm355_vpss",
> + .num_resources = ARRAY_SIZE(dm355_vpss_resources),
> + .resource = dm355_vpss_resources,
> +};
> +
> +static struct resource vpfe_resources[] = {
> + {
> + .start = IRQ_VDINT0,
> + .end = IRQ_VDINT0,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .start = IRQ_VDINT1,
> + .end = IRQ_VDINT1,
> + .flags = IORESOURCE_IRQ,
> + },
> + /* CCDC Base address */
> + {
> + .flags = IORESOURCE_MEM,
> + .start = 0x01c70600,
> + .end = 0x01c70600 + 0x1ff,
> + },
> +};
> +
> +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct platform_device vpfe_capture_dev = {
> + .name = CAPTURE_DRV_NAME,
> + .id = -1,
> + .num_resources = ARRAY_SIZE(vpfe_resources),
> + .resource = vpfe_resources,
> + .dev = {
> + .dma_mask = &vpfe_capture_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> +void dm355_set_vpfe_config(struct vpfe_config *cfg)
> +{
> + vpfe_capture_dev.dev.platform_data = cfg;
> +}
> +
> /*----------------------------------------------------------------------*/
>
> static struct map_desc dm355_io_desc[] = {
> @@ -744,6 +813,20 @@ static int __init dm355_init_devices(void)
>
> davinci_cfg_reg(DM355_INT_EDMA_CC);
> platform_device_register(&dm355_edma_device);
> + platform_device_register(&dm355_vpss_device);
> + /*
> + * setup Mux configuration for vpfe input and register
> + * vpfe capture platform device
> + */
> + davinci_cfg_reg(DM355_VIN_PCLK);
> + davinci_cfg_reg(DM355_VIN_CAM_WEN);
> + davinci_cfg_reg(DM355_VIN_CAM_VD);
> + davinci_cfg_reg(DM355_VIN_CAM_HD);
> + davinci_cfg_reg(DM355_VIN_YIN_EN);
> + davinci_cfg_reg(DM355_VIN_CINL_EN);
> + davinci_cfg_reg(DM355_VIN_CINH_EN);
> + platform_device_register(&vpfe_capture_dev);
> +
> return 0;
> }
> postcore_initcall(dm355_init_devices);
> diff --git a/arch/arm/mach-davinci/include/mach/dm355.h
> b/arch/arm/mach-davinci/include/mach/dm355.h
> index 54903b7..e28713c 100644
> --- a/arch/arm/mach-davinci/include/mach/dm355.h
> +++ b/arch/arm/mach-davinci/include/mach/dm355.h
> @@ -12,11 +12,13 @@
> #define __ASM_ARCH_DM355_H
>
> #include <mach/hardware.h>
> +#include <media/davinci/vpfe_capture.h>
>
> struct spi_board_info;
>
> void __init dm355_init(void);
> void dm355_init_spi0(unsigned chipselect_mask,
> struct spi_board_info *info, unsigned len);
> +void dm355_set_vpfe_config(struct vpfe_config *cfg);
>
> #endif /* __ASM_ARCH_DM355_H */
> diff --git a/arch/arm/mach-davinci/include/mach/mux.h
> b/arch/arm/mach-davinci/include/mach/mux.h
> index 2737845..f288063 100644
> --- a/arch/arm/mach-davinci/include/mach/mux.h
> +++ b/arch/arm/mach-davinci/include/mach/mux.h
> @@ -154,6 +154,15 @@ enum davinci_dm355_index {
> DM355_EVT8_ASP1_TX,
> DM355_EVT9_ASP1_RX,
> DM355_EVT26_MMC0_RX,
> +
> + /* Video In Pin Mux */
> + DM355_VIN_PCLK,
> + DM355_VIN_CAM_WEN,
> + DM355_VIN_CAM_VD,
> + DM355_VIN_CAM_HD,
> + DM355_VIN_YIN_EN,
> + DM355_VIN_CINL_EN,
> + DM355_VIN_CINH_EN,
> };
>
> #ifdef CONFIG_DAVINCI_MUX
Regards,
Hans
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
