Hi Lukas, Petr and Eddi,

thanks for working on it.

Am Samstag, den 31.10.2009, 21:21 +0100 schrieb Lukáš Karas:
> Hi all, 
> here is patch for multifrontend support in saa7134 driver. It is derived from 
> patches on page http://tux.dpeddi.com/lr319sta/
> 
> This patch has effect on these cards:
>  * FlyDVB Trio
>  * Medion MD8800 Quadro
>  * ASUSTeK Tiger 3in1

The a little bit hidden low profile triple CTX948 is also involved, just
to have it mentioned. We treat it like the Medion MD8800 Quadro, CTX944,
with subsystem 16be:0007.

> It was tested with FlyDVB Trio card.
> If you could, please test it with other cards too.

Some first tests on the CTX944 don't look such promising yet.
On DVB-T only one transponder remains and even that one is heavily
disturbed.

On DVB-S only about one third of the previous services is still
available. Lots of such.

saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1) returns 0
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0)

I do have the Asus Tiger 3in1 and the triple CTX948 too, but can't
promise when I get time to test on those less complicated devices.

Cheers,
Hermann

> Regards, 
> Lukas
> 
> 
> Signed-off-by: Lukas Karas <lukas.ka...@centrum.cz>
> Tested-by: Petr Fiala <petr.fi...@gmail.com>
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-cards.c 
> ./linux/drivers/media/video/saa7134/saa7134-
> cards.c
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-cards.c  
> 2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134-cards.c       2009-10-31 
> 17:47:51.000000000 +0100
> @@ -614,6 +614,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 1,
> @@ -1352,6 +1353,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>                .mpeg           = SAA7134_MPEG_DVB,
> +              .num_frontends  = 1,
>                .inputs         = {{
>                        .name = name_tv,
>                        .vmux = 1,
> @@ -1895,6 +1897,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | 
> TDA9887_PORT2_INACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 3,
> @@ -1987,6 +1990,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .gpiomask       = 0x00200000,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -2020,6 +2024,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_comp1,
>                       .vmux   = 0,
> @@ -2126,6 +2131,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x00200000,
>               .inputs         = {{
>                       .name = name_tv,
> @@ -2426,6 +2432,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 3,
> @@ -2450,6 +2457,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 3,
> @@ -2473,6 +2481,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_comp1,
>                       .vmux   = 0,
> @@ -2596,6 +2605,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_comp1,
>                       .vmux = 3,
> @@ -2670,6 +2680,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .gpiomask       = 1 << 21,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -2761,6 +2772,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 0,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200000,
>               .inputs = {{
>                       .name   = name_tv,
> @@ -2853,6 +2865,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .gpiomask       = 0x00200000,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 2,
>               .inputs         = {{
>                       .name = name_tv,        /* Analog broadcast/cable TV */
>                       .vmux = 1,
> @@ -2886,6 +2899,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_comp1,
>                       .vmux   = 1,
> @@ -2906,6 +2920,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_comp1,     /* Composite input */
>                       .vmux = 3,
> @@ -2924,6 +2939,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
>               .inputs = {{
>                       .name   = name_tv,
> @@ -2941,6 +2957,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 1 << 21,
>               .inputs = {{
>                       .name   = name_tv,
> @@ -2974,6 +2991,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 1 << 21,
>               .inputs = {{
>                       .name   = name_tv,
> @@ -3004,6 +3022,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -3107,6 +3126,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1
>       },
>       [SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = {
>               .name           = "LifeView FlyDVB-T Hybrid Cardbus/MSI TV 
> @nywhere A/D NB",
> @@ -3116,6 +3136,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
>               .inputs         = {{
>                       .name = name_tv,
> @@ -3199,6 +3220,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 2,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 1,
> @@ -3224,6 +3246,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_comp1,     /* Composite input */
>                       .vmux = 3,
> @@ -3275,6 +3298,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = 0x60,
>               .tda9887_conf   = TDA9887_PRESENT,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -3303,6 +3327,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT| TDA9887_PORT1_ACTIVE | 
> TDA9887_PORT2_ACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 3,
> @@ -3331,6 +3356,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 1,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x000200000,
>               .inputs         = {{
>                       .name = name_tv,
> @@ -3409,6 +3435,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 3,
> @@ -3435,6 +3462,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 1,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200100,
>               .inputs         = {{
>                       .name = name_tv,
> @@ -3466,6 +3494,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 3,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .ts_type        = SAA7134_MPEG_TS_SERIAL,
>               .gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
>               .inputs         = {{
> @@ -3498,6 +3527,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 3,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .ts_type        = SAA7134_MPEG_TS_SERIAL,
>               .gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
>               .inputs         = {{
> @@ -3529,6 +3559,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 1,
> @@ -3666,6 +3697,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv,
>                       .vmux   = 1,
> @@ -3690,6 +3722,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 2,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200000,
>               .inputs = {{
>                       .name   = name_tv,
> @@ -3743,6 +3776,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 2,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200000,
>               .inputs = {{
>                       .name   = name_tv,
> @@ -3762,6 +3796,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_config   = 2,
>               .gpiomask       = 1 << 21,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -3894,6 +3929,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 0,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_tv, /* FIXME: analog tv untested */
>                       .vmux   = 1,
> @@ -4777,6 +4813,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = {{
>                       .name   = name_comp1,
>                       .vmux   = 3,
> @@ -4796,6 +4833,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr   = ADDR_UNSET,
>               .tuner_config = 0,
>               .mpeg         = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs       = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -4820,6 +4858,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 2,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200000,
>               .inputs = { {
>                       .name   = name_tv,
> @@ -4849,6 +4888,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>                .mpeg           = SAA7134_MPEG_DVB,
> +              .num_frontends  = 1,
>                .inputs         = {{
>                        .name = name_tv,
>                        .vmux = 1,
> @@ -4876,6 +4916,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -4953,6 +4994,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = { {
>                       .name = name_comp,
>                       .vmux = 1,
> @@ -4972,6 +5014,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = { {
>                       .name   = name_tv,
>                       .vmux   = 4,
> @@ -5001,6 +5044,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 3,
> @@ -5030,6 +5074,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_config   = 2,
>               .gpiomask       = 1 << 21,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 2,
>               .inputs         = {{
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -5094,6 +5139,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = { {
>                       .name = name_tv,
>                       .vmux = 1,
> @@ -5118,6 +5164,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 0,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .gpiomask       = 0x0200000,
>               .inputs = { {
>                       .name   = name_tv,
> @@ -5259,6 +5306,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = { {
>                       .name   = name_comp1,
>                       .vmux   = 0,
> @@ -5278,6 +5326,7 @@ struct saa7134_board saa7134_boards[] =
>               .tuner_addr     = ADDR_UNSET,
>               .radio_addr     = ADDR_UNSET,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs         = { {
>                       .name = name_tv,
>                       .vmux = 2,
> @@ -5306,6 +5355,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tuner_config   = 0,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .ts_type        = SAA7134_MPEG_TS_PARALLEL,
>               .inputs         = {{
>                       .name = name_tv,
> @@ -5327,6 +5377,7 @@ struct saa7134_board saa7134_boards[] =
>               .radio_addr     = ADDR_UNSET,
>               .tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>               .mpeg           = SAA7134_MPEG_DVB,
> +             .num_frontends  = 1,
>               .inputs = { {
>                       .name   = name_tv,
>                       .vmux   = 3,
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-dvb.c 
> ./linux/drivers/media/video/saa7134/saa7134-
> dvb.c
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-dvb.c    
> 2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134-dvb.c 2009-10-31 
> 20:51:59.000000000 +0100
> @@ -68,10 +68,6 @@ static unsigned int antenna_pwr;
>  module_param(antenna_pwr, int, 0444);
>  MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
> 
> -static int use_frontend;
> -module_param(use_frontend, int, 0644);
> -MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: 
> terrestrial, 1: satellite)");
> -
>  static int debug;
>  module_param(debug, int, 0644);
>  MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
> @@ -543,19 +539,15 @@ static int philips_tda827x_tuner_sleep(s
>  }
> 
>  static int configure_tda827x_fe(struct saa7134_dev *dev,
> +                             struct videobuf_dvb_frontend *fe,
>                               struct tda1004x_config *cdec_conf,
>                               struct tda827x_config *tuner_conf)
>  {
> -     struct videobuf_dvb_frontend *fe0;
> -
> -     /* Get the first frontend */
> -     fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
> -
> -     fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, 
> &dev->i2c_adap);
> -     if (fe0->dvb.frontend) {
> +     fe->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, 
> &dev->i2c_adap);
> +     if (fe->dvb.frontend) {
>               if (cdec_conf->i2c_gate)
> -                     fe0->dvb.frontend->ops.i2c_gate_ctrl = 
> tda8290_i2c_gate_ctrl;
> -             if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
> +                     fe->dvb.frontend->ops.i2c_gate_ctrl = 
> tda8290_i2c_gate_ctrl;
> +             if (dvb_attach(tda827x_attach, fe->dvb.frontend,
>                              cdec_conf->tuner_address,
>                              &dev->i2c_adap, tuner_conf))
>                       return 0;
> @@ -1075,193 +1067,246 @@ static struct tda18271_config dtv1000s_t
>   * Core code
>   */
> 
> +static int saa7134_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
> +{
> +     struct saa7134_dev *dev = fe->dvb->priv;
> +     int ret = 0;
> +     int fe_id;
> +
> +     dprintk("%s(acquire=%d)\n", __func__, acquire);
> +
> +     fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe);
> +     if (!fe_id) {
> +             printk(KERN_ERR "%s() No frontend found\n", __func__);
> +             return -EINVAL;
> +     }
> +
> +     if(acquire) {
> +             if (dev->frontends.active_fe_id != 0)
> +                     return -EBUSY;
> +             else
> +                     dev->frontends.active_fe_id = fe_id;
> +
> +             if (dev->frontends.active_fe_id == 1) {
> +                     /* try to reset the hardware (SWRST) */
> +                     saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
> +                     msleep(10);
> +                     saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
> +                     udelay(1000);
> +             }
> +             if (dev->frontends.active_fe_id == 2) {
> +                     /* try to reset the hardware (SWRST) */
> +                     saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
> +                     msleep(10);
> +                     saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
> +                     udelay(1000);
> +             }
> +     } else {
> +             dev->frontends.active_fe_id = 0;
> +     }
> +
> +     dprintk("%s(acquire=%d) returns %d\n", __func__, acquire, ret);
> +     return ret;
> +}
> +
>  static int dvb_init(struct saa7134_dev *dev)
>  {
> -     int ret;
> +     int ret, i;
>       int attach_xc3028 = 0;
> -     struct videobuf_dvb_frontend *fe0;
> +     struct videobuf_dvb_frontend *last_fe = NULL;
> +     struct videobuf_dvb_frontend *fe;
> 
> -     /* FIXME: add support for multi-frontend */
>       mutex_init(&dev->frontends.lock);
>       INIT_LIST_HEAD(&dev->frontends.felist);
> 
> -     printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
> -     fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
> -     if (!fe0) {
> -             printk(KERN_ERR "%s() failed to alloc\n", __func__);
> -             return -ENOMEM;
> +     if (!saa7134_boards[dev->board].num_frontends) {
> +             printk(KERN_ERR "%s() .num_frontends should be non-zero\n", 
> __func__);
> +             return -ENODEV;
>       }
> -
> +
>       /* init struct videobuf_dvb */
>       dev->ts.nr_bufs    = 32;
>       dev->ts.nr_packets = 32*4;
> -     fe0->dvb.name = dev->name;
> -     videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
> -                         &dev->pci->dev, &dev->slock,
> -                         V4L2_BUF_TYPE_VIDEO_CAPTURE,
> -                         V4L2_FIELD_ALTERNATE,
> -                         sizeof(struct saa7134_buf),
> -                         dev);
> 
> +     /* init frontends */
> +     printk(KERN_ERR "%s() allocating %d frontends\n", __func__, 
> saa7134_boards[dev->board].num_frontends);
> +     for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +             last_fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
> +             if(last_fe == NULL) {
> +                     printk(KERN_ERR "%s() failed to alloc\n", __func__);
> +                     goto dettach_frontend;
> +             }
> +             last_fe->dvb.name = dev->name;
> +             videobuf_queue_sg_init(&last_fe->dvb.dvbq, &saa7134_ts_qops,
> +                                                             &dev->pci->dev, 
> &dev->slock,
> +                                                             
> V4L2_BUF_TYPE_VIDEO_CAPTURE,
> +                                                             
> V4L2_FIELD_ALTERNATE,
> +                                                             sizeof(struct 
> saa7134_buf),
> +                                                             dev);
> +     }
> +
>       switch (dev->board) {
>       case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
>               dprintk("pinnacle 300i dvb setup\n");
> -             fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
> +             last_fe->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     fe0->dvb.frontend->ops.tuner_ops.set_params = 
> mt352_pinnacle_tuner_set_params;
> +             if (last_fe->dvb.frontend) {
> +                     last_fe->dvb.frontend->ops.tuner_ops.set_params = 
> mt352_pinnacle_tuner_set_params;
>               }
>               break;
>       case SAA7134_BOARD_AVERMEDIA_777:
>       case SAA7134_BOARD_AVERMEDIA_A16AR:
>               dprintk("avertv 777 dvb setup\n");
> -             fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
> +             last_fe->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x61,
>                                  TUNER_PHILIPS_TD1316);
>               }
>               break;
>       case SAA7134_BOARD_AVERMEDIA_A16D:
>               dprintk("AverMedia A16D dvb setup\n");
> -             fe0->dvb.frontend = dvb_attach(mt352_attach,
> +             last_fe->dvb.frontend = dvb_attach(mt352_attach,
>                                               &avermedia_xc3028_mt352_dev,
>                                               &dev->i2c_adap);
>               attach_xc3028 = 1;
>               break;
>       case SAA7134_BOARD_MD7134:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &medion_cardbus,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, medion_cardbus.tuner_address,
>                                  TUNER_PHILIPS_FMD1216ME_MK3);
>               }
>               break;
>       case SAA7134_BOARD_PHILIPS_TOUGH:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &philips_tu1216_60_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     fe0->dvb.frontend->ops.tuner_ops.init = 
> philips_tu1216_init;
> -                     fe0->dvb.frontend->ops.tuner_ops.set_params = 
> philips_tda6651_pll_set;
> +             if (last_fe->dvb.frontend) {
> +                     last_fe->dvb.frontend->ops.tuner_ops.init = 
> philips_tu1216_init;
> +                     last_fe->dvb.frontend->ops.tuner_ops.set_params = 
> philips_tda6651_pll_set;
>               }
>               break;
>       case SAA7134_BOARD_FLYDVBTDUO:
>       case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
> -             if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
> +             if (configure_tda827x_fe(dev, last_fe, &tda827x_lifeview_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_PHILIPS_EUROPA:
>       case SAA7134_BOARD_VIDEOMATE_DVBT_300:
>       case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &philips_europa_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dev->original_demod_sleep = 
> fe0->dvb.frontend->ops.sleep;
> -                     fe0->dvb.frontend->ops.sleep = 
> philips_europa_demod_sleep;
> -                     fe0->dvb.frontend->ops.tuner_ops.init = 
> philips_europa_tuner_init;
> -                     fe0->dvb.frontend->ops.tuner_ops.sleep = 
> philips_europa_tuner_sleep;
> -                     fe0->dvb.frontend->ops.tuner_ops.set_params = 
> philips_td1316_tuner_set_params;
> +             if (last_fe->dvb.frontend) {
> +                     dev->original_demod_sleep = 
> last_fe->dvb.frontend->ops.sleep;
> +                     last_fe->dvb.frontend->ops.sleep = 
> philips_europa_demod_sleep;
> +                     last_fe->dvb.frontend->ops.tuner_ops.init = 
> philips_europa_tuner_init;
> +                     last_fe->dvb.frontend->ops.tuner_ops.sleep = 
> philips_europa_tuner_sleep;
> +                     last_fe->dvb.frontend->ops.tuner_ops.set_params = 
> philips_td1316_tuner_set_params;
>               }
>               break;
>       case SAA7134_BOARD_VIDEOMATE_DVBT_200:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &philips_tu1216_61_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     fe0->dvb.frontend->ops.tuner_ops.init = 
> philips_tu1216_init;
> -                     fe0->dvb.frontend->ops.tuner_ops.set_params = 
> philips_tda6651_pll_set;
> +             if (last_fe->dvb.frontend) {
> +                     last_fe->dvb.frontend->ops.tuner_ops.init = 
> philips_tu1216_init;
> +                     last_fe->dvb.frontend->ops.tuner_ops.set_params = 
> philips_tda6651_pll_set;
>               }
>               break;
>       case SAA7134_BOARD_KWORLD_DVBT_210:
> -             if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
> +             if (configure_tda827x_fe(dev, last_fe, &kworld_dvb_t_210_config,
>                                        &tda827x_cfg_2) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_HAUPPAUGE_HVR1120:
> -             fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>                                              &hcw_tda10048_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend != NULL) {
> -                     dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend != NULL) {
> +                     dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x4b,
>                                  &tda829x_no_probe);
> -                     dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +                     dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>                                  0x60, &dev->i2c_adap,
>                                  &hcw_tda18271_config);
>               }
>               break;
>       case SAA7134_BOARD_PHILIPS_TIGER:
> -             if (configure_tda827x_fe(dev, &philips_tiger_config,
> +             if (configure_tda827x_fe(dev, last_fe, &philips_tiger_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_PINNACLE_PCTV_310i:
> -             if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
> +             if (configure_tda827x_fe(dev, last_fe, 
> &pinnacle_pctv_310i_config,
>                                        &tda827x_cfg_1) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_HAUPPAUGE_HVR1110:
> -             if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
> +             if (configure_tda827x_fe(dev, last_fe, 
> &hauppauge_hvr_1110_config,
>                                        &tda827x_cfg_1) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_HAUPPAUGE_HVR1150:
> -             fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
> +             last_fe->dvb.frontend = dvb_attach(lgdt3305_attach,
>                                              &hcw_lgdt3305_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x4b,
>                                  &tda829x_no_probe);
> -                     dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +                     dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>                                  0x60, &dev->i2c_adap,
>                                  &hcw_tda18271_config);
>               }
>               break;
>       case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
> -             if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
> +             if (configure_tda827x_fe(dev, last_fe, &asus_p7131_dual_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_FLYDVBT_LR301:
> -             if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
> +             if (configure_tda827x_fe(dev, last_fe, &tda827x_lifeview_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_FLYDVB_TRIO:
> -             if (!use_frontend) {    /* terrestrial */
> -                     if (configure_tda827x_fe(dev, &lifeview_trio_config,
> -                                              &tda827x_cfg_0) < 0)
> +             /* terrestrial */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +             if (configure_tda827x_fe(dev, fe, &lifeview_trio_config,
> +                                             &tda827x_cfg_0) < 0)
> +                     goto dettach_frontend;
> +
> +             /* satellite */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +             fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 
> &dev->i2c_adap);
> +             if (fe->dvb.frontend) {
> +                     fe->dvb.frontend->id = 1;
> +                     if (dvb_attach(tda826x_attach, fe->dvb.frontend, 0x63,
> +                                                             &dev->i2c_adap, 
> 0) == NULL) {
> +                             wprintk("%s: Lifeview Trio, No tda826x 
> found!\n", __func__);
> +                             goto dettach_frontend;
> +                     }
> +                     if (dvb_attach(isl6421_attach, fe->dvb.frontend, 
> &dev->i2c_adap,
> +                                                                     0x08, 
> 0, 0) == NULL) {
> +                             wprintk("%s: Lifeview Trio, No ISL6421 
> found!\n", __func__);
>                               goto dettach_frontend;
> -             } else {                /* satellite */
> -                     fe0->dvb.frontend = dvb_attach(tda10086_attach, 
> &flydvbs, &dev->i2c_adap);
> -                     if (fe0->dvb.frontend) {
> -                             if (dvb_attach(tda826x_attach, 
> fe0->dvb.frontend, 0x63,
> -                                                                     
> &dev->i2c_adap, 0) == NULL) {
> -                                     wprintk("%s: Lifeview Trio, No tda826x 
> found!\n", __func__);
> -                                     goto dettach_frontend;
> -                             }
> -                             if (dvb_attach(isl6421_attach, 
> fe0->dvb.frontend, &dev->i2c_adap,
> -                                                                             
> 0x08, 0, 0) == NULL) {
> -                                     wprintk("%s: Lifeview Trio, No ISL6421 
> found!\n", __func__);
> -                                     goto dettach_frontend;
> -                             }
>                       }
>               }
>               break;
>       case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
>       case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &ads_tech_duo_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     if (dvb_attach(tda827x_attach,last_fe->dvb.frontend,
>                                  ads_tech_duo_config.tuner_address, 
> &dev->i2c_adap,
>                                                               &ads_duo_cfg) 
> == NULL) {
>                               wprintk("no tda827x tuner found at addr: 
> %02x\n",
> @@ -1272,83 +1317,86 @@ static int dvb_init(struct saa7134_dev *
>                       wprintk("failed to attach tda10046\n");
>               break;
>       case SAA7134_BOARD_TEVION_DVBT_220RF:
> -             if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
> +             if (configure_tda827x_fe(dev, last_fe, &tevion_dvbt220rf_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_MEDION_MD8800_QUADRO:
> -             if (!use_frontend) {     /* terrestrial */
> -                     if (configure_tda827x_fe(dev, &md8800_dvbt_config,
> -                                              &tda827x_cfg_0) < 0)
> +             /* terrestrial */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +             if (configure_tda827x_fe(dev, fe, &md8800_dvbt_config,
> +                                             &tda827x_cfg_0) < 0)
> +                     goto dettach_frontend;
> +
> +             /* satellite */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +             fe->dvb.frontend = dvb_attach(tda10086_attach,
> +                                             &flydvbs, &dev->i2c_adap);
> +             if (fe->dvb.frontend) {
> +                     struct dvb_frontend *dvb_fe = fe->dvb.frontend;
> +                     u8 dev_id = dev->eedata[2];
> +                     u8 data = 0xc4;
> +                     struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 
> 1};
> +                     fe->dvb.frontend->id = 1;
> +
> +                     if (dvb_attach(tda826x_attach, dvb_fe,
> +                                     0x60, &dev->i2c_adap, 0) == NULL) {
> +                             wprintk("%s: Medion Quadro, no tda826x "
> +                                     "found !\n", __func__);
>                               goto dettach_frontend;
> -             } else {        /* satellite */
> -                     fe0->dvb.frontend = dvb_attach(tda10086_attach,
> -                                                     &flydvbs, 
> &dev->i2c_adap);
> -                     if (fe0->dvb.frontend) {
> -                             struct dvb_frontend *fe = fe0->dvb.frontend;
> -                             u8 dev_id = dev->eedata[2];
> -                             u8 data = 0xc4;
> -                             struct i2c_msg msg = {.addr = 0x08, .flags = 0, 
> .len = 1};
> -
> -                             if (dvb_attach(tda826x_attach, 
> fe0->dvb.frontend,
> -                                             0x60, &dev->i2c_adap, 0) == 
> NULL) {
> -                                     wprintk("%s: Medion Quadro, no tda826x "
> +                     }
> +                     if (dev_id != 0x08) {
> +                             /* we need to open the i2c gate (we know it 
> exists) */
> +                             dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 1);
> +                             if (dvb_attach(isl6405_attach, dvb_fe,
> +                                             &dev->i2c_adap, 0x08, 0, 0) == 
> NULL) {
> +                                     wprintk("%s: Medion Quadro, no ISL6405 "
>                                               "found !\n", __func__);
>                                       goto dettach_frontend;
>                               }
> -                             if (dev_id != 0x08) {
> -                                     /* we need to open the i2c gate (we 
> know it exists) */
> -                                     fe->ops.i2c_gate_ctrl(fe, 1);
> -                                     if (dvb_attach(isl6405_attach, fe,
> -                                                     &dev->i2c_adap, 0x08, 
> 0, 0) == NULL) {
> -                                             wprintk("%s: Medion Quadro, no 
> ISL6405 "
> -                                                     "found !\n", __func__);
> -                                             goto dettach_frontend;
> -                                     }
> -                                     if (dev_id == 0x07) {
> -                                             /* fire up the 2nd section of 
> the LNB supply since
> -                                                we can't do this from the 
> other section */
> -                                             msg.buf = &data;
> -                                             i2c_transfer(&dev->i2c_adap, 
> &msg, 1);
> -                                     }
> -                                     fe->ops.i2c_gate_ctrl(fe, 0);
> -                                     dev->original_set_voltage = 
> fe->ops.set_voltage;
> -                                     fe->ops.set_voltage = 
> md8800_set_voltage;
> -                                     dev->original_set_high_voltage = 
> fe->ops.enable_high_lnb_voltage;
> -                                     fe->ops.enable_high_lnb_voltage = 
> md8800_set_high_voltage;
> -                             } else {
> -                                     fe->ops.set_voltage = 
> md8800_set_voltage2;
> -                                     fe->ops.enable_high_lnb_voltage = 
> md8800_set_high_voltage2;
> +                             if (dev_id == 0x07) {
> +                                     /* fire up the 2nd section of the LNB 
> supply since
> +                                             we can't do this from the other 
> section */
> +                                     msg.buf = &data;
> +                                     i2c_transfer(&dev->i2c_adap, &msg, 1);
>                               }
> +                             dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 0);
> +                             dev->original_set_voltage = 
> dvb_fe->ops.set_voltage;
> +                             dvb_fe->ops.set_voltage = md8800_set_voltage;
> +                             dev->original_set_high_voltage = 
> dvb_fe->ops.enable_high_lnb_voltage;
> +                             dvb_fe->ops.enable_high_lnb_voltage = 
> md8800_set_high_voltage;
> +                     } else {
> +                             dvb_fe->ops.set_voltage = md8800_set_voltage2;
> +                             dvb_fe->ops.enable_high_lnb_voltage = 
> md8800_set_high_voltage2;
>                       }
>               }
>               break;
>       case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
> -             fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
> +             last_fe->dvb.frontend = dvb_attach(nxt200x_attach, 
> &avertvhda180,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend)
> -                     dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
> +             if (last_fe->dvb.frontend)
> +                     dvb_attach(dvb_pll_attach, last_fe->dvb.frontend, 0x61,
>                                  NULL, DVB_PLL_TDHU2);
>               break;
>       case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
>       case SAA7134_BOARD_KWORLD_ATSC110:
> -             fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
> +             last_fe->dvb.frontend = dvb_attach(nxt200x_attach, 
> &kworldatsc110,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend)
> -                     dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend)
> +                     dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x61,
>                                  TUNER_PHILIPS_TUV1236D);
>               break;
>       case SAA7134_BOARD_FLYDVBS_LR300:
> -             fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
> +             last_fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
> +             if (last_fe->dvb.frontend) {
> +                     if (dvb_attach(tda826x_attach, last_fe->dvb.frontend, 
> 0x60,
>                                      &dev->i2c_adap, 0) == NULL) {
>                               wprintk("%s: No tda826x found!\n", __func__);
>                               goto dettach_frontend;
>                       }
> -                     if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
> +                     if (dvb_attach(isl6421_attach, last_fe->dvb.frontend,
>                                      &dev->i2c_adap, 0x08, 0, 0) == NULL) {
>                               wprintk("%s: No ISL6421 found!\n", __func__);
>                               goto dettach_frontend;
> @@ -1356,72 +1404,72 @@ static int dvb_init(struct saa7134_dev *
>               }
>               break;
>       case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                                              &medion_cardbus,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dev->original_demod_sleep = 
> fe0->dvb.frontend->ops.sleep;
> -                     fe0->dvb.frontend->ops.sleep = 
> philips_europa_demod_sleep;
> +             if (last_fe->dvb.frontend) {
> +                     dev->original_demod_sleep = 
> last_fe->dvb.frontend->ops.sleep;
> +                     last_fe->dvb.frontend->ops.sleep = 
> philips_europa_demod_sleep;
> 
> -                     dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +                     dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, medion_cardbus.tuner_address,
>                                  TUNER_PHILIPS_FMD1216ME_MK3);
>               }
>               break;
>       case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
> -             fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>                               &philips_europa_config,
>                               &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     fe0->dvb.frontend->ops.tuner_ops.init = 
> philips_td1316_tuner_init;
> -                     fe0->dvb.frontend->ops.tuner_ops.set_params = 
> philips_td1316_tuner_set_params;
> +             if (last_fe->dvb.frontend) {
> +                     last_fe->dvb.frontend->ops.tuner_ops.init = 
> philips_td1316_tuner_init;
> +                     last_fe->dvb.frontend->ops.tuner_ops.set_params = 
> philips_td1316_tuner_set_params;
>               }
>               break;
>       case SAA7134_BOARD_CINERGY_HT_PCMCIA:
> -             if (configure_tda827x_fe(dev, &cinergy_ht_config,
> +             if (configure_tda827x_fe(dev, last_fe, &cinergy_ht_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_CINERGY_HT_PCI:
> -             if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
> +             if (configure_tda827x_fe(dev, last_fe, &cinergy_ht_pci_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_PHILIPS_TIGER_S:
> -             if (configure_tda827x_fe(dev, &philips_tiger_s_config,
> +             if (configure_tda827x_fe(dev, last_fe, &philips_tiger_s_config,
>                                        &tda827x_cfg_2) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_ASUS_P7131_4871:
> -             if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
> +             if (configure_tda827x_fe(dev, last_fe, &asus_p7131_4871_config,
>                                        &tda827x_cfg_2) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
> -             if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
> +             if (configure_tda827x_fe(dev, last_fe, 
> &asus_p7131_hybrid_lna_config,
>                                        &tda827x_cfg_2) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_AVERMEDIA_SUPER_007:
> -             if (configure_tda827x_fe(dev, &avermedia_super_007_config,
> +             if (configure_tda827x_fe(dev, last_fe, 
> &avermedia_super_007_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
> -             if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
> +             if (configure_tda827x_fe(dev, last_fe, 
> &twinhan_dtv_dvb_3056_config,
>                                        &tda827x_cfg_2_sw42) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_PHILIPS_SNAKE:
> -             fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
> +             last_fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
>                                               &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
> +             if (last_fe->dvb.frontend) {
> +                     if (dvb_attach(tda826x_attach, last_fe->dvb.frontend, 
> 0x60,
>                                       &dev->i2c_adap, 0) == NULL) {
>                               wprintk("%s: No tda826x found!\n", __func__);
>                               goto dettach_frontend;
>                       }
> -                     if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
> +                     if (dvb_attach(lnbp21_attach, last_fe->dvb.frontend,
>                                       &dev->i2c_adap, 0, 0) == NULL) {
>                               wprintk("%s: No lnbp21 found!\n", __func__);
>                               goto dettach_frontend;
> @@ -1429,12 +1477,12 @@ static int dvb_init(struct saa7134_dev *
>               }
>               break;
>       case SAA7134_BOARD_CREATIX_CTX953:
> -             if (configure_tda827x_fe(dev, &md8800_dvbt_config,
> +             if (configure_tda827x_fe(dev, last_fe, &md8800_dvbt_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
> -             if (configure_tda827x_fe(dev, &philips_tiger_s_config,
> +             if (configure_tda827x_fe(dev, last_fe, &philips_tiger_s_config,
>                                        &tda827x_cfg_2) < 0)
>                       goto dettach_frontend;
>               break;
> @@ -1443,7 +1491,7 @@ static int dvb_init(struct saa7134_dev *
>               saa7134_set_gpio(dev, 25, 0);
>               msleep(10);
>               saa7134_set_gpio(dev, 25, 1);
> -             fe0->dvb.frontend = dvb_attach(mt352_attach,
> +             last_fe->dvb.frontend = dvb_attach(mt352_attach,
>                                               &avermedia_xc3028_mt352_dev,
>                                               &dev->i2c_adap);
>               attach_xc3028 = 1;
> @@ -1453,18 +1501,18 @@ static int dvb_init(struct saa7134_dev *
>       case SAA7134_BOARD_VIDEOMATE_T750:
>  #endif
>       case SAA7134_BOARD_MD7134_BRIDGE_2:
> -             fe0->dvb.frontend = dvb_attach(tda10086_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10086_attach,
>                                               &sd1878_4m, &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> +             if (last_fe->dvb.frontend) {
>                       struct dvb_frontend *fe;
> -                     if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
> +                     if (dvb_attach(dvb_pll_attach, last_fe->dvb.frontend, 
> 0x60,
>                                 &dev->i2c_adap, 
> DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
>                               wprintk("%s: MD7134 DVB-S, no SD1878 "
>                                       "found !\n", __func__);
>                               goto dettach_frontend;
>                       }
>                       /* we need to open the i2c gate (we know it exists) */
> -                     fe = fe0->dvb.frontend;
> +                     fe = last_fe->dvb.frontend;
>                       fe->ops.i2c_gate_ctrl(fe, 1);
>                       if (dvb_attach(isl6405_attach, fe,
>                                       &dev->i2c_adap, 0x08, 0, 0) == NULL) {
> @@ -1483,67 +1531,70 @@ static int dvb_init(struct saa7134_dev *
>               saa7134_set_gpio(dev, 25, 0);
>               msleep(10);
>               saa7134_set_gpio(dev, 25, 1);
> -             fe0->dvb.frontend = dvb_attach(mt352_attach,
> +             last_fe->dvb.frontend = dvb_attach(mt352_attach,
>                                               &avermedia_xc3028_mt352_dev,
>                                               &dev->i2c_adap);
>               attach_xc3028 = 1;
>               break;
>       case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
> -             if (!use_frontend) {     /* terrestrial */
> -                     if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
> -                                                     &tda827x_cfg_2) < 0)
> +             /* terrestrial */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +             if (configure_tda827x_fe(dev, fe, &asus_tiger_3in1_config,
> +                                             &tda827x_cfg_2) < 0)
> +                     goto dettach_frontend;
> +
> +             /* satellite */
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +             fe->dvb.frontend = dvb_attach(tda10086_attach,
> +                                     &flydvbs, &dev->i2c_adap);
> +             if (fe->dvb.frontend) {
> +                     fe->dvb.frontend->id = 1;
> +                     if (dvb_attach(tda826x_attach,
> +                                     fe->dvb.frontend, 0x60,
> +                                     &dev->i2c_adap, 0) == NULL) {
> +                             wprintk("%s: Asus Tiger 3in1, no "
> +                                     "tda826x found!\n", __func__);
> +                             goto dettach_frontend;
> +                     }
> +                     if (dvb_attach(lnbp21_attach, fe->dvb.frontend,
> +                                     &dev->i2c_adap, 0, 0) == NULL) {
> +                             wprintk("%s: Asus Tiger 3in1, no lnbp21"
> +                                     " found!\n", __func__);
>                               goto dettach_frontend;
> -             } else {                /* satellite */
> -                     fe0->dvb.frontend = dvb_attach(tda10086_attach,
> -                                             &flydvbs, &dev->i2c_adap);
> -                     if (fe0->dvb.frontend) {
> -                             if (dvb_attach(tda826x_attach,
> -                                             fe0->dvb.frontend, 0x60,
> -                                             &dev->i2c_adap, 0) == NULL) {
> -                                     wprintk("%s: Asus Tiger 3in1, no "
> -                                             "tda826x found!\n", __func__);
> -                                     goto dettach_frontend;
> -                             }
> -                             if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
> -                                             &dev->i2c_adap, 0, 0) == NULL) {
> -                                     wprintk("%s: Asus Tiger 3in1, no lnbp21"
> -                                             " found!\n", __func__);
> -                                     goto dettach_frontend;
> -                             }
>                       }
>               }
>               break;
>       case SAA7134_BOARD_ASUSTeK_TIGER:
> -             if (configure_tda827x_fe(dev, &philips_tiger_config,
> +             if (configure_tda827x_fe(dev, last_fe, &philips_tiger_config,
>                                        &tda827x_cfg_0) < 0)
>                       goto dettach_frontend;
>               break;
>       case SAA7134_BOARD_BEHOLD_H6:
> -             fe0->dvb.frontend = dvb_attach(zl10353_attach,
> +             last_fe->dvb.frontend = dvb_attach(zl10353_attach,
>                                               &behold_h6_config,
>                                               &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x61,
>                                  TUNER_PHILIPS_FMD1216MEX_MK3);
>               }
>               break;
>       case SAA7134_BOARD_BEHOLD_X7:
> -             fe0->dvb.frontend = dvb_attach(zl10353_attach,
> +             last_fe->dvb.frontend = dvb_attach(zl10353_attach,
>                                               &behold_x7_config,
>                                               &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     dvb_attach(xc5000_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     dvb_attach(xc5000_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, &behold_x7_tunerconfig);
>               }
>               break;
>       case SAA7134_BOARD_AVERMEDIA_A700_PRO:
>       case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
>               /* Zarlink ZL10313 */
> -             fe0->dvb.frontend = dvb_attach(mt312_attach,
> +             last_fe->dvb.frontend = dvb_attach(mt312_attach,
>                       &avertv_a700_mt312, &dev->i2c_adap);
> -             if (fe0->dvb.frontend) {
> -                     if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend) {
> +                     if (dvb_attach(zl10036_attach, last_fe->dvb.frontend,
>                                       &avertv_a700_tuner, &dev->i2c_adap) == 
> NULL) {
>                               wprintk("%s: No zl10036 found!\n",
>                                       __func__);
> @@ -1551,37 +1602,37 @@ static int dvb_init(struct saa7134_dev *
>               }
>               break;
>       case SAA7134_BOARD_VIDEOMATE_S350:
> -             fe0->dvb.frontend = dvb_attach(mt312_attach,
> +             last_fe->dvb.frontend = dvb_attach(mt312_attach,
>                               &zl10313_compro_s350_config, &dev->i2c_adap);
> -             if (fe0->dvb.frontend)
> -                     if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend)
> +                     if (dvb_attach(zl10039_attach, last_fe->dvb.frontend,
>                                       0x60, &dev->i2c_adap) == NULL)
>                               wprintk("%s: No zl10039 found!\n",
>                                       __func__);
> 
>               break;
>       case SAA7134_BOARD_ZOLID_HYBRID_PCI:
> -             fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>                                              &zolid_tda10048_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend != NULL) {
> -                     dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend != NULL) {
> +                     dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x4b,
>                                  &tda829x_no_probe);
> -                     dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +                     dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>                                  0x60, &dev->i2c_adap,
>                                  &zolid_tda18271_config);
>               }
>               break;
>       case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
> -             fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +             last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>                                              &dtv1000s_tda10048_config,
>                                              &dev->i2c_adap);
> -             if (fe0->dvb.frontend != NULL) {
> -                     dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +             if (last_fe->dvb.frontend != NULL) {
> +                     dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>                                  &dev->i2c_adap, 0x4b,
>                                  &tda829x_no_probe);
> -                     dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +                     dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>                                  0x60, &dev->i2c_adap,
>                                  &dtv1000s_tda18271_config);
>               }
> @@ -1598,10 +1649,10 @@ static int dvb_init(struct saa7134_dev *
>                       .i2c_addr  = 0x61,
>               };
> 
> -             if (!fe0->dvb.frontend)
> +             if (!last_fe->dvb.frontend)
>                       goto dettach_frontend;
> 
> -             fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
> +             fe = dvb_attach(xc2028_attach, last_fe->dvb.frontend, &cfg);
>               if (!fe) {
>                       printk(KERN_ERR "%s/2: xc3028 attach failed\n",
>                              dev->name);
> @@ -1609,27 +1660,40 @@ static int dvb_init(struct saa7134_dev *
>               }
>       }
> 
> -     if (NULL == fe0->dvb.frontend) {
> -             printk(KERN_ERR "%s/dvb: frontend initialization failed\n", 
> dev->name);
> -             goto dettach_frontend;
> +     for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +             if ((!fe) || (NULL == fe->dvb.frontend)){
> +                     printk(KERN_ERR "%s/dvb: frontend %d initialization 
> failed\n", dev->name, i);
> +                     goto dettach_frontend;
> +             }
> +
> +             /* define general-purpose callback pointer */
> +             fe->dvb.frontend->callback = saa7134_tuner_callback;
> +
> +             /* override bus control override */
> +             fe->dvb.frontend->ops.ts_bus_ctrl = saa7134_dvb_bus_ctrl;
>       }
> -     /* define general-purpose callback pointer */
> -     fe0->dvb.frontend->callback = saa7134_tuner_callback;
> 
>       /* register everything else */
>       ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
>                                       &dev->pci->dev, adapter_nr, 0, NULL);
> +     if (ret) {
> +             printk(KERN_ERR "%s/dvb: register frontend(s) failed\n", 
> dev->name);
> +             goto dettach_frontend;
> +     }
> 
> -     /* this sequence is necessary to make the tda1004x load its firmware
> -      * and to enter analog mode of hybrid boards
> -      */
> -     if (!ret) {
> -             if (fe0->dvb.frontend->ops.init)
> -                     fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
> -             if (fe0->dvb.frontend->ops.sleep)
> -                     fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
> -             if (fe0->dvb.frontend->ops.tuner_ops.sleep)
> -                     
> fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
> +     for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +
> +             /* this sequence is necessary to make the tda1004x load its 
> firmware
> +             * and to enter analog mode of hybrid boards
> +             */
> +             if (fe->dvb.frontend->ops.init)
> +                     fe->dvb.frontend->ops.init(fe->dvb.frontend);
> +             if (fe->dvb.frontend->ops.sleep)
> +                     fe->dvb.frontend->ops.sleep(fe->dvb.frontend);
> +             if (fe->dvb.frontend->ops.tuner_ops.sleep)
> +                     fe->dvb.frontend->ops.tuner_ops.sleep(fe->dvb.frontend);
>       }
>       return ret;
> 
> @@ -1640,37 +1704,41 @@ dettach_frontend:
> 
>  static int dvb_fini(struct saa7134_dev *dev)
>  {
> -     struct videobuf_dvb_frontend *fe0;
> -
> -     /* Get the first frontend */
> -     fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
> -     if (!fe0)
> -             return -EINVAL;
> +     int i;
> +     struct videobuf_dvb_frontend *fe;
> 
> -     /* FIXME: I suspect that this code is bogus, since the entry for
> -        Pinnacle 300I DVB-T PAL already defines the proper init to allow
> -        the detection of mt2032 (TDA9887_PORT2_INACTIVE)
> -      */
> -     if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
> -             struct v4l2_priv_tun_config tda9887_cfg;
> -             static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
> -
> -             tda9887_cfg.tuner = TUNER_TDA9887;
> -             tda9887_cfg.priv  = &on;
> -
> -             /* otherwise we don't detect the tuner on next insmod */
> -             saa_call_all(dev, tuner, s_config, &tda9887_cfg);
> -     } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
> -             if ((dev->eedata[2] == 0x07) && use_frontend) {
> -                     /* turn off the 2nd lnb supply */
> -                     u8 data = 0x80;
> -                     struct i2c_msg msg = {.addr = 0x08, .buf = &data, 
> .flags = 0, .len = 1};
> -                     struct dvb_frontend *fe;
> -                     fe = fe0->dvb.frontend;
> -                     if (fe->ops.i2c_gate_ctrl) {
> -                             fe->ops.i2c_gate_ctrl(fe, 1);
> -                             i2c_transfer(&dev->i2c_adap, &msg, 1);
> -                             fe->ops.i2c_gate_ctrl(fe, 0);
> +     for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +             fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +             if (!fe){
> +                     printk(KERN_ERR "%s() failed to get frontend(%d)\n", 
> __func__, i);
> +                     continue;
> +             }
> +
> +             /* FIXME: I suspect that this code is bogus, since the entry for
> +             Pinnacle 300I DVB-T PAL already defines the proper init to allow
> +             the detection of mt2032 (TDA9887_PORT2_INACTIVE)
> +             */
> +             if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
> +                     struct v4l2_priv_tun_config tda9887_cfg;
> +                     static int on  = TDA9887_PRESENT | 
> TDA9887_PORT2_INACTIVE;
> +
> +                     tda9887_cfg.tuner = TUNER_TDA9887;
> +                     tda9887_cfg.priv  = &on;
> +
> +                     /* otherwise we don't detect the tuner on next insmod */
> +                     saa_call_all(dev, tuner, s_config, &tda9887_cfg);
> +             } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
> +                     if ((dev->eedata[2] == 0x07) && (fe->id == 2)) {
> +                             /* turn off the 2nd lnb supply */
> +                             u8 data = 0x80;
> +                             struct i2c_msg msg = {.addr = 0x08, .buf = 
> &data, .flags = 0, .len = 1};
> +                             struct dvb_frontend *dvb_fe;
> +                             dvb_fe = fe->dvb.frontend;
> +                             if (dvb_fe->ops.i2c_gate_ctrl) {
> +                                     dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 1);
> +                                     i2c_transfer(&dev->i2c_adap, &msg, 1);
> +                                     dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 0);
> +                             }
>                       }
>               }
>       }
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134.h 
> ./linux/drivers/media/video/saa7134/saa7134.h
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134.h        
> 2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134.h     2009-10-31 
> 17:22:48.000000000 +0100
> @@ -359,6 +359,7 @@ struct saa7134_board {
>       unsigned int            tuner_config;
> 
>       /* peripheral I/O */
> +     unsigned char           num_frontends;
>       enum saa7134_video_out  video_out;
>       enum saa7134_mpeg_type  mpeg;
>       enum saa7134_mpeg_ts_type ts_type;

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to