Am Montag, den 17.10.2016, 12:18 +0200 schrieb Gary Bisson:
> For the whole series:
> Tested-by: Gary Bisson <gary.bis...@boundarydevices.com>
> Tested on Nitrogen6x + BD_HDMI_MIPI daughter board on linux-next
> This required using your v4l2-ctl patch to set the EDID if the source
> output can't be forced:
> BTW, do you have any update on this? Because it looks like the
> VIDIOC_SUBDEV_QUERYCAP hasn't been implemented since your patch (March
> Then I followed the procedure you gave here:
> For those interested in trying it out, note that kmssink requires to use
> Gstreamer 1.9.x.
> I have a few remarks:
> - I believe it would help having a patch that sets imx_v6_v7_defconfig
> with the proper options in this series
I can add that in the next round.
> - Not related to this series, I couldn't boot the board unless I disable
> the PCIe driver, have you experienced the same issue?
I had not enabled the PCIe driver, but a quick boot test with
CONFIG_PCIE_DW enabled hangs after these messages:
[ 1.314298] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
[ 1.317199] OF: PCI: No bus range found for /soc/pcie@0x01000000, using
[ 1.325171] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
[ 1.331029] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
I've asked Lucas to have a look.
> - Is there a way not to set all the links manually using media-ctl? I
> expected all the formats to be negotiated automatically once a stream
> is properly detected.
This should be done in userspace, probably libv4l2.
> - As discussed last week, the Nitrogen6x dtsi file shouldn't be
> included, instead an overlay would be more appropriate. Maybe the log
> should contain a comment about this.
> Let me know if I need to add that Tested-by to every single patch so it
> appears on Patchwork.
It's fine as is, thank you.
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html