Hi Mauro,
Thank you for the patch.
On Thursday 08 Dec 2016 06:55:58 Mauro Carvalho Chehab wrote:
> changeset 460b6c0831cb ("[media] tvp5150: Add s_stream subdev operation
> support") added a logic that overrides TVP5150_CONF_SHARED_PIN setting,
> depending on the type of bus set via the .set_fmt() subdev callback.
>
> This is known to cause trobules on devices that don't use a V4L2
> subdev devnode, and a fix for it was made by changeset 47de9bf8931e
> ("[media] tvp5150: Fix breakage for serial usage"). Unfortunately,
> such fix doesn't consider the case of progressive video inputs,
> causing chroma decoding issues on such videos, as it overrides not
> only the type of video output, but also other unrelated bits.
>
> So, instead of trying to guess, let's detect if the device is set
> via a V4L2 subdev node or not. If not, just ignore the bogus logic.
>
> Fixes: 460b6c0831cb ("[media] tvp5150: Add s_stream subdev operation
> support") Cc: Devin Heitmueller <dheitmuel...@kernellabs.com>
> Cc: Javier Martinez Canillas <jav...@osg.samsung.com>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>,
> Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
> ---
>
> Devin,
>
> I didn't test this patch. As I explained on my previous e-mail, my current
> test scenario for analog TV inputs is not ideal, as I lack progressive
> video and RF output testcases.
>
> Could you please test if this will fix for you?
>
> Laurent/Javier,
>
> With regards to OMAP3, it would be good to try to reproduce the issues
> Devin noticed on your hardware, testing with both progressive and interlaced
> sources and checking if the chroma is being decoded properly or not with a
> NTSC signal.
>
> drivers/media/i2c/tvp5150.c | 7 ++++++-
> drivers/media/platform/pxa_camera.c | 1 +
> drivers/media/platform/soc_camera/soc_mediabus.c | 1 +
> include/media/v4l2-mediabus.h | 3 +++
> 4 files changed, 11 insertions(+), 1 deletion(-)
[snip]
> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> index 34cc99e093ef..8af6b96d628b 100644
> --- a/include/media/v4l2-mediabus.h
> +++ b/include/media/v4l2-mediabus.h
> @@ -70,11 +70,14 @@
> * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can
> * also be used for BT.1120
> * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
> + * @V4L2_MBUS_UNKNOWN: used to indicate that the device is not
controlled
> + * via a V4L2 subdev devnode interface
Please, don't. v4l2_mbus_type has nothing to do with subdev device nodes. It
identifies the type of physical bus used to carry video data.
> */
> enum v4l2_mbus_type {
> V4L2_MBUS_PARALLEL,
> V4L2_MBUS_BT656,
> V4L2_MBUS_CSI2,
> + V4L2_MBUS_UNKNOWN,
> };
>
> /**
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
