Am Freitag, den 07.10.2016, 21:01 +0200 schrieb Marek Vasut:
> On 10/07/2016 06:01 PM, Philipp Zabel wrote:
> > Add support for the CSI internal horizontal and vertical downsizing.
> > 
> > Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
> > ---
> >  drivers/media/platform/imx/imx-ipuv3-csi.c | 20 ++++++++++++++------
> >  1 file changed, 14 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/media/platform/imx/imx-ipuv3-csi.c 
> > b/drivers/media/platform/imx/imx-ipuv3-csi.c
> > index 699460e6..e8a6a7b 100644
> > --- a/drivers/media/platform/imx/imx-ipuv3-csi.c
> > +++ b/drivers/media/platform/imx/imx-ipuv3-csi.c
> > @@ -167,8 +167,16 @@ static int ipucsi_subdev_set_format(struct v4l2_subdev 
> > *sd,
> >             width = clamp_t(unsigned int, sdformat->format.width, 16, 8192);
> >             height = clamp_t(unsigned int, sdformat->format.height, 16, 
> > 4096);
> >     } else {
> > -           width = ipucsi->format_mbus[0].width;
> > -           height = ipucsi->format_mbus[0].height;
> > +           if (sdformat->format.width <
> > +               (ipucsi->format_mbus[0].width * 3 / 4))
> > +                   width = ipucsi->format_mbus[0].width / 2;
> > +           else
> > +                   width = ipucsi->format_mbus[0].width;
> > +           if (sdformat->format.height <
> > +               (ipucsi->format_mbus[0].height * 3 / 4))
> > +                   height = ipucsi->format_mbus[0].height / 2;
> > +           else
> > +                   height = ipucsi->format_mbus[0].height;
> >     }
> >  
> >     mbusformat = __ipucsi_get_pad_format(sd, cfg, sdformat->pad,
> > @@ -212,14 +220,14 @@ static int ipucsi_subdev_s_stream(struct v4l2_subdev 
> > *sd, int enable)
> >             window.width = fmt[0].width;
> >             window.height = fmt[0].height;
> >             ipu_csi_set_window(ipucsi->csi, &window);
> > +           ipu_csi_set_downsize(ipucsi->csi,
> > +                                fmt[0].width == 2 * fmt[1].width,
> > +                                fmt[0].height == 2 * fmt[1].height);
> >  
> >             /* Is CSI data source MCT (MIPI)? */
> >             mux_mct = (mbus_config.type == V4L2_MBUS_CSI2);
> > -
> >             ipu_set_csi_src_mux(ipucsi->ipu, ipucsi->id, mux_mct);
> > -           if (mux_mct)
> > -                   ipu_csi_set_mipi_datatype(ipucsi->csi, /*VC*/ 0,
> > -                                             &fmt[0]);
> > +           ipu_csi_set_mipi_datatype(ipucsi->csi, /*VC*/ 0, &fmt[0]);
> 
> This probably needs fixing , so that the correct VC is passed in ?

Absolutely, right now I don't know how though.
We are still missing API to set the MIPI CSI-2 virtual channel.

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to