On Saturday 27 June 2009 00:05:48 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri <m-kariche...@ti.com>
>
> Following are the changes:-
> 1) moved i2c board specific part to sub device configuration
> structure so that sub device can be loaded from vpfe capture
> using the new v4l2_i2c_new_subdev_board() api
> 2) adding mt9t031 sub device configuration information for
> DM355 as part of camera capture support to vpfe capture
> 3) adding support to setup raw data path and i2c switch
> when capturing from mt9t031
>
> NOTE: Depends on v3 version of vpfe capture driver patch
>
> Mandatory Reviewers: Kevin Hilman <khil...@deeprootsystems.com>
> Mandatory Reviewers: Hans Verkuil <hverk...@xs4all.nl>
>
> Signed-off-by: Muralidharan Karicheri <m-kariche...@ti.com>
> ---
> Applies to DaVinci GIT Tree
>
> arch/arm/mach-davinci/board-dm355-evm.c | 208
> ++++++++++++++++++++++++++++--
> arch/arm/mach-davinci/board-dm644x-evm.c | 24 ++--
> 2 files changed, 210 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c
> b/arch/arm/mach-davinci/board-dm355-evm.c
> index 513be53..a781ca2 100644
> --- a/arch/arm/mach-davinci/board-dm355-evm.c
> +++ b/arch/arm/mach-davinci/board-dm355-evm.c
> @@ -136,10 +136,66 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
> dm355evm_mmc_gpios = gpio;
> }
>
> -static struct tvp514x_platform_data tvp5146_pdata = {
> - .clk_polarity = 0,
> - .hs_polarity = 1,
> - .vs_polarity = 1
> +/*
> + * MSP430 supports RTC, card detection, input from IR remote, and
> + * a bit more. It triggers interrupts on GPIO(7) from pressing
> + * buttons on the IR remote, and for card detect switches.
> + */
> +static struct i2c_client *dm355evm_msp;
> +
> +static int dm355evm_msp_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + dm355evm_msp = client;
> + return 0;
> +}
> +
> +static int dm355evm_msp_remove(struct i2c_client *client)
> +{
> + dm355evm_msp = NULL;
> + return 0;
> +}
> +
> +static const struct i2c_device_id dm355evm_msp_ids[] = {
> + { "dm355evm_msp", 0, },
> + { /* end of list */ },
> +};
> +
> +static struct i2c_driver dm355evm_msp_driver = {
> + .driver.name = "dm355evm_msp",
> + .id_table = dm355evm_msp_ids,
> + .probe = dm355evm_msp_probe,
> + .remove = dm355evm_msp_remove,
> +};
> +
> +#define PCA9543A_I2C_ADDR (0x73)
> +
> +static struct i2c_client *pca9543a;
> +
> +static int pca9543a_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + pca9543a = client;
> + return 0;
> +}
> +
> +static int pca9543a_remove(struct i2c_client *client)
> +{
> + pca9543a = NULL;
> + return 0;
> +}
> +
> +static const struct i2c_device_id pca9543a_ids[] = {
> + { "PCA9543A", 0, },
> + { /* end of list */ },
> +};
> +
> +/* This is for i2c driver for the MT9T031 header i2c switch */
> +static struct i2c_driver pca9543a_driver = {
> + .driver.name = "PCA9543A",
> + .id_table = pca9543a_ids,
> + .probe = pca9543a_probe,
> + .remove = pca9543a_remove,
> };
>
> static struct i2c_board_info dm355evm_i2c_info[] = {
> @@ -147,13 +203,22 @@ static struct i2c_board_info dm355evm_i2c_info[] = {
> .platform_data = dm355evm_mmcsd_gpios,
> },
> {
> - I2C_BOARD_INFO("tvp5146", 0x5d),
> - .platform_data = &tvp5146_pdata,
> + I2C_BOARD_INFO("PCA9543A", 0x73),
> },
> /* { plus irq }, */
> /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
> };
>
> +/* have_sensor() - Check if we have support for sensor interface */
> +static inline int have_sensor(void)
> +{
> +#ifdef CONFIG_SOC_CAMERA_MT9T031
> + return 1;
> +#else
> + return 0;
> +#endif
> +}
> +
> static void __init evm_init_i2c(void)
> {
> davinci_init_i2c(&i2c_pdata);
> @@ -161,9 +226,12 @@ static void __init evm_init_i2c(void)
> gpio_request(5, "dm355evm_msp");
> gpio_direction_input(5);
> dm355evm_i2c_info[0].irq = gpio_to_irq(5);
> -
> + i2c_add_driver(&dm355evm_msp_driver);
> + if (have_sensor())
> + i2c_add_driver(&pca9543a_driver);
> i2c_register_board_info(1, dm355evm_i2c_info,
> ARRAY_SIZE(dm355evm_i2c_info));
> +
> }
>
> static struct resource dm355evm_dm9000_rsrc[] = {
> @@ -190,6 +258,104 @@ static struct platform_device dm355evm_dm9000 = {
> .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
> };
>
> +/**
> + * dm355evm_enable_raw_data_path() - Enable/Disable raw data path
> + * @en: enable/disbale flag
> + */
> +static int dm355evm_enable_raw_data_path(int en)
> +{
> + static char txbuf[2] = { 8, 0x80 };
> + int status;
> + struct i2c_msg msg = {
> + .flags = 0,
> + .len = 2,
> + .buf = (void __force *)txbuf,
> + };
> +
> + if (!en)
> + txbuf[1] = 0;
> +
> + if (!dm355evm_msp)
> + return -ENXIO;
> +
> + msg.addr = dm355evm_msp->addr,
> + /* turn on/off the raw data path through msp430 */
> + status = i2c_transfer(dm355evm_msp->adapter, &msg, 1);
> + return status;
> +}
> +
> +
> +/**
> + * dm355_enable_i2c_switch() - Enable/Disable I2C switch PCA9543A for sensor
> + * @en: enable/disbale flag
> + */
> +static int dm355evm_enable_i2c_switch(int en)
> +{
> + static char val = 1;
> + int status;
> + struct i2c_msg msg = {
> + .flags = 0,
> + .len = 1,
> + .buf = &val,
> + };
> +
> + if (!en)
> + val = 0;
> +
> + if (!pca9543a)
> + return -ENXIO;
> +
> + msg.addr = pca9543a->addr;
> + /* turn i2 switch, pca9543a, on/off */
Typo: i2 -> i2c
> + status = i2c_transfer(pca9543a->adapter, &msg, 1);
> + return status;
> +}
> +
> +/**
> + * dm355evm_setup_video_input() - setup video data path and i2c
> + * @id: sub device id
> + */
> +static int dm355evm_setup_video_input(enum vpfe_subdev_id id)
> +{
> + int ret;
> +
> + switch (id) {
> + case VPFE_SUBDEV_MT9T031:
> + {
> + ret = dm355evm_enable_raw_data_path(1);
> + if (ret >= 0)
> + ret = dm355evm_enable_i2c_switch(1);
> + else
> + /* switch off i2c switch since we failed */
> + ret = dm355evm_enable_i2c_switch(0);
> + break;
> + }
> + case VPFE_SUBDEV_TVP5146:
> + {
> + ret = dm355evm_enable_raw_data_path(0);
> + break;
> + }
> + default:
> + return -1;
> + }
> + return (ret >= 0 ? 0 : -1);
Why not return proper return codes?
> +}
> +
> +/* Inputs available at the TVP5146 */
Comment out of date: this array refers to the mt9t031.
> +static struct v4l2_input mt9t031_inputs[] = {
> + {
> + .index = 0,
> + .name = "Camera",
> + .type = V4L2_INPUT_TYPE_CAMERA,
> + }
> +};
> +
> +static struct tvp514x_platform_data tvp5146_pdata = {
> + .clk_polarity = 0,
> + .hs_polarity = 1,
> + .vs_polarity = 1
> +};
> +
> #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
> /* Inputs available at the TVP5146 */
> static struct v4l2_input tvp5146_inputs[] = {
> @@ -207,7 +373,7 @@ static struct v4l2_input tvp5146_inputs[] = {
> },
> };
>
> -/*
> +/**
> * this is the route info for connecting each input to decoder
> * ouput that goes to vpfe. There is a one to one correspondence
> * with tvp5146_inputs
> @@ -225,8 +391,8 @@ static struct vpfe_route tvp5146_routes[] = {
>
> static struct vpfe_subdev_info vpfe_sub_devs[] = {
> {
> - .name = "tvp5146",
> - .grp_id = 0,
> + .name = TVP514X_MODULE_NAME,
> + .grp_id = VPFE_SUBDEV_TVP5146,
> .num_inputs = ARRAY_SIZE(tvp5146_inputs),
> .inputs = tvp5146_inputs,
> .routes = tvp5146_routes,
> @@ -236,6 +402,27 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
> .hdpol = VPFE_PINPOL_POSITIVE,
> .vdpol = VPFE_PINPOL_POSITIVE,
> },
> + .board_info = {
> + I2C_BOARD_INFO("tvp5146", 0x5d),
> + .platform_data = &tvp5146_pdata,
> + },
> + },
> + {
> + .name = "mt9t031",
> + .camera = 1,
> + .grp_id = VPFE_SUBDEV_MT9T031,
> + .num_inputs = ARRAY_SIZE(mt9t031_inputs),
> + .inputs = mt9t031_inputs,
> + .ccdc_if_params = {
> + .if_type = VPFE_RAW_BAYER,
> + .hdpol = VPFE_PINPOL_POSITIVE,
> + .vdpol = VPFE_PINPOL_POSITIVE,
> + },
> + .board_info = {
> + I2C_BOARD_INFO("mt9t031", 0x5d),
> + /* this is for PCLK rising edge */
> + .platform_data = (void *)1,
> + },
> }
> };
>
> @@ -244,6 +431,7 @@ static struct vpfe_config vpfe_cfg = {
> .sub_devs = vpfe_sub_devs,
> .card_name = "DM355 EVM",
> .ccdc = "DM355 CCDC",
> + .setup_input = dm355evm_setup_video_input,
> };
>
> static struct platform_device *davinci_evm_devices[] __initdata = {
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c
> b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 54f084b..310cd75 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -196,6 +196,12 @@ static struct platform_device davinci_fb_device = {
> .num_resources = 0,
> };
>
> +static struct tvp514x_platform_data tvp5146_pdata = {
> + .clk_polarity = 0,
> + .hs_polarity = 1,
> + .vs_polarity = 1
> +};
> +
> #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
> /* Inputs available at the TVP5146 */
> static struct v4l2_input tvp5146_inputs[] = {
> @@ -231,8 +237,8 @@ static struct vpfe_route tvp5146_routes[] = {
>
> static struct vpfe_subdev_info vpfe_sub_devs[] = {
> {
> - .name = "tvp5146",
> - .grp_id = 0,
> + .name = TVP514X_MODULE_NAME,
> + .grp_id = VPFE_SUBDEV_TVP5146,
> .num_inputs = ARRAY_SIZE(tvp5146_inputs),
> .inputs = tvp5146_inputs,
> .routes = tvp5146_routes,
> @@ -242,6 +248,10 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
> .hdpol = VPFE_PINPOL_POSITIVE,
> .vdpol = VPFE_PINPOL_POSITIVE,
> },
> + .board_info = {
> + I2C_BOARD_INFO("tvp5146", 0x5d),
> + .platform_data = &tvp5146_pdata,
> + },
> },
> };
>
> @@ -504,12 +514,6 @@ static struct at24_platform_data eeprom_info = {
> .context = (void *)0x7f00,
> };
>
> -static struct tvp514x_platform_data tvp5146_pdata = {
> - .clk_polarity = 0,
> - .hs_polarity = 1,
> - .vs_polarity = 1
> -};
> -
> /*
> * MSP430 supports RTC, card detection, input from IR remote, and
> * a bit more. It triggers interrupts on GPIO(7) from pressing
> @@ -621,10 +625,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
> I2C_BOARD_INFO("24c256", 0x50),
> .platform_data = &eeprom_info,
> },
> - {
> - I2C_BOARD_INFO("tvp5146", 0x5d),
> - .platform_data = &tvp5146_pdata,
> - },
> /* ALSO:
> * - tvl320aic33 audio codec (0x1b)
> */
Regards,
Hans
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
