The bits are sent in lsb first. Hardware decoders also send nec32
in this order (e.g. dib0700). This should be consistent, however
I have no way of knowing which order the LME2510 and Tivo keymaps
are (the only two kernel keymaps with NEC32).
Signed-off-by: Sean Young <s...@mess.org>
---
drivers/media/rc/ir-nec-decoder.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/ir-nec-decoder.c
b/drivers/media/rc/ir-nec-decoder.c
index 2a9d155..ba02d05 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -170,7 +170,10 @@ static int ir_nec_decode(struct rc_dev *dev, struct
ir_raw_event ev)
if (send_32bits) {
/* NEC transport, but modified protocol, used by at
* least Apple and TiVo remotes */
- scancode = data->bits;
+ scancode = address << 24 |
+ not_address << 16 |
+ command << 8 |
+ not_command;
IR_dprintk(1, "NEC (modified) scancode 0x%08x\n",
scancode);
rc_type = RC_TYPE_NEC32;
} else if ((address ^ not_address) != 0xff) {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
