Signed-off-by: Sean Young <s...@mess.org>
---
MAINTAINERS | 6 +
drivers/media/rc/Kconfig | 17 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/serial_ir.c | 845 +++++++++++++++++++++++++++++++
drivers/staging/media/lirc/Kconfig | 13 -
drivers/staging/media/lirc/Makefile | 1 -
drivers/staging/media/lirc/lirc_serial.c | 845 -------------------------------
7 files changed, 869 insertions(+), 859 deletions(-)
create mode 100644 drivers/media/rc/serial_ir.c
delete mode 100644 drivers/staging/media/lirc/lirc_serial.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7db3f7a..5c48f49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10629,6 +10629,12 @@ S: Maintained
F: Documentation/devicetree/bindings/serial/
F: drivers/tty/serial/
+SERIAL IR RECEIVER
+M: Sean Young <s...@mess.org>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/rc/serial_ir.c
+
STI CEC DRIVER
M: Benjamin Gaignard <benjamin.gaign...@linaro.org>
L: ker...@stlinux.com
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 370e16e..629e8ca 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -389,4 +389,21 @@ config IR_SUNXI
To compile this driver as a module, choose M here: the module will
be called sunxi-ir.
+config IR_SERIAL
+ tristate "Homebrew Serial Port Receiver"
+ depends on RC_CORE
+ ---help---
+ Say Y if you want to use Homebrew Serial Port Receivers and
+ Transceivers.
+
+ To compile this driver as a module, choose M here: the module will
+ be called serial-ir.
+
+config IR_SERIAL_TRANSMITTER
+ bool "Serial Port Transmitter"
+ default y
+ depends on IR_SERIAL
+ ---help---
+ Serial Port Transmitter support
+
endif #RC_DEVICES
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 379a5c0..3a984ee 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
obj-$(CONFIG_RC_ST) += st_rc.o
obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o
obj-$(CONFIG_IR_IMG) += img-ir/
+obj-$(CONFIG_IR_SERIAL) += serial_ir.o
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
new file mode 100644
index 0000000..aad9bec
--- /dev/null
+++ b/drivers/media/rc/serial_ir.c
@@ -0,0 +1,845 @@
+/*
+ * serial_ir.c
+ *
+ * serial_ir - Device driver that records pulse- and pause-lengths
+ * (space-lengths) between DDCD event on a serial port.
+ *
+ * Copyright (C) 1996,97 Ralph Metzler <r...@thp.uni-koeln.de>
+ * Copyright (C) 1998 Trent Piepho <xy...@u.washington.edu>
+ * Copyright (C) 1998 Ben Pfaff <b...@gnu.org>
+ * Copyright (C) 1999 Christoph Bartelmus <l...@bartelmus.de>
+ * Copyright (C) 2007 Andrei Tanas <and...@tanas.ca> (suspend/resume support)
+ * Copyright (C) 2016 Sean Young <s...@mess.org> (port to rc-core)
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+
+struct serial_ir_hw {
+ int signal_pin;
+ int signal_pin_change;
+ u8 on;
+ u8 off;
+ unsigned set_send_carrier:1;
+ unsigned set_duty_cycle:1;
+ void (*send_pulse)(unsigned int length, ktime_t edge);
+ void (*send_space)(void);
+ spinlock_t lock;
+};
+
+#define IR_HOMEBREW 0
+#define IR_IRDEO 1
+#define IR_IRDEO_REMOTE 2
+#define IR_ANIMAX 3
+#define IR_IGOR 4
+
+/* module parameters */
+static int type;
+static int io;
+static int irq;
+static bool iommap;
+static int ioshift;
+static bool softcarrier = true;
+static bool share_irq;
+static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */
+static bool txsense; /* 0 = active high, 1 = active low */
+
+/* forward declarations */
+static void send_pulse_irdeo(unsigned int length, ktime_t edge);
+static void send_space_irdeo(void);
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+static void send_pulse_homebrew(unsigned int length, ktime_t edge);
+static void send_space_homebrew(void);
+#endif
+
+static struct serial_ir_hw hardware[] = {
+ [IR_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_HOMEBREW].lock),
+ .signal_pin = UART_MSR_DCD,
+ .signal_pin_change = UART_MSR_DDCD,
+ .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+ .off = (UART_MCR_RTS | UART_MCR_OUT2),
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+ .send_pulse = send_pulse_homebrew,
+ .send_space = send_space_homebrew,
+ .set_send_carrier = true,
+ .set_duty_cycle = true,
+#endif
+ },
+
+ [IR_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO].lock),
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = UART_MCR_OUT2,
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .send_pulse = send_pulse_irdeo,
+ .send_space = send_space_irdeo,
+ .set_duty_cycle = true,
+ },
+
+ [IR_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO_REMOTE].lock),
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ .send_pulse = send_pulse_irdeo,
+ .send_space = send_space_irdeo,
+ .set_duty_cycle = true,
+ },
+
+ [IR_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_ANIMAX].lock),
+ .signal_pin = UART_MSR_DCD,
+ .signal_pin_change = UART_MSR_DDCD,
+ .on = 0,
+ .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+ },
+
+ [IR_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IGOR].lock),
+ .signal_pin = UART_MSR_DSR,
+ .signal_pin_change = UART_MSR_DDSR,
+ .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+ .off = (UART_MCR_RTS | UART_MCR_OUT2),
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+ .send_pulse = send_pulse_homebrew,
+ .send_space = send_space_homebrew,
+ .set_send_carrier = true,
+ .set_duty_cycle = true,
+#endif
+ },
+};
+
+#define RS_ISR_PASS_LIMIT 256
+
+struct serial_ir {
+ ktime_t lastkt;
+ struct rc_dev *rcdev;
+ struct platform_device *pdev;
+
+ unsigned int freq;
+ unsigned int duty_cycle;
+
+ unsigned int pulse_width, space_width;
+};
+
+static struct serial_ir serial_ir;
+
+/* fetch serial input packet (1 byte) from register offset */
+static u8 sinp(int offset)
+{
+ if (iommap)
+ /* the register is memory-mapped */
+ offset <<= ioshift;
+
+ return inb(io + offset);
+}
+
+/* write serial output packet (1 byte) of value to register offset */
+static void soutp(int offset, u8 value)
+{
+ if (iommap)
+ /* the register is memory-mapped */
+ offset <<= ioshift;
+
+ outb(value, io + offset);
+}
+
+static void on(void)
+{
+ if (txsense)
+ soutp(UART_MCR, hardware[type].off);
+ else
+ soutp(UART_MCR, hardware[type].on);
+}
+
+static void off(void)
+{
+ if (txsense)
+ soutp(UART_MCR, hardware[type].on);
+ else
+ soutp(UART_MCR, hardware[type].off);
+}
+
+static void init_timing_params(unsigned int new_duty_cycle,
+ unsigned int new_freq)
+{
+ serial_ir.duty_cycle = new_duty_cycle;
+ serial_ir.freq = new_freq;
+
+ serial_ir.pulse_width = DIV_ROUND_CLOSEST(
+ new_duty_cycle * NSEC_PER_SEC, new_freq * 100l);
+ serial_ir.space_width = DIV_ROUND_CLOSEST(
+ (100l - new_duty_cycle) * NSEC_PER_SEC, new_freq * 100l);
+}
+
+static void send_pulse_irdeo(unsigned int length, ktime_t target)
+{
+ long rawbits;
+ int i;
+ unsigned char output;
+ unsigned char chunk, shifted;
+
+ /* how many bits have to be sent ? */
+ rawbits = length * 1152 / 10000;
+ if (serial_ir.duty_cycle > 50)
+ chunk = 3;
+ else
+ chunk = 1;
+ for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) {
+ shifted = chunk << (i * 3);
+ shifted >>= 1;
+ output &= (~shifted);
+ i++;
+ if (i == 3) {
+ soutp(UART_TX, output);
+ while (!(sinp(UART_LSR) & UART_LSR_THRE))
+ ;
+ output = 0x7f;
+ i = 0;
+ }
+ }
+ if (i != 0) {
+ soutp(UART_TX, output);
+ while (!(sinp(UART_LSR) & UART_LSR_TEMT))
+ ;
+ }
+}
+
+static void send_space_irdeo(void)
+{
+}
+
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+static void send_pulse_homebrew_softcarrier(unsigned int length, ktime_t edge)
+{
+ ktime_t now, target = ktime_add_us(edge, length);
+ /*
+ * delta should never exceed 4 seconds and on m68k
+ * ndelay(s64) does not compile; so use s32 rather than s64.
+ */
+ s32 delta;
+
+ for (;;) {
+ now = ktime_get();
+ if (ktime_compare(now, target) >= 0)
+ break;
+ on();
+ edge = ktime_add_ns(edge, serial_ir.pulse_width);
+ delta = ktime_to_ns(ktime_sub(edge, now));
+ if (delta > 0)
+ ndelay(delta);
+ now = ktime_get();
+ off();
+ if (ktime_compare(now, target) >= 0)
+ break;
+ edge = ktime_add_ns(edge, serial_ir.space_width);
+ delta = ktime_to_ns(ktime_sub(edge, now));
+ if (delta > 0)
+ ndelay(delta);
+ }
+}
+
+static void send_pulse_homebrew(unsigned int length, ktime_t edge)
+{
+ if (softcarrier)
+ send_pulse_homebrew_softcarrier(length, edge);
+ else
+ on();
+}
+
+static void send_space_homebrew(void)
+{
+ off();
+}
+#endif
+
+static void frbwrite(unsigned int l, bool is_pulse)
+{
+ /* simple noise filter */
+ static unsigned int ptr, pulse, space;
+ DEFINE_IR_RAW_EVENT(ev);
+
+ if (ptr > 0 && is_pulse) {
+ pulse += l;
+ if (pulse > 250000) {
+ ev.duration = space;
+ ev.pulse = false;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+ ev.duration = pulse;
+ ev.pulse = true;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+ ptr = 0;
+ pulse = 0;
+ }
+ return;
+ }
+ if (!is_pulse) {
+ if (ptr == 0) {
+ if (l > 20000000) {
+ space = l;
+ ptr++;
+ return;
+ }
+ } else {
+ if (l > 20000000) {
+ space += pulse;
+ if (space > IR_MAX_DURATION)
+ space = IR_MAX_DURATION;
+ space += l;
+ if (space > IR_MAX_DURATION)
+ space = IR_MAX_DURATION;
+ pulse = 0;
+ return;
+ }
+
+ ev.duration = space;
+ ev.pulse = false;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+ ev.duration = pulse;
+ ev.pulse = true;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+ ptr = 0;
+ pulse = 0;
+ }
+ }
+
+ ev.duration = l;
+ ev.pulse = is_pulse;
+ ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+}
+
+static irqreturn_t serial_ir_irq_handler(int i, void *blah)
+{
+ ktime_t kt;
+ int counter, dcd;
+ u8 status;
+ ktime_t delkt;
+ unsigned int data;
+ static int last_dcd = -1;
+
+ if ((sinp(UART_IIR) & UART_IIR_NO_INT)) {
+ /* not our interrupt */
+ return IRQ_NONE;
+ }
+
+ counter = 0;
+ do {
+ counter++;
+ status = sinp(UART_MSR);
+ if (counter > RS_ISR_PASS_LIMIT) {
+ dev_err(&serial_ir.pdev->dev, "Trapped in interrupt");
+ break;
+ }
+ if ((status & hardware[type].signal_pin_change)
+ && sense != -1) {
+ /* get current time */
+ kt = ktime_get();
+
+ /*
+ * The driver needs to know if your receiver is
+ * active high or active low, or the space/pulse
+ * sense could be inverted.
+ */
+
+ /* calc time since last interrupt in nanoseconds */
+ dcd = (status & hardware[type].signal_pin) ? 1 : 0;
+
+ if (dcd == last_dcd) {
+ dev_err(&serial_ir.pdev->dev,
+ "ignoring spike: %d %d %lldns %lldns\n",
+ dcd, sense, ktime_to_ns(kt),
+ ktime_to_ns(serial_ir.lastkt));
+ continue;
+ }
+
+ delkt = ktime_sub(kt, serial_ir.lastkt);
+ if (ktime_compare(delkt, ktime_set(15, 0)) > 0) {
+ data = IR_MAX_DURATION; /* really long time */
+ if (!(dcd^sense)) {
+ /* sanity check */
+ dev_err(&serial_ir.pdev->dev,
+ "dcd unexpected: %d %d %lldns
%lldns\n",
+ dcd, sense, ktime_to_ns(kt),
+ ktime_to_ns(serial_ir.lastkt));
+ /*
+ * detecting pulse while this
+ * MUST be a space!
+ */
+ sense = sense ? 0 : 1;
+ }
+ } else
+ data = ktime_to_ns(delkt);
+ frbwrite(data, !(dcd ^ sense));
+ serial_ir.lastkt = kt;
+ last_dcd = dcd;
+ ir_raw_event_handle(serial_ir.rcdev);
+ }
+ } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
+ return IRQ_HANDLED;
+}
+
+
+static int hardware_init_port(void)
+{
+ u8 scratch, scratch2, scratch3;
+
+ /*
+ * This is a simple port existence test, borrowed from the autoconfig
+ * function in drivers/serial/8250.c
+ */
+ scratch = sinp(UART_IER);
+ soutp(UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ scratch2 = sinp(UART_IER) & 0x0f;
+ soutp(UART_IER, 0x0f);
+#ifdef __i386__
+ outb(0x00, 0x080);
+#endif
+ scratch3 = sinp(UART_IER) & 0x0f;
+ soutp(UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0f) {
+ /* we fail, there's nothing here */
+ pr_err("port existence test failed, cannot continue\n");
+ return -ENODEV;
+ }
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* First of all, disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+ /* Clear registers. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+ /* Set line for power source */
+ off();
+
+ /* Clear registers again to be sure. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+ switch (type) {
+ case IR_IRDEO:
+ case IR_IRDEO_REMOTE:
+ /* setup port to 7N1 @ 115200 Baud */
+ /* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */
+
+ /* Set DLAB 1. */
+ soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+ /* Set divisor to 1 => 115200 Baud */
+ soutp(UART_DLM, 0);
+ soutp(UART_DLL, 1);
+ /* Set DLAB 0 + 7N1 */
+ soutp(UART_LCR, UART_LCR_WLEN7);
+ /* THR interrupt already disabled at this point */
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int serial_ir_probe(struct platform_device *dev)
+{
+ int i, nlow, nhigh, result;
+
+ result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+ share_irq ? IRQF_SHARED : 0,
+ KBUILD_MODNAME, &hardware);
+ if (result < 0) {
+ if (result == -EBUSY)
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
+ else if (result == -EINVAL)
+ dev_err(&dev->dev, "Bad irq number or handler\n");
+ return result;
+ }
+
+ /* Reserve io region. */
+ if (((iommap)
+ && (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+ KBUILD_MODNAME) == NULL))
+ || ((!iommap)
+ && (devm_request_region(&dev->dev, io, 8,
+ KBUILD_MODNAME) == NULL))) {
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(50, 38000);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = nlow >= nhigh ? 1 : 0;
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
+ } else
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
+
+ dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+ return 0;
+}
+
+static int serial_ir_open(struct rc_dev *rcdev)
+{
+ unsigned long flags;
+
+ /* initialize timestamp */
+ serial_ir.lastkt = ktime_get();
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+ return 0;
+}
+
+static void serial_ir_close(struct rc_dev *rcdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* First of all, disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+}
+
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+ unsigned int count)
+{
+ unsigned long flags;
+ ktime_t edge;
+ s64 delta;
+ int i;
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+ if (type == IR_IRDEO) {
+ /* DTR, RTS down */
+ on();
+ }
+
+ edge = ktime_get();
+ for (i = 0; i < count; i++) {
+ if (i%2)
+ hardware[type].send_space();
+ else
+ hardware[type].send_pulse(txbuf[i], edge);
+
+ edge = ktime_add_us(edge, txbuf[i]);
+ delta = ktime_us_delta(edge, ktime_get());
+ if (delta > 25) {
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+ usleep_range(delta - 25, delta + 25);
+ spin_lock_irqsave(&hardware[type].lock, flags);
+ }
+ else if (delta > 0)
+ udelay(delta);
+ }
+ off();
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+ return count;
+}
+
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle)
+{
+ init_timing_params(cycle, serial_ir.freq);
+ return 0;
+}
+
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier)
+{
+ if (carrier > 500000 || carrier < 20000)
+ return -EINVAL;
+
+ init_timing_params(serial_ir.duty_cycle, carrier);
+ return 0;
+}
+
+static int serial_ir_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ /* Set DLAB 0. */
+ soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+ /* Disable all interrupts */
+ soutp(UART_IER, sinp(UART_IER) &
+ (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+ /* Clear registers. */
+ sinp(UART_LSR);
+ sinp(UART_RX);
+ sinp(UART_IIR);
+ sinp(UART_MSR);
+
+ return 0;
+}
+
+static int serial_ir_resume(struct platform_device *dev)
+{
+ unsigned long flags;
+ int result;
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ spin_lock_irqsave(&hardware[type].lock, flags);
+ /* Enable Interrupt */
+ serial_ir.lastkt = ktime_get();
+ soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+ off();
+
+ spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+ return 0;
+}
+
+static struct platform_driver serial_ir_driver = {
+ .probe = serial_ir_probe,
+ .suspend = serial_ir_suspend,
+ .resume = serial_ir_resume,
+ .driver = {
+ .name = "serial_ir",
+ },
+};
+
+static int __init serial_ir_init(void)
+{
+ int result;
+
+ result = platform_driver_register(&serial_ir_driver);
+ if (result)
+ return result;
+
+ serial_ir.pdev = platform_device_alloc("serial_ir", 0);
+ if (!serial_ir.pdev) {
+ result = -ENOMEM;
+ goto exit_driver_unregister;
+ }
+
+ result = platform_device_add(serial_ir.pdev);
+ if (result)
+ goto exit_device_put;
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(serial_ir.pdev);
+exit_driver_unregister:
+ platform_driver_unregister(&serial_ir_driver);
+ return result;
+}
+
+static void serial_ir_exit(void)
+{
+ platform_device_unregister(serial_ir.pdev);
+ platform_driver_unregister(&serial_ir_driver);
+}
+
+static int __init serial_ir_init_module(void)
+{
+ struct rc_dev *rcdev;
+ int result;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ case IR_IRDEO:
+ case IR_IRDEO_REMOTE:
+ case IR_ANIMAX:
+ case IR_IGOR:
+ /* if nothing specified, use ttyS0/com1 and irq 4 */
+ io = io ? io : 0x3f8;
+ irq = irq ? irq : 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (!softcarrier) {
+ switch (type) {
+ case IR_HOMEBREW:
+ case IR_IGOR:
+ hardware[type].set_send_carrier = false;
+ hardware[type].set_duty_cycle = false;
+ break;
+ }
+ }
+
+ /* make sure sense is either -1, 0, or 1 */
+ if (sense != -1)
+ sense = !!sense;
+
+ result = serial_ir_init();
+ if (result)
+ return result;
+
+ rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev);
+ if (!rcdev) {
+ result = -ENOMEM;
+ goto serial_cleanup;
+ }
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->driver_type = RC_DRIVER_IR_RAW;
+ rcdev->allowed_protocols = RC_BIT_ALL;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ result = rc_register_device(rcdev);
+
+ if (!result)
+ return 0;
+serial_cleanup:
+ serial_ir_exit();
+ return result;
+}
+
+static void __exit serial_ir_exit_module(void)
+{
+ rc_unregister_device(serial_ir.rcdev);
+ serial_ir_exit();
+}
+
+module_init(serial_ir_init_module);
+module_exit(serial_ir_exit_module);
+
+MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
+MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus,
Andrei Tanas");
+MODULE_LICENSE("GPL");
+
+module_param(type, int, 0444);
+MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo
Remote, 3 = AnimaX, 4 = IgorPlug");
+
+module_param(io, int, 0444);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+/* some architectures (e.g. intel xscale) have memory mapped registers */
+module_param(iommap, bool, 0444);
+MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory
mapped io)");
+
+/*
+ * some architectures (e.g. intel xscale) align the 8bit serial registers
+ * on 32bit word boundaries.
+ * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out()
+ */
+module_param(ioshift, int, 0444);
+MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
+
+module_param(irq, int, 0444);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(share_irq, bool, 0444);
+MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
+
+module_param(sense, int, 0444);
+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit (0 =
active high, 1 = active low )");
+
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+module_param(txsense, bool, 0444);
+MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 =
active low )");
+#endif
+
+module_param(softcarrier, bool, 0444);
+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default
on)");
diff --git a/drivers/staging/media/lirc/Kconfig
b/drivers/staging/media/lirc/Kconfig
index 6879c46..25b7e7c 100644
--- a/drivers/staging/media/lirc/Kconfig
+++ b/drivers/staging/media/lirc/Kconfig
@@ -38,19 +38,6 @@ config LIRC_SASEM
help
Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
-config LIRC_SERIAL
- tristate "Homebrew Serial Port Receiver"
- depends on LIRC
- help
- Driver for Homebrew Serial Port Receivers
-
-config LIRC_SERIAL_TRANSMITTER
- bool "Serial Port Transmitter"
- default y
- depends on LIRC_SERIAL
- help
- Serial Port Transmitter support
-
config LIRC_SIR
tristate "Built-in SIR IrDA port"
depends on LIRC
diff --git a/drivers/staging/media/lirc/Makefile
b/drivers/staging/media/lirc/Makefile
index 5430adf..7f919ea 100644
--- a/drivers/staging/media/lirc/Makefile
+++ b/drivers/staging/media/lirc/Makefile
@@ -7,6 +7,5 @@ obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
-obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
diff --git a/drivers/staging/media/lirc/lirc_serial.c
b/drivers/staging/media/lirc/lirc_serial.c
deleted file mode 100644
index 7d1c2af..0000000
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- * lirc_serial.c
- *
- * lirc_serial - Device driver that records pulse- and pause-lengths
- * (space-lengths) between DDCD event on a serial port.
- *
- * Copyright (C) 1996,97 Ralph Metzler <r...@thp.uni-koeln.de>
- * Copyright (C) 1998 Trent Piepho <xy...@u.washington.edu>
- * Copyright (C) 1998 Ben Pfaff <b...@gnu.org>
- * Copyright (C) 1999 Christoph Bartelmus <l...@bartelmus.de>
- * Copyright (C) 2007 Andrei Tanas <and...@tanas.ca> (suspend/resume support)
- * Copyright (C) 2016 Sean Young <s...@mess.org> (port to rc-core)
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <media/rc-core.h>
-
-struct serial_ir_hw {
- int signal_pin;
- int signal_pin_change;
- u8 on;
- u8 off;
- unsigned set_send_carrier:1;
- unsigned set_duty_cycle:1;
- void (*send_pulse)(unsigned int length, ktime_t edge);
- void (*send_space)(void);
- spinlock_t lock;
-};
-
-#define IR_HOMEBREW 0
-#define IR_IRDEO 1
-#define IR_IRDEO_REMOTE 2
-#define IR_ANIMAX 3
-#define IR_IGOR 4
-
-/* module parameters */
-static int type;
-static int io;
-static int irq;
-static bool iommap;
-static int ioshift;
-static bool softcarrier = true;
-static bool share_irq;
-static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */
-static bool txsense; /* 0 = active high, 1 = active low */
-
-/* forward declarations */
-static void send_pulse_irdeo(unsigned int length, ktime_t edge);
-static void send_space_irdeo(void);
-#ifdef CONFIG_IR_SERIAL_TRANSMITTER
-static void send_pulse_homebrew(unsigned int length, ktime_t edge);
-static void send_space_homebrew(void);
-#endif
-
-static struct serial_ir_hw hardware[] = {
- [IR_HOMEBREW] = {
- .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_HOMEBREW].lock),
- .signal_pin = UART_MSR_DCD,
- .signal_pin_change = UART_MSR_DDCD,
- .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
- .off = (UART_MCR_RTS | UART_MCR_OUT2),
-#ifdef CONFIG_IR_SERIAL_TRANSMITTER
- .send_pulse = send_pulse_homebrew,
- .send_space = send_space_homebrew,
- .set_send_carrier = true,
- .set_duty_cycle = true,
-#endif
- },
-
- [IR_IRDEO] = {
- .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO].lock),
- .signal_pin = UART_MSR_DSR,
- .signal_pin_change = UART_MSR_DDSR,
- .on = UART_MCR_OUT2,
- .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
- .send_pulse = send_pulse_irdeo,
- .send_space = send_space_irdeo,
- .set_duty_cycle = true,
- },
-
- [IR_IRDEO_REMOTE] = {
- .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO_REMOTE].lock),
- .signal_pin = UART_MSR_DSR,
- .signal_pin_change = UART_MSR_DDSR,
- .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
- .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
- .send_pulse = send_pulse_irdeo,
- .send_space = send_space_irdeo,
- .set_duty_cycle = true,
- },
-
- [IR_ANIMAX] = {
- .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_ANIMAX].lock),
- .signal_pin = UART_MSR_DCD,
- .signal_pin_change = UART_MSR_DDCD,
- .on = 0,
- .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
- },
-
- [IR_IGOR] = {
- .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IGOR].lock),
- .signal_pin = UART_MSR_DSR,
- .signal_pin_change = UART_MSR_DDSR,
- .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
- .off = (UART_MCR_RTS | UART_MCR_OUT2),
-#ifdef CONFIG_IR_SERIAL_TRANSMITTER
- .send_pulse = send_pulse_homebrew,
- .send_space = send_space_homebrew,
- .set_send_carrier = true,
- .set_duty_cycle = true,
-#endif
- },
-};
-
-#define RS_ISR_PASS_LIMIT 256
-
-struct serial_ir {
- ktime_t lastkt;
- struct rc_dev *rcdev;
- struct platform_device *pdev;
-
- unsigned int freq;
- unsigned int duty_cycle;
-
- unsigned int pulse_width, space_width;
-};
-
-static struct serial_ir serial_ir;
-
-/* fetch serial input packet (1 byte) from register offset */
-static u8 sinp(int offset)
-{
- if (iommap)
- /* the register is memory-mapped */
- offset <<= ioshift;
-
- return inb(io + offset);
-}
-
-/* write serial output packet (1 byte) of value to register offset */
-static void soutp(int offset, u8 value)
-{
- if (iommap)
- /* the register is memory-mapped */
- offset <<= ioshift;
-
- outb(value, io + offset);
-}
-
-static void on(void)
-{
- if (txsense)
- soutp(UART_MCR, hardware[type].off);
- else
- soutp(UART_MCR, hardware[type].on);
-}
-
-static void off(void)
-{
- if (txsense)
- soutp(UART_MCR, hardware[type].on);
- else
- soutp(UART_MCR, hardware[type].off);
-}
-
-static void init_timing_params(unsigned int new_duty_cycle,
- unsigned int new_freq)
-{
- serial_ir.duty_cycle = new_duty_cycle;
- serial_ir.freq = new_freq;
-
- serial_ir.pulse_width = DIV_ROUND_CLOSEST(
- new_duty_cycle * NSEC_PER_SEC, new_freq * 100l);
- serial_ir.space_width = DIV_ROUND_CLOSEST(
- (100l - new_duty_cycle) * NSEC_PER_SEC, new_freq * 100l);
-}
-
-static void send_pulse_irdeo(unsigned int length, ktime_t target)
-{
- long rawbits;
- int i;
- unsigned char output;
- unsigned char chunk, shifted;
-
- /* how many bits have to be sent ? */
- rawbits = length * 1152 / 10000;
- if (serial_ir.duty_cycle > 50)
- chunk = 3;
- else
- chunk = 1;
- for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) {
- shifted = chunk << (i * 3);
- shifted >>= 1;
- output &= (~shifted);
- i++;
- if (i == 3) {
- soutp(UART_TX, output);
- while (!(sinp(UART_LSR) & UART_LSR_THRE))
- ;
- output = 0x7f;
- i = 0;
- }
- }
- if (i != 0) {
- soutp(UART_TX, output);
- while (!(sinp(UART_LSR) & UART_LSR_TEMT))
- ;
- }
-}
-
-static void send_space_irdeo(void)
-{
-}
-
-#ifdef CONFIG_IR_SERIAL_TRANSMITTER
-static void send_pulse_homebrew_softcarrier(unsigned int length, ktime_t edge)
-{
- ktime_t now, target = ktime_add_us(edge, length);
- /*
- * delta should never exceed 4 seconds and on m68k
- * ndelay(s64) does not compile; so use s32 rather than s64.
- */
- s32 delta;
-
- for (;;) {
- now = ktime_get();
- if (ktime_compare(now, target) >= 0)
- break;
- on();
- edge = ktime_add_ns(edge, serial_ir.pulse_width);
- delta = ktime_to_ns(ktime_sub(edge, now));
- if (delta > 0)
- ndelay(delta);
- now = ktime_get();
- off();
- if (ktime_compare(now, target) >= 0)
- break;
- edge = ktime_add_ns(edge, serial_ir.space_width);
- delta = ktime_to_ns(ktime_sub(edge, now));
- if (delta > 0)
- ndelay(delta);
- }
-}
-
-static void send_pulse_homebrew(unsigned int length, ktime_t edge)
-{
- if (softcarrier)
- send_pulse_homebrew_softcarrier(length, edge);
- else
- on();
-}
-
-static void send_space_homebrew(void)
-{
- off();
-}
-#endif
-
-static void frbwrite(unsigned int l, bool is_pulse)
-{
- /* simple noise filter */
- static unsigned int ptr, pulse, space;
- DEFINE_IR_RAW_EVENT(ev);
-
- if (ptr > 0 && is_pulse) {
- pulse += l;
- if (pulse > 250000) {
- ev.duration = space;
- ev.pulse = false;
- ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
- ev.duration = pulse;
- ev.pulse = true;
- ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
- ptr = 0;
- pulse = 0;
- }
- return;
- }
- if (!is_pulse) {
- if (ptr == 0) {
- if (l > 20000000) {
- space = l;
- ptr++;
- return;
- }
- } else {
- if (l > 20000000) {
- space += pulse;
- if (space > IR_MAX_DURATION)
- space = IR_MAX_DURATION;
- space += l;
- if (space > IR_MAX_DURATION)
- space = IR_MAX_DURATION;
- pulse = 0;
- return;
- }
-
- ev.duration = space;
- ev.pulse = false;
- ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
- ev.duration = pulse;
- ev.pulse = true;
- ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
- ptr = 0;
- pulse = 0;
- }
- }
-
- ev.duration = l;
- ev.pulse = is_pulse;
- ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
-}
-
-static irqreturn_t serial_ir_irq_handler(int i, void *blah)
-{
- ktime_t kt;
- int counter, dcd;
- u8 status;
- ktime_t delkt;
- unsigned int data;
- static int last_dcd = -1;
-
- if ((sinp(UART_IIR) & UART_IIR_NO_INT)) {
- /* not our interrupt */
- return IRQ_NONE;
- }
-
- counter = 0;
- do {
- counter++;
- status = sinp(UART_MSR);
- if (counter > RS_ISR_PASS_LIMIT) {
- dev_err(&serial_ir.pdev->dev, "Trapped in interrupt");
- break;
- }
- if ((status & hardware[type].signal_pin_change)
- && sense != -1) {
- /* get current time */
- kt = ktime_get();
-
- /*
- * The driver needs to know if your receiver is
- * active high or active low, or the space/pulse
- * sense could be inverted.
- */
-
- /* calc time since last interrupt in nanoseconds */
- dcd = (status & hardware[type].signal_pin) ? 1 : 0;
-
- if (dcd == last_dcd) {
- dev_err(&serial_ir.pdev->dev,
- "ignoring spike: %d %d %lldns %lldns\n",
- dcd, sense, ktime_to_ns(kt),
- ktime_to_ns(serial_ir.lastkt));
- continue;
- }
-
- delkt = ktime_sub(kt, serial_ir.lastkt);
- if (ktime_compare(delkt, ktime_set(15, 0)) > 0) {
- data = IR_MAX_DURATION; /* really long time */
- if (!(dcd^sense)) {
- /* sanity check */
- dev_err(&serial_ir.pdev->dev,
- "dcd unexpected: %d %d %lldns
%lldns\n",
- dcd, sense, ktime_to_ns(kt),
- ktime_to_ns(serial_ir.lastkt));
- /*
- * detecting pulse while this
- * MUST be a space!
- */
- sense = sense ? 0 : 1;
- }
- } else
- data = ktime_to_ns(delkt);
- frbwrite(data, !(dcd ^ sense));
- serial_ir.lastkt = kt;
- last_dcd = dcd;
- ir_raw_event_handle(serial_ir.rcdev);
- }
- } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
- return IRQ_HANDLED;
-}
-
-
-static int hardware_init_port(void)
-{
- u8 scratch, scratch2, scratch3;
-
- /*
- * This is a simple port existence test, borrowed from the autoconfig
- * function in drivers/serial/8250.c
- */
- scratch = sinp(UART_IER);
- soutp(UART_IER, 0);
-#ifdef __i386__
- outb(0xff, 0x080);
-#endif
- scratch2 = sinp(UART_IER) & 0x0f;
- soutp(UART_IER, 0x0f);
-#ifdef __i386__
- outb(0x00, 0x080);
-#endif
- scratch3 = sinp(UART_IER) & 0x0f;
- soutp(UART_IER, scratch);
- if (scratch2 != 0 || scratch3 != 0x0f) {
- /* we fail, there's nothing here */
- pr_err("port existence test failed, cannot continue\n");
- return -ENODEV;
- }
-
- /* Set DLAB 0. */
- soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
-
- /* First of all, disable all interrupts */
- soutp(UART_IER, sinp(UART_IER) &
- (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
-
- /* Clear registers. */
- sinp(UART_LSR);
- sinp(UART_RX);
- sinp(UART_IIR);
- sinp(UART_MSR);
-
- /* Set line for power source */
- off();
-
- /* Clear registers again to be sure. */
- sinp(UART_LSR);
- sinp(UART_RX);
- sinp(UART_IIR);
- sinp(UART_MSR);
-
- switch (type) {
- case IR_IRDEO:
- case IR_IRDEO_REMOTE:
- /* setup port to 7N1 @ 115200 Baud */
- /* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */
-
- /* Set DLAB 1. */
- soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
- /* Set divisor to 1 => 115200 Baud */
- soutp(UART_DLM, 0);
- soutp(UART_DLL, 1);
- /* Set DLAB 0 + 7N1 */
- soutp(UART_LCR, UART_LCR_WLEN7);
- /* THR interrupt already disabled at this point */
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-static int serial_ir_probe(struct platform_device *dev)
-{
- int i, nlow, nhigh, result;
-
- result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
- share_irq ? IRQF_SHARED : 0,
- KBUILD_MODNAME, &hardware);
- if (result < 0) {
- if (result == -EBUSY)
- dev_err(&dev->dev, "IRQ %d busy\n", irq);
- else if (result == -EINVAL)
- dev_err(&dev->dev, "Bad irq number or handler\n");
- return result;
- }
-
- /* Reserve io region. */
- if (((iommap)
- && (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
- KBUILD_MODNAME) == NULL))
- || ((!iommap)
- && (devm_request_region(&dev->dev, io, 8,
- KBUILD_MODNAME) == NULL))) {
- dev_err(&dev->dev, "port %04x already in use\n", io);
- dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
- dev_warn(&dev->dev,
- "or compile the serial port driver as module and\n");
- dev_warn(&dev->dev, "make sure this module is loaded first\n");
- return -EBUSY;
- }
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- /* Initialize pulse/space widths */
- init_timing_params(50, 38000);
-
- /* If pin is high, then this must be an active low receiver. */
- if (sense == -1) {
- /* wait 1/2 sec for the power supply */
- msleep(500);
-
- /*
- * probe 9 times every 0.04s, collect "votes" for
- * active high/low
- */
- nlow = 0;
- nhigh = 0;
- for (i = 0; i < 9; i++) {
- if (sinp(UART_MSR) & hardware[type].signal_pin)
- nlow++;
- else
- nhigh++;
- msleep(40);
- }
- sense = nlow >= nhigh ? 1 : 0;
- dev_info(&dev->dev, "auto-detected active %s receiver\n",
- sense ? "low" : "high");
- } else
- dev_info(&dev->dev, "Manually using active %s receiver\n",
- sense ? "low" : "high");
-
- dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
-}
-
-static int serial_ir_open(struct rc_dev *rcdev)
-{
- unsigned long flags;
-
- /* initialize timestamp */
- serial_ir.lastkt = ktime_get();
-
- spin_lock_irqsave(&hardware[type].lock, flags);
-
- /* Set DLAB 0. */
- soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
-
- soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
-
- spin_unlock_irqrestore(&hardware[type].lock, flags);
-
- return 0;
-}
-
-static void serial_ir_close(struct rc_dev *rcdev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&hardware[type].lock, flags);
-
- /* Set DLAB 0. */
- soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
-
- /* First of all, disable all interrupts */
- soutp(UART_IER, sinp(UART_IER) &
- (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
- spin_unlock_irqrestore(&hardware[type].lock, flags);
-}
-
-static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
- unsigned int count)
-{
- unsigned long flags;
- ktime_t edge;
- s64 delta;
- int i;
-
- spin_lock_irqsave(&hardware[type].lock, flags);
- if (type == IR_IRDEO) {
- /* DTR, RTS down */
- on();
- }
-
- edge = ktime_get();
- for (i = 0; i < count; i++) {
- if (i%2)
- hardware[type].send_space();
- else
- hardware[type].send_pulse(txbuf[i], edge);
-
- edge = ktime_add_us(edge, txbuf[i]);
- delta = ktime_us_delta(edge, ktime_get());
- if (delta > 25) {
- spin_unlock_irqrestore(&hardware[type].lock, flags);
- usleep_range(delta - 25, delta + 25);
- spin_lock_irqsave(&hardware[type].lock, flags);
- }
- else if (delta > 0)
- udelay(delta);
- }
- off();
- spin_unlock_irqrestore(&hardware[type].lock, flags);
- return count;
-}
-
-static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle)
-{
- init_timing_params(cycle, serial_ir.freq);
- return 0;
-}
-
-static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier)
-{
- if (carrier > 500000 || carrier < 20000)
- return -EINVAL;
-
- init_timing_params(serial_ir.duty_cycle, carrier);
- return 0;
-}
-
-static int serial_ir_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- /* Set DLAB 0. */
- soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
-
- /* Disable all interrupts */
- soutp(UART_IER, sinp(UART_IER) &
- (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
-
- /* Clear registers. */
- sinp(UART_LSR);
- sinp(UART_RX);
- sinp(UART_IIR);
- sinp(UART_MSR);
-
- return 0;
-}
-
-static int serial_ir_resume(struct platform_device *dev)
-{
- unsigned long flags;
- int result;
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- spin_lock_irqsave(&hardware[type].lock, flags);
- /* Enable Interrupt */
- serial_ir.lastkt = ktime_get();
- soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
- off();
-
- spin_unlock_irqrestore(&hardware[type].lock, flags);
-
- return 0;
-}
-
-static struct platform_driver serial_ir_driver = {
- .probe = serial_ir_probe,
- .suspend = serial_ir_suspend,
- .resume = serial_ir_resume,
- .driver = {
- .name = "serial_ir",
- },
-};
-
-static int __init serial_ir_init(void)
-{
- int result;
-
- result = platform_driver_register(&serial_ir_driver);
- if (result)
- return result;
-
- serial_ir.pdev = platform_device_alloc("serial_ir", 0);
- if (!serial_ir.pdev) {
- result = -ENOMEM;
- goto exit_driver_unregister;
- }
-
- result = platform_device_add(serial_ir.pdev);
- if (result)
- goto exit_device_put;
-
- return 0;
-
-exit_device_put:
- platform_device_put(serial_ir.pdev);
-exit_driver_unregister:
- platform_driver_unregister(&serial_ir_driver);
- return result;
-}
-
-static void serial_ir_exit(void)
-{
- platform_device_unregister(serial_ir.pdev);
- platform_driver_unregister(&serial_ir_driver);
-}
-
-static int __init serial_ir_init_module(void)
-{
- struct rc_dev *rcdev;
- int result;
-
- switch (type) {
- case IR_HOMEBREW:
- case IR_IRDEO:
- case IR_IRDEO_REMOTE:
- case IR_ANIMAX:
- case IR_IGOR:
- /* if nothing specified, use ttyS0/com1 and irq 4 */
- io = io ? io : 0x3f8;
- irq = irq ? irq : 4;
- break;
- default:
- return -EINVAL;
- }
- if (!softcarrier) {
- switch (type) {
- case IR_HOMEBREW:
- case IR_IGOR:
- hardware[type].set_send_carrier = false;
- hardware[type].set_duty_cycle = false;
- break;
- }
- }
-
- /* make sure sense is either -1, 0, or 1 */
- if (sense != -1)
- sense = !!sense;
-
- result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->driver_type = RC_DRIVER_IR_RAW;
- rcdev->allowed_protocols = RC_BIT_ALL;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
- if (!result)
- return 0;
-serial_cleanup:
- serial_ir_exit();
- return result;
-}
-
-static void __exit serial_ir_exit_module(void)
-{
- rc_unregister_device(serial_ir.rcdev);
- serial_ir_exit();
-}
-
-module_init(serial_ir_init_module);
-module_exit(serial_ir_exit_module);
-
-MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
-MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus,
Andrei Tanas");
-MODULE_LICENSE("GPL");
-
-module_param(type, int, 0444);
-MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo
Remote, 3 = AnimaX, 4 = IgorPlug");
-
-module_param(io, int, 0444);
-MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
-
-/* some architectures (e.g. intel xscale) have memory mapped registers */
-module_param(iommap, bool, 0444);
-MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory
mapped io)");
-
-/*
- * some architectures (e.g. intel xscale) align the 8bit serial registers
- * on 32bit word boundaries.
- * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out()
- */
-module_param(ioshift, int, 0444);
-MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
-
-module_param(irq, int, 0444);
-MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
-
-module_param(share_irq, bool, 0444);
-MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
-
-module_param(sense, int, 0444);
-MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit (0 =
active high, 1 = active low )");
-
-#ifdef CONFIG_IR_SERIAL_TRANSMITTER
-module_param(txsense, bool, 0444);
-MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 =
active low )");
-#endif
-
-module_param(softcarrier, bool, 0444);
-MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default
on)");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
