Hi, Tomasz,

Thanks for your code review, still need more time to study and test the 
solution for the rest of comments, going forward, I will respond to your review 
first before submitting new version.

Thanks,

Yong  

> -----Original Message-----
> From: [email protected] [mailto:linux-media-
> [email protected]] On Behalf Of Tomasz Figa
> Sent: Tuesday, June 13, 2017 5:01 PM
> To: Zhi, Yong <[email protected]>
> Cc: [email protected]; Sakari Ailus <[email protected]>;
> Zheng, Jian Xu <[email protected]>; Mani, Rajmohan
> <[email protected]>; Toivonen, Tuukka
> <[email protected]>; Yang, Hyungwoo
> <[email protected]>; Mohandass, Divagar
> <[email protected]>
> Subject: Re: [PATCH 3/3] intel-ipu3: cio2: Add new MIPI-CSI2 driver
> 
> Hi Yong,
> 
> On Wed, Jun 14, 2017 at 5:17 AM, Yong Zhi <[email protected]> wrote:
> > This patch adds CIO2 CSI-2 device driver for Intel's IPU3 camera
> > sub-system support.
> >
> > Signed-off-by: Yong Zhi <[email protected]>
> > ---
> >  drivers/media/pci/Kconfig                |    2 +
> >  drivers/media/pci/Makefile               |    3 +-
> >  drivers/media/pci/intel/Makefile         |    5 +
> >  drivers/media/pci/intel/ipu3/Kconfig     |   17 +
> >  drivers/media/pci/intel/ipu3/Makefile    |    1 +
> >  drivers/media/pci/intel/ipu3/ipu3-cio2.c | 1779
> > ++++++++++++++++++++++++++++++
> > drivers/media/pci/intel/ipu3/ipu3-cio2.h |  434 ++++++++
> >  7 files changed, 2240 insertions(+), 1 deletion(-)  create mode
> > 100644 drivers/media/pci/intel/Makefile  create mode 100644
> > drivers/media/pci/intel/ipu3/Kconfig
> >  create mode 100644 drivers/media/pci/intel/ipu3/Makefile
> >  create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.c
> >  create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.h
> >
> 
> I quickly checked the code and it doesn't seem to have most of my comments
> from v2 addressed. It's not a very good practice to send new version without
> addressing or at least replying to all the comments - it's the best way to 
> lose
> track of necessary changes. Please make sure that all the comments are
> taken care of.
> 
> Best regards,
> Tomasz

Reply via email to