[PATCH] [media] rc: raw decoder for keymap protocol is not loaded on register

[Sean Young]

When the protocol is set via the sysfs protocols attribute, the
decoder is loaded. However, when it is not when a device is first
plugged in or registered.

Fixes: acc1c3c ("[media] media: rc: load decoder modules on-demand")

Signed-off-by: Sean Young <s...@mess.org>
Cc: <sta...@kernel.org> # v4.5+
---
 drivers/media/rc/rc-main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 2424946..a158b32 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1663,6 +1663,7 @@ static int rc_setup_rx_device(struct rc_dev *dev)
 {
        int rc;
        struct rc_map *rc_map;
+       u64 rc_type;
 
        if (!dev->map_name)
                return -EINVAL;
@@ -1677,15 +1678,18 @@ static int rc_setup_rx_device(struct rc_dev *dev)
        if (rc)
                return rc;
 
-       if (dev->change_protocol) {
-               u64 rc_type = (1ll << rc_map->rc_type);
+       rc_type = BIT_ULL(rc_map->rc_type);
 
+       if (dev->change_protocol) {
                rc = dev->change_protocol(dev, &rc_type);
                if (rc < 0)
                        goto out_table;
                dev->enabled_protocols = rc_type;
        }
 
+       if (dev->driver_type == RC_DRIVER_IR_RAW)
+               ir_raw_load_modules(&rc_type);
+
        set_bit(EV_KEY, dev->input_dev->evbit);
        set_bit(EV_REP, dev->input_dev->evbit);
        set_bit(EV_MSC, dev->input_dev->evbit);
-- 
2.9.3