>> +
>> +struct v4l2_subdev_bus {
>> + enum v4l2_subdev_bus_type type;
>> + u8 width;
>> + /* 0 - active low, 1 - active high */
>> + unsigned pol_vsync:1;
>> + /* 0 - active low, 1 - active high */
>> + unsigned pol_hsync:1;
>> + /* 0 - low to high , 1 - high to low */
>> + unsigned pol_field:1;
>> + /* 0 - sample at falling edge , 1 - sample at rising edge */
>> + unsigned pol_pclock:1;
>> + /* 0 - active low , 1 - active high */
>> + unsigned pol_data:1;
>> +};
>
>As for the pins/signals, I wonder if per-signal polarity/edge is
>enough. If this is going to be used by/replace the soc_camera
>interface then we also need to know if the signal is present or not.
>For instance, I have a SuperH board using my CEU driver together with
>one OV7725 camera or one TW9910 video decoder. Some revisions of the
>board do not route the field signal between the SuperH on-chip CEU and
>the TW9910. Both the CEU and the TW9910 support this signal, it just
>happen to be missing.
[MK]In that case can't the driver just ignore the field polarity? I assume that
drivers implement the parameter that has support in hardware. So it is not an
issue.
I think we need a way to include this board
>specific property somehow.
>
>/ magnus
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
