Hi Felipe,
On 2016/9/23 15:49, Felipe Balbi wrote:
Hi,
Bin Liu <b-...@ti.com> writes:
+Fengwei Yin per his request.
On Thu, Sep 22, 2016 at 10:48:40PM +0300, Felipe Balbi wrote:
Hi,
Bin Liu <b-...@ti.com> writes:
[...]
Here's one that actually compiles, sorry about that.
No worries, I was sleeping ;-)
I will test it out early next week. Thanks.
meanwhile, how about some instructions on how to test this out myself?
How are you using g_webcam and what are you running on host side? Got a
nice list of commands there I can use? I think I can get to bottom of
this much quicker if I can reproduce it locally ;-)
On device side:
- first patch g_webcam as in my first email in this thread to enable
640x480@30fps;
- # modprobe g_webcam streaming_maxpacket=3072
- then run uvc-gadget to feed the YUV frames;
http://git.ideasonboard.org/uvc-gadget.git
as is, g_webcam never enumerates to the host. It's calls to
usb_function_active() and usb_function_deactivate() are unbalanced. Do
you have any other changes to g_webcam?
With uvc function gadget driver, user daemon uvc-gadget must be started
before connect to host. Not sure whether g_webcam has same requirement.
Also, uvc-gadget.git doesn't compile, had to modify it a bit:
-#include "../drivers/usb/gadget/uvc.h"
+#include "../drivers/usb/gadget/function/uvc.h"
Also fixed a build warning:
@@ -732,6 +732,8 @@ int main(int argc, char *argv[])
fd_set wfds = fds;
ret = select(dev->fd + 1, NULL, &wfds, &efds, NULL);
+ if (ret < 0)
+ return ret;
if (FD_ISSET(dev->fd, &efds))
uvc_events_process(dev);
if (FD_ISSET(dev->fd, &wfds))
Laurent, have you tested g_webcam recently? What's the magic to get it
working?
Here's what I get out of dmesg:
[ 58.568380] usb 1-9: new high-speed USB device number 5 using xhci_hcd
[ 58.738680] usb 1-9: New USB device found, idVendor=1d6b, idProduct=0102
[ 58.738683] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 58.738685] usb 1-9: Product: Webcam gadget
[ 58.738687] usb 1-9: Manufacturer: Linux Foundation
[ 58.739133] g_webcam gadget: high-speed config #1: Video
[ 58.739138] g_webcam gadget: uvc_function_set_alt(0, 0)
[ 58.739139] g_webcam gadget: reset UVC Control
[ 58.739149] g_webcam gadget: uvc_function_set_alt(1, 0)
[ 58.804369] uvcvideo: Found UVC 1.00 device Webcam gadget (1d6b:0102)
[ 58.804479] g_webcam gadget: uvc_function_set_alt(1, 0)
[ 64.188459] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported.
Enabling workaround.
Looks like you connect your usb device to your usb host port on same
board. Nice.
The GET_DEF is handled by user daemon uvc-gadget. It may be related.
Regards
Yin, Fengwei
[ 69.307458] uvcvideo: Failed to query (129) UVC probe control : -110 (exp.
26).
[ 69.307459] uvcvideo: Failed to initialize the device (-5).
[ 69.307505] usbcore: registered new interface driver uvcvideo
[ 69.307506] USB Video Class driver (1.1.1)
[ 146.646012] ------------[ cut here ]------------
[ 146.646023] WARNING: CPU: 0 PID: 2616 at drivers/usb/gadget/composite.c:371
usb_function_activate+0x77/0x80 [libcomposite]
[ 146.646024] Modules linked in: uvcvideo g_webcam usb_f_uvc videobuf2_vmalloc
videobuf2_memops videobuf2_v4l2 videobuf2_core videodev libcomposite kvm_intel
kvm psmouse e1000e input_leds hid_generic usbhid atkbd irqbypass evdev
[ 146.646054] CPU: 0 PID: 2616 Comm: gst-launch-1.0 Not tainted
4.8.0-rc7-next-20160922-00004-gc71031593917-dirty #20
[ 146.646055] Hardware name: Intel Corporation Skylake Client platform/Skylake
Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B097.B02.1509020030 09/02/2015
[ 146.646058] ffffc9000769bb70
[ 146.646059] ffffffff8132d415
[ 146.646060] 0000000000000000
[ 146.646061] 0000000000000000
[ 146.646063] ffffc9000769bbb0
[ 146.646063] ffffffff8105ec1b
[ 146.646064] 000001730769bb90
[ 146.646066] 00000000ffffffea
[ 146.646070] ffff88016c03a150
[ 146.646072] 0000000000000282 ffff88016d793000 ffffc9000769befc
[ 146.646077] Call Trace:
[ 146.646086] [<ffffffff8132d415>] dump_stack+0x68/0x93
[ 146.646090] [<ffffffff8105ec1b>] __warn+0xcb/0xf0
[ 146.646095] [<ffffffff8105ed0d>] warn_slowpath_null+0x1d/0x20
[ 146.646099] [<ffffffffa03f1ea7>] usb_function_activate+0x77/0x80
[libcomposite]
[ 146.646105] [<ffffffffa044a6de>] uvc_function_connect+0x1e/0x40 [usb_f_uvc]
[ 146.646110] [<ffffffffa044b2ae>] uvc_v4l2_open+0x6e/0x80 [usb_f_uvc]
[ 146.646116] [<ffffffffa04014f0>] v4l2_open+0xa0/0x100 [videodev]
[ 146.646121] [<ffffffff811a5431>] chrdev_open+0xa1/0x1d0
[ 146.646125] [<ffffffff811a5390>] ? cdev_put+0x30/0x30
[ 146.646129] [<ffffffff8119dd60>] do_dentry_open.isra.17+0x150/0x2e0
[ 146.646133] [<ffffffff8119f115>] vfs_open+0x45/0x60
[ 146.646137] [<ffffffff811af1ed>] path_openat+0x62d/0x1370
[ 146.646141] [<ffffffff811b0094>] ? putname+0x54/0x60
[ 146.646146] [<ffffffff811b10ce>] do_filp_open+0x7e/0xe0
[ 146.646150] [<ffffffff81083868>] ? preempt_count_sub+0x48/0x70
[ 146.646154] [<ffffffff816f07d6>] ? _raw_spin_unlock+0x16/0x30
[ 146.646160] [<ffffffff811bf009>] ? __alloc_fd+0xc9/0x180
[ 146.646164] [<ffffffff8119f4e3>] do_sys_open+0x123/0x200
[ 146.646170] [<ffffffff8119f5de>] SyS_open+0x1e/0x20
[ 146.646174] [<ffffffff816f0e2a>] entry_SYSCALL_64_fastpath+0x18/0xa8
[ 146.646177] ---[ end trace 1a4f7b9817d19b04 ]---
[ 146.646180] g_webcam gadget: UVC connect failed with -22
[ 146.653808] usb 1-9: USB disconnect, device number 5
[ 146.653986] g_webcam gadget: UVC disconnect failed with -110
And dwc3 trace:
# tracer: nop
#
# entries-in-buffer/entries-written: 445/445 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
modprobe-2560 [001] .... 35.602546: dwc3_alloc_request: ep0out: req
ffff88016c03ad80 length 0/0 zsI ==> 0
modprobe-2560 [001] .... 35.602566: dwc3_alloc_request: ep0out: req
ffff88016c03acc0 length 0/0 zsI ==> 0
modprobe-2560 [001] d..1 35.602725: dwc3_gadget: Enabling ep0out
modprobe-2560 [001] d..1 35.602730: dwc3_gadget_ep_cmd: ep0out: cmd
'Start New Configuration' [1033] params 00000000 00000000 00000000 --> status:
Successful
modprobe-2560 [001] d..1 35.602829: dwc3_gadget_ep_cmd: ep0out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.602920: dwc3_gadget_ep_cmd: ep0in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603012: dwc3_gadget_ep_cmd: ep1out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603104: dwc3_gadget_ep_cmd: ep1in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603195: dwc3_gadget_ep_cmd: ep2out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603286: dwc3_gadget_ep_cmd: ep2in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603378: dwc3_gadget_ep_cmd: ep3out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603470: dwc3_gadget_ep_cmd: ep3in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603561: dwc3_gadget_ep_cmd: ep4out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603652: dwc3_gadget_ep_cmd: ep4in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603744: dwc3_gadget_ep_cmd: ep5out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603836: dwc3_gadget_ep_cmd: ep5in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.603927: dwc3_gadget_ep_cmd: ep6out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604018: dwc3_gadget_ep_cmd: ep6in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604110: dwc3_gadget_ep_cmd: ep7out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604202: dwc3_gadget_ep_cmd: ep7in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604294: dwc3_gadget_ep_cmd: ep8out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604386: dwc3_gadget_ep_cmd: ep8in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604477: dwc3_gadget_ep_cmd: ep9out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604568: dwc3_gadget_ep_cmd: ep9in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604660: dwc3_gadget_ep_cmd: ep10out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604751: dwc3_gadget_ep_cmd: ep10in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604843: dwc3_gadget_ep_cmd: ep11out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.604934: dwc3_gadget_ep_cmd: ep11in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605026: dwc3_gadget_ep_cmd: ep12out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605117: dwc3_gadget_ep_cmd: ep12in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605209: dwc3_gadget_ep_cmd: ep13out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605301: dwc3_gadget_ep_cmd: ep13in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605392: dwc3_gadget_ep_cmd: ep14out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605483: dwc3_gadget_ep_cmd: ep14in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605575: dwc3_gadget_ep_cmd: ep15out: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605667: dwc3_gadget_ep_cmd: ep15in: cmd
'Set Endpoint Transfer Resource' [1026] params 00000001 00000000 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605941: dwc3_gadget_ep_cmd: ep0out: cmd
'Set Endpoint Configuration' [1025] params 00001000 00000500 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.605944: dwc3_gadget: Enabling ep0in
modprobe-2560 [001] d..1 35.606216: dwc3_gadget_ep_cmd: ep0in: cmd
'Set Endpoint Configuration' [1025] params 00001000 02000500 00000000 -->
status: Successful
modprobe-2560 [001] d..1 35.606219: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
modprobe-2560 [001] d..1 35.606222: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
v4l_id-2582 [001] d..2 35.607976: dwc3_gadget: gadget g_webcam
data soft-connect
v4l_id-2582 [001] d..2 35.608042: dwc3_gadget: gadget g_webcam
data soft-disconnect
uvc-gadget-2598 [003] d..2 58.206076: dwc3_gadget: gadget g_webcam
data soft-connect
irq/17-dwc3-2578 [001] d..1 58.412564: dwc3_event: event (00000101):
Reset [U0]
irq/17-dwc3-2578 [001] d..1 58.469611: dwc3_event: event (00000201):
Connection Done [U0]
irq/17-dwc3-2578 [001] d..1 58.469622: dwc3_gadget: Enabling ep0out
irq/17-dwc3-2578 [001] d..1 58.469626: dwc3_gadget_ep_cmd: ep0out: cmd
'Set Endpoint Configuration' [1025] params 80000200 00000500 00000000 -->
status: Successful
irq/17-dwc3-2578 [001] d..1 58.469628: dwc3_gadget: Enabling ep0in
irq/17-dwc3-2578 [001] d..1 58.469632: dwc3_gadget_ep_cmd: ep0in: cmd
'Set Endpoint Configuration' [1025] params 80000200 02000500 00000000 -->
status: Successful
irq/17-dwc3-2578 [001] d..1 58.568509: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.568512: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.568513: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.568514: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0100 wIndex 0000 wLength 64
irq/17-dwc3-2578 [001] d..1 58.568515: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.568518: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 18 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.568521: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 000000008025e000 size 18 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.568531: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.568534: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.568535: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.568536: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.568641: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.568642: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.568642: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.568643: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 000000008025e000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.568644: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 18/18 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.568645: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.568645: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.568646: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.568646: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.568653: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.568790: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.568792: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.568793: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.568793: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.568794: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.568798: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.572389: dwc3_event: event (00000101):
Reset [U0]
irq/17-dwc3-2578 [001] d..1 58.625961: dwc3_event: event (00000201):
Connection Done [U0]
irq/17-dwc3-2578 [001] d..1 58.625970: dwc3_gadget: Enabling ep0out
irq/17-dwc3-2578 [001] d..1 58.625975: dwc3_gadget_ep_cmd: ep0out: cmd
'Set Endpoint Configuration' [1025] params 80000200 00000500 00000000 -->
status: Successful
irq/17-dwc3-2578 [001] d..1 58.625976: dwc3_gadget: Enabling ep0in
irq/17-dwc3-2578 [001] d..1 58.625980: dwc3_gadget_ep_cmd: ep0in: cmd
'Set Endpoint Configuration' [1025] params 80000200 02000500 00000000 -->
status: Successful
irq/17-dwc3-2578 [001] d..1 58.724491: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.724495: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.724495: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.724496: dwc3_ctrl_req: bRequestType 00
bRequest 05 wValue 0004 wIndex 0000 wLength 0
irq/17-dwc3-2578 [001] d..1 58.724497: dwc3_ep0: USB_REQ_SET_ADDRESS
irq/17-dwc3-2578 [001] d..1 58.724501: dwc3_event: event (000020c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.724502: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.724503: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.724504: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c33 (HLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.724508: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.724622: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.724624: dwc3_ep0: ep0in: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.724625: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.724625: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c32 (hLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.724626: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.724630: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.736479: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.736481: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.736481: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.736482: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0100 wIndex 0000 wLength 18
irq/17-dwc3-2578 [001] d..1 58.736482: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.736484: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 18 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.736487: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 000000008025e800 size 18 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.736498: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.736500: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.736501: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736502: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.736606: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.736608: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736608: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.736609: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 000000008025e800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.736610: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 18/18 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.736611: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.736611: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736612: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.736612: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.736620: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.736750: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.736751: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.736752: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.736752: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.736753: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.736757: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.736851: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.736853: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.736854: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.736854: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0f00 wIndex 0000 wLength 5
irq/17-dwc3-2578 [001] d..1 58.736855: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.736856: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 5 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.736858: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 000000008025f000 size 5 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.736867: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.736870: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.736870: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736871: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.736979: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.736980: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736981: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.736981: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 000000008025f000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.736982: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 5/5 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.736983: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.736983: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.736984: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.736985: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.736992: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737131: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737133: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.737134: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.737134: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737135: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.737142: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737208: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737208: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737209: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.737209: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0f00 wIndex 0000 wLength 22
irq/17-dwc3-2578 [001] d..1 58.737210: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.737211: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 22 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737213: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 000000008025f800 size 22 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737221: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737223: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737224: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737225: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.737299: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737299: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737300: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.737300: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 000000008025f800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737301: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 22/22 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.737301: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737302: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737302: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.737303: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737306: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737411: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737412: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.737412: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.737412: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737413: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.737416: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737501: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737502: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737502: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.737502: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0200 wIndex 0000 wLength 9
irq/17-dwc3-2578 [001] d..1 58.737502: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.737504: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 9 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737505: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080260000 size 9 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737514: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737516: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737516: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737517: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.737589: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737589: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737590: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.737590: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080260000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737590: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 9/9 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.737591: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737591: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737591: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.737592: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737596: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737682: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737683: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.737683: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.737683: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737684: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.737688: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737750: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737751: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737751: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.737751: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0200 wIndex 0000 wLength 309
irq/17-dwc3-2578 [001] d..1 58.737751: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.737752: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 309 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737753: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080260800 size 309 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737763: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737765: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737765: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737766: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.737846: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737846: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737846: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.737846: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080260800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737847: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 309/309 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.737847: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737848: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737848: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.737848: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737852: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737917: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737917: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.737917: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.737918: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.737918: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.737922: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737985: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.737985: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737986: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.737986: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0300 wIndex 0000 wLength 255
irq/17-dwc3-2578 [001] d..1 58.737986: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.737986: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 4 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.737987: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080261000 size 4 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.737991: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.737993: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.737994: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.737994: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.738069: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738069: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738069: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.738070: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080261000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.738070: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 4/4 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.738071: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.738071: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738071: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.738072: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738075: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738180: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738181: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.738181: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.738181: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738181: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.738185: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738248: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738248: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.738249: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.738249: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0302 wIndex 0409 wLength 255
irq/17-dwc3-2578 [001] d..1 58.738249: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.738250: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 28 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.738251: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080261800 size 28 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.738255: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738257: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.738257: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738258: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.738335: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738336: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738336: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.738336: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080261800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.738337: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 28/28 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.738337: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.738338: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738338: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.738338: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738342: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738423: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738423: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.738424: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.738424: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738425: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.738428: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738491: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738491: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.738492: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.738492: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0301 wIndex 0409 wLength 255
irq/17-dwc3-2578 [001] d..1 58.738492: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.738493: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 34 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.738494: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080262000 size 34 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.738498: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738500: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.738500: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738501: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.738561: dwc3_event: event (000090c2):
ep0in: Transfer Not Ready (Active)
irq/17-dwc3-2578 [001] d..1 58.738562: dwc3_ep0: ep0in: Transfer Not
Ready (Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738562: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738563: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738563: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.738563: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080262000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.738564: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 34/34 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.738564: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.738564: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.738565: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.738565: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738569: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.738674: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.738675: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.738675: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.738676: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.738676: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.738680: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739128: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739129: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739130: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.739130: dwc3_ctrl_req: bRequestType 00
bRequest 09 wValue 0001 wIndex 0000 wLength 0
irq/17-dwc3-2578 [001] d..1 58.739131: dwc3_ep0:
USB_REQ_SET_CONFIGURATION
irq/17-dwc3-2578 [001] d..2 58.739141: dwc3_gadget: Enabling ep1in
irq/17-dwc3-2578 [001] d..2 58.739145: dwc3_gadget_ep_cmd: ep1in: cmd
'Set Endpoint Configuration' [1025] params 00020086 06070200 00000000 -->
status: Successful
irq/17-dwc3-2578 [001] d..1 58.739150: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 0 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739159: dwc3_event: event (000020c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.739160: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739160: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.739161: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c33 (HLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.739165: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739241: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739242: dwc3_ep0: ep0in: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.739242: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.739243: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c32 (hLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.739244: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 0/0 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.739245: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.739248: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739313: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739314: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739314: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.739315: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0304 wIndex 0409 wLength 255
irq/17-dwc3-2578 [001] d..1 58.739315: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.739316: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 12 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739318: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080262800 size 12 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.739326: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739329: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.739330: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739330: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.739400: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739401: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739402: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.739402: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080262800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.739403: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 12/12 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.739404: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.739405: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739405: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.739406: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.739412: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739509: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739510: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.739511: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.739512: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.739512: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.739516: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739660: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739661: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739661: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.739662: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0305 wIndex 0409 wLength 255
irq/17-dwc3-2578 [001] d..1 58.739662: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.739664: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 22 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739666: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080263000 size 22 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.739672: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739674: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.739675: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739676: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.739753: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739754: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739754: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.739755: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080263000 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.739756: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 22/22 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.739757: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.739757: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.739758: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.739758: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.739765: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739863: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739864: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.739864: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.739865: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.739866: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.739870: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.739976: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.739981: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739981: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.739984: dwc3_ctrl_req: bRequestType 80
bRequest 06 wValue 0306 wIndex 0409 wLength 255
irq/17-dwc3-2578 [001] d..1 58.739986: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.739987: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 32 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.739989: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000080263800 size 32 ctrl 00000c53 (HLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.740000: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.740002: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.740003: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.740004: dwc3_ep0: Control Data
irq/17-dwc3-2578 [001] d..1 58.740066: dwc3_event: event (000090c2):
ep0in: Transfer Not Ready (Active)
irq/17-dwc3-2578 [001] d..1 58.740067: dwc3_ep0: ep0in: Transfer Not
Ready (Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.740068: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.740069: dwc3_ep0: ep0in: Transfer
Complete: state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.740069: dwc3_ep0: Data Phase
irq/17-dwc3-2578 [001] d..1 58.740070: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000080263800 size 0 ctrl 00000c52 (hLcs:SC:data)
irq/17-dwc3-2578 [001] d..1 58.740071: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 32/32 ZsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.740071: dwc3_event: event (000020c0):
ep0out: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.740072: dwc3_ep0: ep0out: Transfer Not
Ready (Not Active): state 'Data Phase'
irq/17-dwc3-2578 [001] d..1 58.740072: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.740073: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c43 (HLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.740077: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.740177: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.740178: dwc3_ep0: ep0out: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.740179: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.740180: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c42 (hLcs:SC:status3)
irq/17-dwc3-2578 [001] d..1 58.740180: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.740189: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.804470: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.804473: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.804475: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.804475: dwc3_ctrl_req: bRequestType 01
bRequest 0b wValue 0000 wIndex 0001 wLength 0
irq/17-dwc3-2578 [001] d..1 58.804476: dwc3_ep0: Forwarding to gadget
driver
irq/17-dwc3-2578 [001] d..1 58.804482: dwc3_ep0: queueing request
ffff88016c03ad80 to ep0out length 0 state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.804486: dwc3_event: event (000020c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.804487: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.804488: dwc3_ep0: Control Status
irq/17-dwc3-2578 [001] d..1 58.804489: dwc3_prepare_trb: ep0in: 0/0
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c33 (HLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.804495: dwc3_gadget_ep_cmd: ep0in: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.804583: dwc3_event: event (0000c042):
ep0in: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.804584: dwc3_ep0: ep0in: Transfer
Complete: state 'Status Phase'
irq/17-dwc3-2578 [001] d..1 58.804584: dwc3_ep0: Status Phase
irq/17-dwc3-2578 [001] d..1 58.804585: dwc3_complete_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 0 ctrl 00000c32 (hLcs:SC:status2)
irq/17-dwc3-2578 [001] d..1 58.804586: dwc3_gadget_giveback: ep0out: req
ffff88016c03ad80 length 0/0 zsI ==> 0
irq/17-dwc3-2578 [001] d..1 58.804587: dwc3_prepare_trb: ep0out: 0/2
trb ffff880084c02000 buf 0000000084c01000 size 8 ctrl 00000c23 (HLcs:SC:setup)
irq/17-dwc3-2578 [001] d..1 58.804596: dwc3_gadget_ep_cmd: ep0out: cmd
'Start Transfer' [1030] params 00000000 84c02000 00000000 --> status: Successful
irq/17-dwc3-2578 [001] d..1 58.804660: dwc3_event: event (0000c040):
ep0out: Transfer Complete
irq/17-dwc3-2578 [001] d..1 58.804661: dwc3_ep0: ep0out: Transfer
Complete: state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.804661: dwc3_ep0: Setup Phase
irq/17-dwc3-2578 [001] d..1 58.804661: dwc3_ctrl_req: bRequestType a1
bRequest 87 wValue 0100 wIndex 0001 wLength 26
irq/17-dwc3-2578 [001] d..1 58.804663: dwc3_event: event (000010c2):
ep0in: Transfer Not Ready (Not Active)
irq/17-dwc3-2578 [001] d..1 58.804663: dwc3_ep0: ep0in: Transfer Not
Ready (Not Active): state 'Setup Phase'
irq/17-dwc3-2578 [001] d..1 58.804664: dwc3_ep0: Control Data
uvc-gadget keeps printing this error message:
159 if ((ret = ioctl(dev->fd, VIDIOC_DQBUF, &buf)) < 0) {
160 printf("Unable to dequeue buffer: %s (%d).\n",
strerror(errno),
161 errno);
162 return ret;
163 }
Any ideas?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
