Hello all
On 7/13/09, Joonyoung Shim <[email protected]> wrote:
> This patch supports i2c interface of si470x. The i2c specific part
> exists in radio-si470x-i2c.c file and the common part uses
> radio-si470x-common.c file. The '#if defined' is inserted inevitably
> because of parts used only si470x usb in the common file.
>
> The current driver version doesn't support the RDS.
>
> Signed-off-by: Joonyoung Shim <[email protected]>
> ---
> linux/drivers/media/radio/si470x/Kconfig | 13 +
> linux/drivers/media/radio/si470x/Makefile | 2 +
> .../media/radio/si470x/radio-si470x-common.c | 24 ++
> .../drivers/media/radio/si470x/radio-si470x-i2c.c | 250
> ++++++++++++++++++++
> linux/drivers/media/radio/si470x/radio-si470x.h | 6 +
> 5 files changed, 295 insertions(+), 0 deletions(-)
> create mode 100644 linux/drivers/media/radio/si470x/radio-si470x-i2c.c
>
> diff --git a/linux/drivers/media/radio/si470x/Kconfig
> b/linux/drivers/media/radio/si470x/Kconfig
> index 20d05c0..a466654 100644
> --- a/linux/drivers/media/radio/si470x/Kconfig
> +++ b/linux/drivers/media/radio/si470x/Kconfig
> @@ -22,3 +22,16 @@ config USB_SI470X
>
> To compile this driver as a module, choose M here: the
> module will be called radio-usb-si470x.
> +
> +config I2C_SI470X
> + tristate "Silicon Labs Si470x FM Radio Receiver support with I2C"
> + depends on I2C && RADIO_SI470X && !USB_SI470X
> + ---help---
> + This is a driver for I2C devices with the Silicon Labs SI470x
> + chip.
> +
> + Say Y here if you want to connect this type of radio to your
> + computer's I2C port.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called radio-i2c-si470x.
> diff --git a/linux/drivers/media/radio/si470x/Makefile
> b/linux/drivers/media/radio/si470x/Makefile
> index 3cb777f..0696481 100644
> --- a/linux/drivers/media/radio/si470x/Makefile
> +++ b/linux/drivers/media/radio/si470x/Makefile
> @@ -3,5 +3,7 @@
> #
>
> radio-usb-si470x-objs := radio-si470x-usb.o radio-si470x-common.o
> +radio-i2c-si470x-objs := radio-si470x-i2c.o radio-si470x-common.o
>
> obj-$(CONFIG_USB_SI470X) += radio-usb-si470x.o
> +obj-$(CONFIG_I2C_SI470X) += radio-i2c-si470x.o
> diff --git a/linux/drivers/media/radio/si470x/radio-si470x-common.c
> b/linux/drivers/media/radio/si470x/radio-si470x-common.c
> index d2dc1ff..77f79e7 100644
> --- a/linux/drivers/media/radio/si470x/radio-si470x-common.c
> +++ b/linux/drivers/media/radio/si470x/radio-si470x-common.c
> @@ -473,11 +473,13 @@ static int si470x_vidioc_g_ctrl(struct file *file,
> void *priv,
> struct si470x_device *radio = video_drvdata(file);
> int retval = 0;
>
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> /* safety checks */
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
I'm sorry for asking but is it possible to turn this into separate macro?
Something like this for example:
/* comment about macro */
#if defined (CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
#define safety_check() if() {
... checks ...
}
#elseif
#define safety_check()
#endif
to run away from many #if defined-#endif constructions in source code.
Is it really good to redesign this or am i wrong here?
> switch (ctrl->id) {
> case V4L2_CID_AUDIO_VOLUME:
> @@ -492,7 +494,9 @@ static int si470x_vidioc_g_ctrl(struct file *file, void
> *priv,
> retval = -EINVAL;
> }
>
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> done:
> +#endif
Probably something can be done with such constructions also if possible.
> if (retval < 0)
> printk(KERN_WARNING DRIVER_NAME
> ": get control failed with %d\n", retval);
> @@ -509,11 +513,13 @@ static int si470x_vidioc_s_ctrl(struct file *file,
> void *priv,
> struct si470x_device *radio = video_drvdata(file);
> int retval = 0;
>
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> /* safety checks */
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
>
> switch (ctrl->id) {
> case V4L2_CID_AUDIO_VOLUME:
> @@ -532,7 +538,9 @@ static int si470x_vidioc_s_ctrl(struct file *file, void
> *priv,
> retval = -EINVAL;
> }
>
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> done:
> +#endif
> if (retval < 0)
> printk(KERN_WARNING DRIVER_NAME
> ": set control failed with %d\n", retval);
> @@ -566,10 +574,12 @@ static int si470x_vidioc_g_tuner(struct file *file,
> void *priv,
> int retval = 0;
>
> /* safety checks */
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
> if (tuner->index != 0) {
> retval = -EINVAL;
> goto done;
> @@ -582,8 +592,12 @@ static int si470x_vidioc_g_tuner(struct file *file,
> void *priv,
> /* driver constants */
> strcpy(tuner->name, "FM");
> tuner->type = V4L2_TUNER_RADIO;
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
> V4L2_TUNER_CAP_RDS;
> +#else
> + tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
> +#endif
>
> /* range limits */
> switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) {
> @@ -609,10 +623,12 @@ static int si470x_vidioc_g_tuner(struct file *file,
> void *priv,
> tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
> else
> tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> /* If there is a reliable method of detecting an RDS channel,
> then this code should check for that before setting this
> RDS subchannel. */
> tuner->rxsubchans |= V4L2_TUNER_SUB_RDS;
> +#endif
>
> /* mono/stereo selector */
> if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
> @@ -648,10 +664,12 @@ static int si470x_vidioc_s_tuner(struct file *file,
> void *priv,
> int retval = -EINVAL;
>
> /* safety checks */
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
> if (tuner->index != 0)
> goto done;
>
> @@ -687,10 +705,12 @@ static int si470x_vidioc_g_frequency(struct file
> *file, void *priv,
> int retval = 0;
>
> /* safety checks */
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
> if (freq->tuner != 0) {
> retval = -EINVAL;
> goto done;
> @@ -717,10 +737,12 @@ static int si470x_vidioc_s_frequency(struct file
> *file, void *priv,
> int retval = 0;
>
> /* safety checks */
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
> if (freq->tuner != 0) {
> retval = -EINVAL;
> goto done;
> @@ -746,10 +768,12 @@ static int si470x_vidioc_s_hw_freq_seek(struct file
> *file, void *priv,
> int retval = 0;
>
> /* safety checks */
> +#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE)
> if (radio->disconnected) {
> retval = -EIO;
> goto done;
> }
> +#endif
> if (seek->tuner != 0) {
> retval = -EINVAL;
> goto done;
> diff --git a/linux/drivers/media/radio/si470x/radio-si470x-i2c.c
> b/linux/drivers/media/radio/si470x/radio-si470x-i2c.c
> new file mode 100644
> index 0000000..e7f3070
> --- /dev/null
> +++ b/linux/drivers/media/radio/si470x/radio-si470x-i2c.c
> @@ -0,0 +1,250 @@
> +/*
> + * drivers/media/radio/si470x/radio-si470x-i2c.c
> + *
> + * I2C driver for radios with Silicon Labs Si470x FM Radio Receivers
> + *
> + * Copyright (C) 2009 Samsung Electronics Co.Ltd
> + * Author: Joonyoung Shim <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License as published by
> the
> + * Free Software Foundation; either version 2 of the License, or (at
> your
> + * option) any later version.
> + *
> + *
> + * TODO:
> + * - RDS support
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +
> +#include "radio-si470x.h"
> +
> +#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 0)
> +#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
> +#define DRIVER_VERSION "1.0.0"
> +
> +/* starting with the upper byte of register 0x0a */
> +#define READ_REG_NUM RADIO_REGISTER_NUM
> +#define READ_INDEX(i) ((i + RADIO_REGISTER_NUM - 0x0a) %
> READ_REG_NUM)
> +
> +static int si470x_get_all_registers(struct si470x_device *radio)
> +{
> + int i;
> + u16 buf[READ_REG_NUM];
> + struct i2c_msg msgs[1] = {
> + { radio->client->addr, I2C_M_RD, sizeof(u16) * READ_REG_NUM,
> + (void *)buf },
> + };
> +
> + if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
> + return -EIO;
> +
> + for (i = 0; i < READ_REG_NUM; i++)
> + radio->registers[i] = __be16_to_cpu(buf[READ_INDEX(i)]);
> +
> + return 0;
> +}
> +
> +int si470x_get_register(struct si470x_device *radio, int regnr)
> +{
> + u16 buf[READ_REG_NUM];
> + struct i2c_msg msgs[1] = {
> + { radio->client->addr, I2C_M_RD, sizeof(u16) * READ_REG_NUM,
> + (void *)buf },
> + };
> +
> + if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
> + return -EIO;
> +
> + radio->registers[regnr] = __be16_to_cpu(buf[READ_INDEX(regnr)]);
> +
> + return 0;
> +}
> +
> +/* starting with the upper byte of register 0x02h */
> +#define WRITE_REG_NUM 8
> +#define WRITE_INDEX(i) (i + 0x02)
> +
> +int si470x_set_register(struct si470x_device *radio, int regnr)
> +{
> + int i;
> + u16 buf[WRITE_REG_NUM];
> + struct i2c_msg msgs[1] = {
> + { radio->client->addr, 0, sizeof(u16) * WRITE_REG_NUM,
> + (void *)buf },
> + };
> +
> + for (i = 0; i < WRITE_REG_NUM; i++)
> + buf[i] = __cpu_to_be16(radio->registers[WRITE_INDEX(i)]);
> +
> + if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int si470x_fops_open(struct file *file)
> +{
> + struct si470x_device *radio = video_drvdata(file);
> + int retval = 0;
> +
> + mutex_lock(&radio->lock);
> + radio->users++;
> +
> + if (radio->users == 1)
> + /* start radio */
> + retval = si470x_start(radio);
> + mutex_unlock(&radio->lock);
> +
> + return retval;
> +}
> +
> +static int si470x_fops_release(struct file *file)
> +{
> + struct si470x_device *radio = video_drvdata(file);
> + int retval = 0;
> +
> + /* safety check */
> + if (!radio)
> + return -ENODEV;
> +
> + mutex_lock(&radio->lock);
> + radio->users--;
> + if (radio->users == 0)
> + /* stop radio */
> + retval = si470x_stop(radio);
> + mutex_unlock(&radio->lock);
> +
> + return retval;
> +}
> +
> +const struct v4l2_file_operations si470x_fops = {
> + .owner = THIS_MODULE,
> + .ioctl = video_ioctl2,
> + .open = si470x_fops_open,
> + .release = si470x_fops_release,
> +};
> +
> +int si470x_vidioc_querycap(struct file *file, void *priv,
> + struct v4l2_capability *capability)
> +{
> + strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
> + strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
> + capability->version = DRIVER_KERNEL_VERSION;
> + capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
> + V4L2_CAP_TUNER | V4L2_CAP_RADIO;
> +
> + return 0;
> +}
> +
> +static int __devinit si470x_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct si470x_device *radio;
> + int retval = 0;
> +
> + /* private data allocation and initialization */
> + radio = kzalloc(sizeof(struct si470x_device), GFP_KERNEL);
> + if (!radio) {
> + retval = -ENOMEM;
> + goto err_initial;
> + }
> + radio->client = client;
> + radio->users = 0;
> + mutex_init(&radio->lock);
> +
> + /* video device allocation and initialization */
> + radio->videodev = video_device_alloc();
> + if (!radio->videodev) {
> + retval = -ENOMEM;
> + goto err_radio;
> + }
> + memcpy(radio->videodev, &si470x_viddev_template,
> + sizeof(si470x_viddev_template));
> + video_set_drvdata(radio->videodev, radio);
> +
> + /* power up : need 110ms */
> + radio->registers[POWERCFG] = POWERCFG_ENABLE;
> + if (si470x_set_register(radio, POWERCFG) < 0) {
> + retval = -EIO;
> + goto err_all;
> + }
> + msleep(110);
> +
> + /* show some infos about the specific si470x device */
> + if (si470x_get_all_registers(radio) < 0) {
> + retval = -EIO;
> + goto err_radio;
> + }
> + printk(KERN_INFO DRIVER_NAME ": DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",
> + radio->registers[DEVICEID], radio->registers[CHIPID]);
> +
> + /* set initial frequency */
> + si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
> +
> + /* register video device */
> + retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, -1);
> + if (retval) {
> + printk(KERN_WARNING DRIVER_NAME
> + ": Could not register video device\n");
> + goto err_all;
> + }
> +
> + i2c_set_clientdata(client, radio);
> +
> + return 0;
> +err_all:
> + video_device_release(radio->videodev);
> +err_radio:
> + kfree(radio);
> +err_initial:
> + return retval;
> +}
> +
> +static __devexit int si470x_i2c_remove(struct i2c_client *client)
> +{
> + struct si470x_device *radio = i2c_get_clientdata(client);
> +
> + video_unregister_device(radio->videodev);
> + kfree(radio);
> + i2c_set_clientdata(client, NULL);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id si470x_i2c_id[] = {
> + { "si470x", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, si470x_i2c_id);
> +
> +static struct i2c_driver si470x_i2c_driver = {
> + .driver = {
> + .name = "si470x",
> + .owner = THIS_MODULE,
> + },
> + .probe = si470x_i2c_probe,
> + .remove = __devexit_p(si470x_i2c_remove),
> + .id_table = si470x_i2c_id,
> +};
> +
> +static int __init si470x_i2c_init(void)
> +{
> + return i2c_add_driver(&si470x_i2c_driver);
> +}
> +module_init(si470x_i2c_init);
> +
> +static void __exit si470x_i2c_exit(void)
> +{
> + i2c_del_driver(&si470x_i2c_driver);
> +}
> +module_exit(si470x_i2c_exit);
> +
> +MODULE_DESCRIPTION("i2c radio driver for si470x fm radio receivers");
> +MODULE_AUTHOR("Joonyoung Shim <[email protected]>");
> +MODULE_LICENSE("GPL");
Please, move this information to the top of file to see this
information fast when you suddenly open source file.
--
Best regards, Klimov Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
