Heips Nils,
On 07/07/2009 05:33 PM, Nils Kassube wrote:
Hi Antti,
Antti Palosaari wrote:
Nils Kassube wrote:
As I'm not familiar with the hardware, I can't say what buffer size
would be appropriate but I can say that for my device the parameter
I see the problem but your fix is not ideally correct for my eyes.
You're probably right - like I wrote, I'm not familiar with the
hardware.
I
don't have currently access to sniffs to ensure that but I think BOOT
should be write command. Now it is defined as read. I think moving
BOOT from read to write fixes problem.
Yes, that makes a lot of sense to me. Therefore I changed the code to
make it a write command like this:
--- orig/linux-2.6.31/drivers/media/dvb/dvb-usb/af9015.c 2009-06-30
11:34:45.000000000 +0200
+++ linux-2.6.31/drivers/media/dvb/dvb-usb/af9015.c 2009-07-07
14:58:27.000000000 +0200
@@ -81,7 +81,6 @@
switch (req->cmd) {
case GET_CONFIG:
- case BOOT:
case READ_MEMORY:
case RECONNECT_USB:
case GET_IR_CODE:
@@ -100,6 +99,7 @@
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
+ case BOOT:
break;
default:
err("unknown command:%d", req->cmd);
And of course I removed the earlier change. With this modification it
works as well.
I need your signed off by tag in order to forward this mainline. Patch
is correct and I tested it also.
About tags http://kerneltrap.org/node/8329
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
