From: Hans Verkuil <[email protected]>
This patch series converts the soc-camera atmel-isi to a standalone V4L2
driver.
The same is done for the ov7670 and ov2640 sensor drivers: the ov7670 was
used to test the atmel-isi driver. The ov2640 is needed because the em28xx
driver has a soc_camera include dependency. Both ov7670 and ov2640 sensors
have been tested with the atmel-isi driver.
The first 6 patches improve the ov7670 sensor driver, mostly adding modern
features such as MC and DT support.
The next three convert the atmel-isi and move it out of soc_camera.
The following 3 patches convert ov2640 and drop the soc_camera dependency
in em28xx (untested!). I'll ask Frank Schaefer who authored this if he
can test this em28xx code.
The last two patches add isi support to the DT: the first for the ov7670
sensor, the second modifies it for the ov2640 sensor.
These two final patches are for demonstration purposes only, I do not plan
on merging them.
Tested with my sama5d3-Xplained board, the ov2640 sensor and two ov7670
sensors: one with and one without reset/pwdn pins.
I believe I have addressed all comments made by Laurent and Sakari for my
original RFC patch series.
Regards,
Hans
Hans Verkuil (15):
ov7670: add media controller support
ov7670: call v4l2_async_register_subdev
ov7670: fix g/s_parm
ov7670: get xclk
ov7670: add devicetree support
ov7670: document device tree bindings
atmel-isi: remove dependency of the soc-camera framework
atmel-isi: move out of soc_camera to atmel
atmel-isi: document device tree bindings
ov2640: convert from soc-camera to a standard subdev sensor driver.
ov2640: enable clock, fix power/reset and add MC support
ov2640 bindings update
em28xx: drop last soc_camera link
sama5d3 dts: enable atmel-isi
at91-sama5d3_xplained.dts: select ov2640
.../devicetree/bindings/media/atmel-isi.txt | 91 +-
.../devicetree/bindings/media/i2c/ov2640.txt | 22 +-
.../devicetree/bindings/media/i2c/ov7670.txt | 44 +
MAINTAINERS | 1 +
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 61 +-
arch/arm/boot/dts/sama5d3.dtsi | 4 +-
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/{soc_camera => }/ov2640.c | 182 +--
drivers/media/i2c/ov7670.c | 98 +-
drivers/media/i2c/soc_camera/Kconfig | 6 -
drivers/media/i2c/soc_camera/Makefile | 1 -
drivers/media/platform/Makefile | 1 +
drivers/media/platform/atmel/Kconfig | 11 +-
drivers/media/platform/atmel/Makefile | 1 +
drivers/media/platform/atmel/atmel-isi.c | 1413 ++++++++++++++++++++
.../platform/{soc_camera => atmel}/atmel-isi.h | 0
drivers/media/platform/soc_camera/Kconfig | 11 -
drivers/media/platform/soc_camera/Makefile | 1 -
drivers/media/platform/soc_camera/atmel-isi.c | 1167 ----------------
drivers/media/usb/em28xx/em28xx-camera.c | 9 -
21 files changed, 1751 insertions(+), 1385 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7670.txt
rename drivers/media/i2c/{soc_camera => }/ov2640.c (90%)
create mode 100644 drivers/media/platform/atmel/atmel-isi.c
rename drivers/media/platform/{soc_camera => atmel}/atmel-isi.h (100%)
delete mode 100644 drivers/media/platform/soc_camera/atmel-isi.c
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html