On 25/04/17 11:45, Mauro Carvalho Chehab wrote:
> devm_gpiod_get_optional() can return -ENOSYS if GPIOLIB is
> disabled, causing probe to fail. Warn the user if this
> happens.
> 
> Acked-by: Sakari Ailus <sakari.ai...@linux.intel.com>
> Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>

Acked-by: Hans Verkuil <hans.verk...@cisco.com>

Thanks!

Regards,

        Hans

> ---
>  drivers/media/i2c/ov2640.c | 30 ++++++++++++++++++++++--------
>  1 file changed, 22 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
> index 4a2ae24f8722..e6d0c1f64f0b 100644
> --- a/drivers/media/i2c/ov2640.c
> +++ b/drivers/media/i2c/ov2640.c
> @@ -765,17 +765,17 @@ static int ov2640_s_register(struct v4l2_subdev *sd,
>  
>  static int ov2640_s_power(struct v4l2_subdev *sd, int on)
>  {
> -     struct i2c_client *client = v4l2_get_subdevdata(sd);
> -     struct ov2640_priv *priv = to_ov2640(client);
> -
>  #ifdef CONFIG_GPIOLIB
> +     struct i2c_client *client = v4l2_get_subdevdata(sd);
> +     struct ov2640_priv *priv = to_ov2640(client);
> +
>       if (priv->pwdn_gpio)
>               gpiod_direction_output(priv->pwdn_gpio, !on);
>       if (on && priv->resetb_gpio) {
>               /* Active the resetb pin to perform a reset pulse */
>               gpiod_direction_output(priv->resetb_gpio, 1);
>               usleep_range(3000, 5000);
> -             gpiod_direction_output(priv->resetb_gpio, 0);
> +             gpiod_set_value(priv->resetb_gpio, 0);
>       }
>  #endif
>       return 0;
> @@ -1048,21 +1048,35 @@ static const struct v4l2_subdev_ops ov2640_subdev_ops 
> = {
>  static int ov2640_probe_dt(struct i2c_client *client,
>               struct ov2640_priv *priv)
>  {
> +     int ret;
> +
>       /* Request the reset GPIO deasserted */
>       priv->resetb_gpio = devm_gpiod_get_optional(&client->dev, "resetb",
>                       GPIOD_OUT_LOW);
> +
>       if (!priv->resetb_gpio)
>               dev_dbg(&client->dev, "resetb gpio is not assigned!\n");
> -     else if (IS_ERR(priv->resetb_gpio))
> -             return PTR_ERR(priv->resetb_gpio);
> +
> +     ret = PTR_ERR_OR_ZERO(priv->resetb_gpio);
> +     if (ret && ret != -ENOSYS) {
> +             dev_dbg(&client->dev,
> +                     "Error %d while getting resetb gpio\n", ret);
> +             return ret;
> +     }
>  
>       /* Request the power down GPIO asserted */
>       priv->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "pwdn",
>                       GPIOD_OUT_HIGH);
> +
>       if (!priv->pwdn_gpio)
>               dev_dbg(&client->dev, "pwdn gpio is not assigned!\n");
> -     else if (IS_ERR(priv->pwdn_gpio))
> -             return PTR_ERR(priv->pwdn_gpio);
> +
> +     ret = PTR_ERR_OR_ZERO(priv->pwdn_gpio);
> +     if (ret && ret != -ENOSYS) {
> +             dev_dbg(&client->dev,
> +                     "Error %d while getting pwdn gpio\n", ret);
> +             return ret;
> +     }
>  
>       return 0;
>  }
> 

Reply via email to