With an unknown sensor, norm_maxw() and norm_maxh() return 0 as max.
height and width values, which causes a devide by zero in size_to_scale().
Of course we could use speculative default values for unknown sensors,
but the chance that the device works at this resolution without any
driver/setup is very low and therefore not worth the efforts.
Instead, just don't treat the device as camera.
A message will then be printed to the log that the device isn't supported.
Signed-off-by: Frank Schäfer <fschaefer....@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
b/drivers/media/usb/em28xx/em28xx-cards.c
index 5f80a1b2fb8c..48c7fec47509 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2917,7 +2917,9 @@ static void em28xx_card_setup(struct em28xx *dev)
* If sensor is not found, then it isn't a webcam.
*/
if (dev->board.is_webcam) {
- if (em28xx_detect_sensor(dev) < 0)
+ em28xx_detect_sensor(dev);
+ if (dev->em28xx_sensor == EM28XX_NOSENSOR)
+ /* NOTE: error/unknown sensor/no sensor */
dev->board.is_webcam = 0;
}
@@ -3665,9 +3667,11 @@ static int em28xx_usb_probe(struct usb_interface
*interface,
try_bulk = usb_xfer_mode > 0;
}
- /* Disable V4L2 if the device doesn't have a decoder */
+ /* Disable V4L2 if the device doesn't have a decoder or image sensor */
if (has_video &&
- dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) {
+ dev->board.decoder == EM28XX_NODECODER &&
+ dev->em28xx_sensor == EM28XX_NOSENSOR) {
+
dev_err(&interface->dev,
"Currently, V4L2 is not supported on this model\n");
has_video = false;
--
2.12.2
