Add the register needed to work with Gen3 hardware. This patch just adds
the logic for how to work with the Gen3 hardware. More work is required
to enable the subdevice structure needed to support capturing.

Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  | 97 ++++++++++++++++++++---------
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 ++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  1 +
 3 files changed, 79 insertions(+), 34 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c 
b/drivers/media/platform/rcar-vin/rcar-dma.c
index 7e571a8..d63b186 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -33,21 +33,23 @@
 #define VNELPRC_REG    0x10    /* Video n End Line Pre-Clip Register */
 #define VNSPPRC_REG    0x14    /* Video n Start Pixel Pre-Clip Register */
 #define VNEPPRC_REG    0x18    /* Video n End Pixel Pre-Clip Register */
-#define VNSLPOC_REG    0x1C    /* Video n Start Line Post-Clip Register */
-#define VNELPOC_REG    0x20    /* Video n End Line Post-Clip Register */
-#define VNSPPOC_REG    0x24    /* Video n Start Pixel Post-Clip Register */
-#define VNEPPOC_REG    0x28    /* Video n End Pixel Post-Clip Register */
 #define VNIS_REG       0x2C    /* Video n Image Stride Register */
 #define VNMB_REG(m)    (0x30 + ((m) << 2)) /* Video n Memory Base m Register */
 #define VNIE_REG       0x40    /* Video n Interrupt Enable Register */
 #define VNINTS_REG     0x44    /* Video n Interrupt Status Register */
 #define VNSI_REG       0x48    /* Video n Scanline Interrupt Register */
 #define VNMTC_REG      0x4C    /* Video n Memory Transfer Control Register */
-#define VNYS_REG       0x50    /* Video n Y Scale Register */
-#define VNXS_REG       0x54    /* Video n X Scale Register */
 #define VNDMR_REG      0x58    /* Video n Data Mode Register */
 #define VNDMR2_REG     0x5C    /* Video n Data Mode Register 2 */
 #define VNUVAOF_REG    0x60    /* Video n UV Address Offset Register */
+
+/* Register offsets specific for Gen2 */
+#define VNSLPOC_REG    0x1C    /* Video n Start Line Post-Clip Register */
+#define VNELPOC_REG    0x20    /* Video n End Line Post-Clip Register */
+#define VNSPPOC_REG    0x24    /* Video n Start Pixel Post-Clip Register */
+#define VNEPPOC_REG    0x28    /* Video n End Pixel Post-Clip Register */
+#define VNYS_REG       0x50    /* Video n Y Scale Register */
+#define VNXS_REG       0x54    /* Video n X Scale Register */
 #define VNC1A_REG      0x80    /* Video n Coefficient Set C1A Register */
 #define VNC1B_REG      0x84    /* Video n Coefficient Set C1B Register */
 #define VNC1C_REG      0x88    /* Video n Coefficient Set C1C Register */
@@ -73,9 +75,13 @@
 #define VNC8B_REG      0xF4    /* Video n Coefficient Set C8B Register */
 #define VNC8C_REG      0xF8    /* Video n Coefficient Set C8C Register */
 
+/* Register offsets specific for Gen3 */
+#define VNCSI_IFMD_REG         0x20 /* Video n CSI2 Interface Mode Register */
 
 /* Register bit fields for R-Car VIN */
 /* Video n Main Control Register bits */
+#define VNMC_DPINE             (1 << 27) /* Gen3 specific */
+#define VNMC_SCLE              (1 << 26) /* Gen3 specific */
 #define VNMC_FOC               (1 << 21)
 #define VNMC_YCAL              (1 << 19)
 #define VNMC_INF_YUV8_BT656    (0 << 16)
@@ -118,6 +124,12 @@
 #define VNDMR2_FTEV            (1 << 17)
 #define VNDMR2_VLV(n)          ((n & 0xf) << 12)
 
+/* Video n CSI2 Interface Mode Register (Gen3) */
+#define VNCSI_IFMD_DES2                (1 << 27)
+#define VNCSI_IFMD_DES1                (1 << 26)
+#define VNCSI_IFMD_DES0                (1 << 25)
+#define VNCSI_IFMD_CSI_CHSEL(n) ((n & 0xf) << 0)
+
 static void rvin_write(struct rvin_dev *vin, u32 value, u32 offset)
 {
        iowrite32(value, vin->base + offset);
@@ -196,7 +208,10 @@ static int rvin_setup(struct rvin_dev *vin)
        }
 
        /* Enable VSYNC Field Toogle mode after one VSYNC input */
-       dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
+       if (vin->chip == RCAR_GEN3)
+               dmr2 = VNDMR2_FTEV;
+       else
+               dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
        /* Hsync Signal Polarity Select */
        if (!(mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
@@ -248,6 +263,14 @@ static int rvin_setup(struct rvin_dev *vin)
        if (input_is_yuv == output_is_yuv)
                vnmc |= VNMC_BPS;
 
+       if (vin->chip == RCAR_GEN3) {
+               /* Select between CSI-2 and Digital input */
+               if (mbus_cfg.type == V4L2_MBUS_CSI2)
+                       vnmc &= ~VNMC_DPINE;
+               else
+                       vnmc |= VNMC_DPINE;
+       }
+
        /* Progressive or interlaced mode */
        interrupts = progressive ? VNIE_FIE : VNIE_EFE;
 
@@ -738,28 +761,10 @@ static void rvin_set_coeff(struct rvin_dev *vin, unsigned 
short xs)
        rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
 }
 
-void rvin_crop_scale_comp(struct rvin_dev *vin)
+static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
 {
        u32 xs, ys;
 
-       /* Set Start/End Pixel/Line Pre-Clip */
-       rvin_write(vin, vin->crop.left, VNSPPRC_REG);
-       rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
-       switch (vin->format.field) {
-       case V4L2_FIELD_INTERLACED:
-       case V4L2_FIELD_INTERLACED_TB:
-       case V4L2_FIELD_INTERLACED_BT:
-               rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
-               rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
-                          VNELPRC_REG);
-               break;
-       default:
-               rvin_write(vin, vin->crop.top, VNSLPRC_REG);
-               rvin_write(vin, vin->crop.top + vin->crop.height - 1,
-                          VNELPRC_REG);
-               break;
-       }
-
        /* Set scaling coefficient */
        ys = 0;
        if (vin->crop.height != vin->compose.height)
@@ -797,11 +802,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
                break;
        }
 
-       if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
-               rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
-       else
-               rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
-
        vin_dbg(vin,
                "Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n",
                vin->crop.width, vin->crop.height, vin->crop.left,
@@ -809,9 +809,44 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
                0, 0);
 }
 
+void rvin_crop_scale_comp(struct rvin_dev *vin)
+{
+       /* Set Start/End Pixel/Line Pre-Clip */
+       rvin_write(vin, vin->crop.left, VNSPPRC_REG);
+       rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
+
+       switch (vin->format.field) {
+       case V4L2_FIELD_INTERLACED:
+       case V4L2_FIELD_INTERLACED_TB:
+       case V4L2_FIELD_INTERLACED_BT:
+               rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
+               rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
+                          VNELPRC_REG);
+               break;
+       default:
+               rvin_write(vin, vin->crop.top, VNSLPRC_REG);
+               rvin_write(vin, vin->crop.top + vin->crop.height - 1,
+                          VNELPRC_REG);
+               break;
+       }
+
+       /* TODO: Add support for the UDS scaler. */
+       if (vin->chip != RCAR_GEN3)
+               rvin_crop_scale_comp_gen2(vin);
+
+       if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
+               rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
+       else
+               rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
+}
+
 void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
                    u32 width, u32 height)
 {
+       /* TODO: Add support for the UDS scaler. */
+       if (vin->chip == RCAR_GEN3)
+               return;
+
        /* All VIN channels on Gen2 have scalers */
        pix->width = width;
        pix->height = height;
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c 
b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 1b4b1dc..2eb86b0 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -25,6 +25,8 @@
 #define RVIN_DEFAULT_FORMAT    V4L2_PIX_FMT_YUYV
 #define RVIN_MAX_WIDTH         2048
 #define RVIN_MAX_HEIGHT                2048
+#define RVIN_MAX_WIDTH_GEN3    4096
+#define RVIN_MAX_HEIGHT_GEN3   4096
 
 /* 
-----------------------------------------------------------------------------
  * Format Conversions
@@ -139,7 +141,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
                             struct rvin_source_fmt *source)
 {
        const struct rvin_video_format *info;
-       u32 rwidth, rheight, walign;
+       u32 rwidth, rheight, walign, max_width, max_height;
 
        /* Requested */
        rwidth = pix->width;
@@ -173,8 +175,15 @@ static int __rvin_try_format(struct rvin_dev *vin,
        walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
 
        /* Limit to VIN capabilities */
-       v4l_bound_align_image(&pix->width, 2, RVIN_MAX_WIDTH, walign,
-                             &pix->height, 4, RVIN_MAX_HEIGHT, 2, 0);
+       if (vin->chip == RCAR_GEN3) {
+               max_width = RVIN_MAX_WIDTH_GEN3;
+               max_height = RVIN_MAX_HEIGHT_GEN3;
+       } else {
+               max_width = RVIN_MAX_WIDTH;
+               max_height = RVIN_MAX_HEIGHT;
+       }
+       v4l_bound_align_image(&pix->width, 2, max_width, walign,
+                             &pix->height, 4, max_height, 2, 0);
 
        switch (pix->field) {
        case V4L2_FIELD_NONE:
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h 
b/drivers/media/platform/rcar-vin/rcar-vin.h
index d58a8c1..9aa29ae 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -33,6 +33,7 @@ enum chip_id {
        RCAR_H1,
        RCAR_M1,
        RCAR_GEN2,
+       RCAR_GEN3,
 };
 
 #define RVIN_INPUT_MAX 1
-- 
2.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to