From: Hans Verkuil <hans.verk...@cisco.com>
Get the clock for this sensor.
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
drivers/media/i2c/ov7670.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index fe527b2..57adf3d 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -10,6 +10,7 @@
* This file may be distributed under the terms of the GNU General
* Public License, version 2.
*/
+#include <linux/clk.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -18,6 +19,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-clk.h>
#include <media/v4l2-mediabus.h>
#include <media/v4l2-image-sizes.h>
#include <media/i2c/ov7670.h>
@@ -228,6 +230,7 @@ struct ov7670_info {
struct v4l2_ctrl *hue;
};
struct ov7670_format_struct *fmt; /* Current format */
+ struct v4l2_clk *clk;
int min_width; /* Filter out smaller sizes */
int min_height; /* Filter out smaller sizes */
int clock_speed; /* External clock speed (MHz) */
@@ -1588,8 +1591,19 @@ static int ov7670_probe(struct i2c_client *client,
info->pclk_hb_disable = true;
}
+ info->clk = v4l2_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(info->clk))
+ return -EPROBE_DEFER;
+ v4l2_clk_enable(info->clk);
+
+ info->clock_speed = v4l2_clk_get_rate(info->clk) / 1000000;
+ if (info->clock_speed < 12 ||
+ info->clock_speed > 48)
+ return -EINVAL;
+
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
+
if (ret) {
v4l_dbg(1, debug, client,
"chip found @ 0x%x (%s) is not an ov7670 chip.\n",
@@ -1682,6 +1696,7 @@ static int ov7670_remove(struct i2c_client *client)
#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&sd->entity);
#endif
+ v4l2_clk_put(info->clk);
return 0;
}
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
