Hi Ulrich,
Thank you for the patch.
On Tuesday 18 Oct 2016 17:02:22 Ulrich Hecht wrote:
> Identical to the setup on Lager.
You probably mean on Koelsch ?
> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> ---
> arch/arm/boot/dts/r8a7793-gose.dts | 64 +++++++++++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts
> b/arch/arm/boot/dts/r8a7793-gose.dts index dc311eb..a47ea4b 100644
> --- a/arch/arm/boot/dts/r8a7793-gose.dts
> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
> @@ -253,6 +253,17 @@
> };
> };
>
> + hdmi-in {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&adv7612_in>;
> + };
> + };
> + };
> +
> hdmi-out {
> compatible = "hdmi-connector";
> type = "a";
For consistency you might want to rename the hdmi-out endpoint like you did
for Lager and Koelsch.
With that fixed,
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> @@ -374,6 +385,11 @@
> groups = "audio_clk_a";
> function = "audio_clk";
> };
> +
> + vin0_pins: vin0 {
> + groups = "vin0_data24", "vin0_sync", "vin0_clkenb",
"vin0_clk";
> + function = "vin0";
> + };
> };
>
> ðer {
> @@ -531,6 +547,33 @@
> };
> };
>
> + hdmi-in@4c {
> + compatible = "adi,adv7612";
> + reg = <0x4c>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + default-input = <0>;
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + adv7612_in: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + adv7612_out: endpoint {
> + remote-endpoint = <&vin0ep2>;
> + };
> + };
> + };
> + };
> +
> eeprom@50 {
> compatible = "renesas,r1ex24002", "atmel,24c02";
> reg = <0x50>;
> @@ -558,3 +601,24 @@
> &ssi1 {
> shared-pin;
> };
> +
> +/* HDMI video input */
> +&vin0 {
> + status = "okay";
> + pinctrl-0 = <&vin0_pins>;
> + pinctrl-names = "default";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vin0ep2: endpoint {
> + remote-endpoint = <&adv7612_out>;
> + bus-width = <24>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + pclk-sample = <1>;
> + data-active = <1>;
> + };
> + };
> +};
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
