pt1 is here http://linuxtv.org/pipermail/linux-dvb/2009-August/032334.html

I have a Lifeview Hybrid Pci card and since around August 2009 the driver 
doesn't work in 64bit linux but works only in 32bit linux.
Now, I am using vanilla 2.6.31.5 source with latest mercurial v4b-dvb snapshot.

I tried today again in my 64bit system to see if the driver works but again I 
discovered that it just doesn't work. I am using the same firmware on both 32 
and 64bit linux installations and in 32bits I have no problem, everything 
works. I am choosing the same options in both 32 and 64bit installations.

The error that I get is in the attachement.
It complains about firmware but the firmware is exactly the same with my 32bit 
installation where things work. 

What's wrong with the saa7134 driver ?



Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
saa7134 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
saa7133[0]: found at 0000:05:07.0, rev: 209, irq: 17, latency: 32, mmio: 0xd0000000
saa7133[0]: subsystem: 5168:3306, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected]
saa7133[0]: board init: gpio is 210000
IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]: i2c eeprom 00: 68 51 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 16 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-adapter i2c-2: Invalid 7-bit address 0x7a
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tda829x 2-004b: setting tuner address to 61
tda829x 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]/alsa: saa7133[0] at 0xd0000000 irq 17 registered as card -1
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision ea -- invalid
tda1004x: trying to boot from eeprom
tda1004x: found firmware revision ea -- invalid
tda1004x: waiting for firmware upload...
saa7134 0000:05:07.0: firmware: requesting dvb-fe-tda10046.fw
tda1004x: Error during firmware upload
tda1004x: found firmware revision ea -- invalid
tda1004x: firmware upload failed
tda827x_probe_version: could not read from tuner at addr: 0xc2

Reply via email to