From: Márton Németh <nm...@freemail.hu>

Add debug register write interface to pac7302 to be able to set
for example the edge detect mode (bit 2 register 0x55) or the
test pattern (bit 0..3, register 0x72) and test overlay (bit 4,
register 0x72) from the user space. Only write of register
page 0 is supported by this patch.

The patch was tested together with Labtec Webcam 2200 (USB ID
093a:2626).

Signed-off-by: Márton Németh <nm...@freemail.hu>
---
This patch replaces http://linuxtv.org/hg/~jfrancois/v4l-dvb/rev/da22d3ea5fc7 
and
http://linuxtv.org/hg/~jfrancois/v4l-dvb/rev/9b3580f8fee8 .
---
diff -upr b/linux/drivers/media/video/gspca/pac7302.c 
c/linux/drivers/media/video/gspca/pac7302.c
--- b/linux/drivers/media/video/gspca/pac7302.c 2009-11-08 11:39:00.000000000 
+0100
+++ c/linux/drivers/media/video/gspca/pac7302.c 2009-11-08 11:59:00.000000000 
+0100
@@ -53,6 +53,7 @@

 #define MODULE_NAME "pac7302"

+#include <media/v4l2-chip-ident.h>
 #include "gspca.h"

 MODULE_AUTHOR("Thomas Kaiser tho...@kaiser-linux.li");
@@ -982,6 +983,55 @@ static int sd_getvflip(struct gspca_dev
        return 0;
 }

+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+                       struct v4l2_dbg_register *reg)
+{
+       int ret = -EINVAL;
+       __u8 index;
+       __u8 value;
+
+       /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit
+                              long on the USB bus)
+       */
+       if (reg->match.type == V4L2_CHIP_MATCH_HOST &&
+           reg->match.addr == 0 &&
+           (reg->reg < 0x000000ff) &&
+           (reg->val <= 0x000000ff)
+       ) {
+               /* Currently writing to page 0 is only supported. */
+               /* reg_w() only supports 8bit index */
+               index = reg->reg & 0x000000ff;
+               value = reg->val & 0x000000ff;
+
+               /* Note that there shall be no access to other page
+                  by any other function between the page swith and
+                  the actual register write */
+               ret = reg_w(gspca_dev, 0xff, 0x00);     /* page 0 */
+               if (0 <= ret)
+                       ret = reg_w(gspca_dev, index, value);
+
+               if (0 <= ret)
+                       ret = reg_w(gspca_dev, 0xdc, 0x01);
+       }
+       return ret;
+}
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+                       struct v4l2_dbg_chip_ident *chip)
+{
+       int ret = -EINVAL;
+
+       if (chip->match.type == V4L2_CHIP_MATCH_HOST &&
+           chip->match.addr == 0) {
+               chip->revision = 0;
+               chip->ident = V4L2_IDENT_UNKNOWN;
+               ret = 0;
+       }
+       return ret;
+}
+#endif
+
 /* sub-driver description for pac7302 */
 static struct sd_desc sd_desc = {
        .name = MODULE_NAME,
@@ -994,6 +1044,10 @@ static struct sd_desc sd_desc = {
        .stop0 = sd_stop0,
        .pkt_scan = sd_pkt_scan,
        .dq_callback = do_autogain,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+       .set_register = sd_dbg_s_register,
+       .get_chip_ident = sd_chip_ident,
+#endif
 };

 /* -- module initialisation -- */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to