Devin Heitmueller wrote:
On Fri, Oct 9, 2009 at 1:22 PM, Ali Abdallah <al...@xfce.org> wrote:
Screenshots here for TV and S-Video input configuration with TV time.
http://ali.blogsite.org/files/tvtime/
Could you try the S-Video or composite input and see if the picture
quality is still bad (as this well help isolate whether it's a problem
with the tuner chip or the decoder.
Same picture quality with S-Video, but with composite there is no picture.
Ok, this helps alot. This rules out the tuner and suggests that
perhaps the video decoder is not being programmed properly.
Could you please send me the output of "dmesg"?
usb 1-1: new high speed USB device using ehci_hcd and address 15
usb 1-1: configuration #1 chosen from 1 choice
em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0,
class 0)
em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: USB Remote wakeup capable
em28xx #0: 500mA max power
em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
em28xx #0: Your board has no unique USB ID.
em28xx #0: A hint were successfully done, based on eeprom hash.
em28xx #0: This method is not 100% failproof.
em28xx #0: If the board were missdetected, please email this log to:
em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
em28xx #0: Board detected as Pinnacle Hybrid Pro
tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-1: firmware: requesting xc3028-v27.fw
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type:
xc2028 firmware, ver 2.7
xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000),
id 0000000000008000.
em28xx #0: Config register raw data: 0x58
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as /dev/video0
em28xx #0: V4L2 VBI device registered as /dev/vbi0
xc2028 1-0061: attaching existing instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
em28xx #0/2: xc3028 attached
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
Successfully loaded em28xx-dvb
tvp5150 1-005c: tvp5150am1 detected.
tvp5150 1-005c: tvp5150am1 detected.
tvp5150 1-005c: tvp5150am1 detected.
xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
(0), id 0000000000ff0000:
xc2028 1-0061: Loading firmware for type=(0), id 0000000000200000.
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000),
id 0000000000200000.
tvp5150 1-005c: tvp5150am1 detected.
xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
(0), id 0000000000ff0000:
xc2028 1-0061: Loading firmware for type=(0), id 0000000000200000.
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000),
id 0000000000200000.
I'll see about
setting up a tree with some additional debugging for you to try out.
Okay i'm ready to try it out.
Thanks,
Devin
Cheers,
Ali.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
