Since commit 04f59143b571161d25315dd52d7a2ecc022cb71a
("i2c: let I2C masters ignore their children for PM")
the power.ignore_children flag is set when registering an I2C
adapter. Since I2C transfers are not managed by the fimc-isp-i2c
driver its clients use pm_runtime_* calls directly to communicate
required power state of the bus controller.
However when the power.ignore_children flag is set that doesn't
work, so clear that flag back after registering the adapter.
While at it drop pm_runtime_enable() call on the i2c_adapter
as it is already done by the I2C subsystem when registering
I2C adapter.

Cc: <[email protected]> # 4.7+
Reported-by: Marek Szyprowski <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
---
 drivers/media/platform/exynos4-is/fimc-is-i2c.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c 
b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
index 7521aa5..03b4246 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-i2c.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
@@ -55,26 +55,37 @@ static int fimc_is_i2c_probe(struct platform_device *pdev)
        i2c_adap->algo = &fimc_is_i2c_algorithm;
        i2c_adap->class = I2C_CLASS_SPD;
 
+       platform_set_drvdata(pdev, isp_i2c);
+       pm_runtime_enable(&pdev->dev);
+
        ret = i2c_add_adapter(i2c_adap);
        if (ret < 0) {
                dev_err(&pdev->dev, "failed to add I2C bus %s\n",
                                                node->full_name);
-               return ret;
+               goto err_pm_dis;
        }
 
-       platform_set_drvdata(pdev, isp_i2c);
-
-       pm_runtime_enable(&pdev->dev);
-       pm_runtime_enable(&i2c_adap->dev);
-
+       /*
+        * Client drivers of this adapter don't do any I2C transfers as that
+        * is handled by the ISP firmware.  But we rely on the runtime PM
+        * state propagation from the clients up to the adapter driver so
+        * clear the ignore_children flags here.  PM rutnime calls are not
+        * used in probe() handler of clients of this adapter so there is
+        * no issues with clearing the flag right after registering the I2C
+        * adapter.
+        */
+       pm_suspend_ignore_children(&i2c_adap->dev, false);
        return 0;
+
+err_pm_dis:
+       pm_runtime_disable(&pdev->dev);
+       return ret;
 }
 
 static int fimc_is_i2c_remove(struct platform_device *pdev)
 {
        struct fimc_is_i2c *isp_i2c = platform_get_drvdata(pdev);
 
-       pm_runtime_disable(&isp_i2c->adapter.dev);
        pm_runtime_disable(&pdev->dev);
        i2c_del_adapter(&isp_i2c->adapter);
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to