From: Muralidharan Karicheri <m-kariche...@ti.com>
This patch makes the following changes:-
1) Modify vpif_subdev_info to add board_info, routing information
and vpif interface configuration. Remove addr since it is
part of board_info
2) Add code to setup channel mode and input decoder path for
vpif capture driver
NOTE: This patch is dependent on the patch from Chaithrika for vpif display.
Also
the arch sepcific files are manually merged to linux-davinci tree before
creating
this patch. So this is only for review. Final patch to be merged will be created
later
Mandatory reviewers : Hans Verkuil <hverk...@xs4all.nl>
Kevin Hilman <khil...@deeprootsystems.com>
Signed-off-by: Muralidharan Karicheri <m-kariche...@ti.com>
---
arch/arm/mach-davinci/board-dm646x-evm.c | 179 +++++++++++++++++++++++++-
arch/arm/mach-davinci/dm646x.c | 54 +++++++-
arch/arm/mach-davinci/include/mach/dm646x.h | 50 +++++++-
3 files changed, 263 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c
b/arch/arm/mach-davinci/board-dm646x-evm.c
index 38a1022..cb4246b 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -33,7 +33,7 @@
#include <linux/i2c/at24.h>
#include <linux/i2c/pcf857x.h>
#include <linux/etherdevice.h>
-
+#include <media/tvp514x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -75,6 +75,14 @@
#define VIDCH2CLK (BIT(10))
#define VIDCH3CLK (BIT(11))
+#define VIDCH1CLK (BIT(4))
+#define TVP7002_INPUT (BIT(4))
+#define TVP5147_INPUT (~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL (BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL (~BIT(5))
+#define TVP5147_CH0 "tvp514x-0"
+#define TVP5147_CH1 "tvp514x-1"
+
static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
@@ -348,7 +356,7 @@ static struct i2c_board_info __initdata i2c_info[] = {
I2C_BOARD_INFO("cpld_reg0", 0x3a),
},
{
- I2C_BOARD_INFO("cpld_video", 0x3B),
+ I2C_BOARD_INFO("cpld_video", 0x3b),
},
};
@@ -400,14 +408,18 @@ static int set_vpif_clock(int mux_mode, int hd)
return 0;
}
-static const struct vpif_subdev_info dm646x_vpif_subdev[] = {
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
{
- .addr = 0x2A,
.name = "adv7343",
+ .board_info = {
+ I2C_BOARD_INFO("adv7343", 0x2a),
+ },
},
{
- .addr = 0x2C,
.name = "ths7303",
+ .board_info = {
+ I2C_BOARD_INFO("ths7303", 0x2c),
+ },
},
};
@@ -417,7 +429,7 @@ static const char *output[] = {
"S-Video",
};
-static struct vpif_config dm646x_vpif_config = {
+static struct vpif_display_config dm646x_vpif_display_config = {
.set_clock = set_vpif_clock,
.subdevinfo = dm646x_vpif_subdev,
.subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
@@ -426,6 +438,158 @@ static struct vpif_config dm646x_vpif_config = {
.card_name = "DM646x EVM",
};
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+ int err = 0;
+ int val;
+
+ /* for channel 1, we don't do anything */
+ if (channel != 0)
+ return 0;
+
+ if (NULL == cpld_client)
+ return -EFAULT;
+
+ val = i2c_smbus_read_byte(cpld_client);
+ if (val < 0)
+ return val;
+
+ if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+ !strcmp(sub_dev_name, TVP5147_CH1))
+ val &= TVP5147_INPUT;
+ else
+ val |= TVP7002_INPUT;
+
+ err = i2c_smbus_write_byte(cpld_client, val);
+ if (err)
+ return err;
+ return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+ int err = 0;
+ int val;
+ u32 value;
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+ val = i2c_smbus_read_byte(cpld_client);
+ if (val < 0)
+ return val;
+
+ value = __raw_readl(base + VSCLKDIS_OFFSET);
+ if (mux_mode) {
+ val &= VPIF_INPUT_TWO_CHANNEL;
+ value |= VIDCH1CLK;
+ } else {
+ val |= VPIF_INPUT_ONE_CHANNEL;
+ value &= ~VIDCH1CLK;
+ }
+ __raw_writel(value, base + VSCLKDIS_OFFSET);
+
+ err = i2c_smbus_write_byte(cpld_client, val);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+ {
+ .name = TVP5147_CH0,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .can_route = 1,
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ {
+ .name = TVP5147_CH1,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5c),
+ .platform_data = &tvp5146_pdata,
+ },
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .can_route = 1,
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ .subdev_name = TVP5147_CH0,
+ },
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ .subdev_name = TVP5147_CH1,
+ },
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+ .setup_input_path = setup_vpif_input_path,
+ .setup_input_channel_mode = setup_vpif_input_channel_mode,
+ .subdev_info = vpif_capture_sdev_info,
+ .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+ .chan_config[0] = {
+ .inputs = dm6467_ch0_inputs,
+ .input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+ },
+ .chan_config[1] = {
+ .inputs = dm6467_ch1_inputs,
+ .input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+ },
+};
+
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
@@ -453,7 +617,8 @@ static __init void evm_init(void)
soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
- dm646x_setup_vpif(&dm646x_vpif_config);
+ dm646x_setup_vpif(&dm646x_vpif_display_config,
+ &dm646x_vpif_capture_cfg);
}
static __init void davinci_dm646x_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index fc02f22..4ee3b6f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -613,9 +613,23 @@ static u64 vpif_dma_mask = DMA_BIT_MASK(32);
static struct resource vpif_resource[] = {
{
.start = DAVINCI_VPIF_BASE,
- .end = DAVINCI_VPIF_BASE + 0x03fff,
+ .end = DAVINCI_VPIF_BASE + 0x03ff,
.flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device vpif_dev = {
+ .name = "vpif",
+ .id = -1,
+ .dev = {
+ .dma_mask = &vpif_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
+ .resource = vpif_resource,
+ .num_resources = ARRAY_SIZE(vpif_resource),
+};
+
+static struct resource vpif_display_resource[] = {
{
.start = IRQ_DM646X_VP_VERTINT2,
.end = IRQ_DM646X_VP_VERTINT2,
@@ -633,10 +647,34 @@ static struct platform_device vpif_display_dev = {
.id = -1,
.dev = {
.dma_mask = &vpif_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
- .resource = vpif_resource,
- .num_resources = ARRAY_SIZE(vpif_resource),
+ .resource = vpif_display_resource,
+ .num_resources = ARRAY_SIZE(vpif_display_resource),
+};
+
+static struct resource vpif_capture_resource[] = {
+ {
+ .start = IRQ_DM646X_VP_VERTINT0,
+ .end = IRQ_DM646X_VP_VERTINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_VP_VERTINT1,
+ .end = IRQ_DM646X_VP_VERTINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device vpif_capture_dev = {
+ .name = "vpif_capture",
+ .id = -1,
+ .dev = {
+ .dma_mask = &vpif_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = vpif_capture_resource,
+ .num_resources = ARRAY_SIZE(vpif_capture_resource),
};
static struct resource ide_resources[] = {
@@ -853,7 +891,8 @@ void __init dm646x_init_mcasp1(struct snd_platform_data
*pdata)
platform_device_register(&dm646x_dit_device);
}
-void dm646x_setup_vpif(struct vpif_config *config)
+void dm646x_setup_vpif(struct vpif_display_config *display_config,
+ struct vpif_capture_config *capture_config)
{
unsigned int value;
void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
@@ -871,8 +910,11 @@ void dm646x_setup_vpif(struct vpif_config *config)
davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
- vpif_display_dev.dev.platform_data = config;
+ vpif_display_dev.dev.platform_data = display_config;
+ vpif_capture_dev.dev.platform_data = capture_config;
+ platform_device_register(&vpif_dev);
platform_device_register(&vpif_display_dev);
+ platform_device_register(&vpif_capture_dev);
}
void __init dm646x_init(void)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h
b/arch/arm/mach-davinci/include/mach/dm646x.h
index 737b549..b639142 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -14,6 +14,8 @@
#include <mach/hardware.h>
#include <mach/emac.h>
#include <mach/asp.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
#define DM646X_EMAC_BASE (0x01C80000)
#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
@@ -24,30 +26,64 @@
#define DM646X_ATA_REG_BASE (0x01C66000)
-struct vpif_output {
- u16 id;
- const char *name;
+enum vpif_if_type {
+ VPIF_IF_BT656,
+ VPIF_IF_BT1120,
+ VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+ enum vpif_if_type if_type;
+ unsigned hd_pol:1;
+ unsigned vd_pol:1;
+ unsigned fid_pol:1;
};
struct vpif_subdev_info {
- unsigned short addr;
const char *name;
+ struct i2c_board_info board_info;
+ u32 input;
+ u32 output;
+ unsigned can_route:1;
+ struct vpif_interface vpif_if;
};
-struct vpif_config {
+struct vpif_display_config {
int (*set_clock)(int, int);
- const struct vpif_subdev_info *subdevinfo;
+ struct vpif_subdev_info *subdevinfo;
int subdev_count;
const char **output;
int output_count;
const char *card_name;
};
+struct vpif_input {
+ struct v4l2_input input;
+ const char *subdev_name;
+};
+
+#define VPIF_CAPTURE_MAX_CHANNELS 2
+
+struct vpif_capture_chan_config {
+ const struct vpif_input *inputs;
+ int input_count;
+};
+
+struct vpif_capture_config {
+ int (*setup_input_channel_mode)(int);
+ int (*setup_input_path)(int, const char *);
+ struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+ struct vpif_subdev_info *subdev_info;
+ int subdev_count;
+ const char *card_name;
+};
+
void __init dm646x_init(void);
void __init dm646x_init_ide(void);
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
void dm646x_video_init(void);
-void dm646x_setup_vpif(struct vpif_config *config);
+void dm646x_setup_vpif(struct vpif_display_config *,
+ struct vpif_capture_config *);
#endif /* __ASM_ARCH_DM646X_H */
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
