On Tuesday 10 November 2009 20:21:37 Pete Eberlein wrote:
> From: Pete Eberlein <p...@sensoray.com>
>
> The s2250-board i2c module was converted to use v4l2-i2c-drv.h in
> preparation for its subdev conversion. This change prevented the
> s2250-loader from being initialized within the same module due to
> the module_init and module_exit function definitions in v4l2-i2c-drv.h.
FYI: the v4l2-i2c-drv.h header is only needed if you have to support
kernels < 2.6.26. If that is not the case, then the i2c driver can be
written as a regular i2c driver. See for example this driver:
linux/drivers/media/video/tvp514x.c.
However, I seem to remember that you told me that this driver is actually
used on pre-2.6.26 kernels, so then you have no choice but to use it.
> Therefore, s2250-loader is now its own module, and the header for
> exporting s2250-loader functions is no longer needed.
>
> The s2250 i2c module name was "2220-board" in some places, and was
> changed to "s2250".
Looks good.
Signed-off-by: Hans Verkuil <hverk...@xs4all.nl>
Regards,
Hans
>
> Priority: normal
>
> Signed-off-by: Pete Eberlein <p...@sensoray.com>
>
> diff -r 99e4a0cf6788 -r 5fe2031944d4 linux/drivers/staging/go7007/Makefile
> --- a/linux/drivers/staging/go7007/Makefile Tue Nov 10 10:47:34 2009 -0800
> +++ b/linux/drivers/staging/go7007/Makefile Tue Nov 10 10:54:51 2009 -0800
> @@ -5,7 +5,7 @@
>
> obj-$(CONFIG_VIDEO_GO7007) += go7007.o
> obj-$(CONFIG_VIDEO_GO7007_USB) += go7007-usb.o
> -obj-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD) += s2250.o
> +obj-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD) += s2250.o s2250-loader.o
> obj-$(CONFIG_VIDEO_GO7007_SAA7113) += wis-saa7113.o
> obj-$(CONFIG_VIDEO_GO7007_OV7640) += wis-ov7640.o
> obj-$(CONFIG_VIDEO_GO7007_SAA7115) += wis-saa7115.o
> @@ -17,7 +17,7 @@
> go7007-objs += go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o \
> snd-go7007.o
>
> -s2250-objs += s2250-board.o s2250-loader.o
> +s2250-objs += s2250-board.o
>
> # Uncomment when the saa7134 patches get into upstream
> #ifneq ($(CONFIG_VIDEO_SAA7134),)
> diff -r 99e4a0cf6788 -r 5fe2031944d4
> linux/drivers/staging/go7007/go7007-driver.c
> --- a/linux/drivers/staging/go7007/go7007-driver.c Tue Nov 10 10:47:34
> 2009 -0800
> +++ b/linux/drivers/staging/go7007/go7007-driver.c Tue Nov 10 10:54:51
> 2009 -0800
> @@ -219,7 +219,7 @@
> modname = "wis-ov7640";
> break;
> case I2C_DRIVERID_S2250:
> - modname = "s2250-board";
> + modname = "s2250";
> break;
> default:
> modname = NULL;
> diff -r 99e4a0cf6788 -r 5fe2031944d4 linux/drivers/staging/go7007/go7007-usb.c
> --- a/linux/drivers/staging/go7007/go7007-usb.c Tue Nov 10 10:47:34
> 2009 -0800
> +++ b/linux/drivers/staging/go7007/go7007-usb.c Tue Nov 10 10:54:51
> 2009 -0800
> @@ -425,7 +425,7 @@
> .num_i2c_devs = 1,
> .i2c_devs = {
> {
> - .type = "s2250_board",
> + .type = "s2250",
> .id = I2C_DRIVERID_S2250,
> .addr = 0x43,
> },
> diff -r 99e4a0cf6788 -r 5fe2031944d4
> linux/drivers/staging/go7007/s2250-board.c
> --- a/linux/drivers/staging/go7007/s2250-board.c Tue Nov 10 10:47:34
> 2009 -0800
> +++ b/linux/drivers/staging/go7007/s2250-board.c Tue Nov 10 10:54:51
> 2009 -0800
> @@ -20,10 +20,13 @@
> #include <linux/usb.h>
> #include <linux/i2c.h>
> #include <linux/videodev2.h>
> +#include <media/v4l2-device.h>
> #include <media/v4l2-common.h>
> -#include "s2250-loader.h"
> +#include <media/v4l2-i2c-drv.h>
> #include "go7007-priv.h"
> -#include "wis-i2c.h"
> +
> +MODULE_DESCRIPTION("Sensoray 2250/2251 i2c v4l2 subdev driver");
> +MODULE_LICENSE("GPL v2");
>
> #define TLV320_ADDRESS 0x34
> #define VPX322_ADDR_ANALOGCONTROL1 0x02
> @@ -575,7 +578,7 @@
> dec->audio = audio;
> i2c_set_clientdata(client, dec);
>
> - printk(KERN_DEBUG
> + printk(KERN_INFO
> "s2250: initializing video decoder on %s\n",
> adapter->name);
>
> @@ -648,46 +651,20 @@
> return 0;
> }
>
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
> static struct i2c_device_id s2250_id[] = {
> - { "s2250_board", 0 },
> + { "s2250", 0 },
> { }
> };
> +MODULE_DEVICE_TABLE(i2c, s2250_id);
>
> -static struct i2c_driver s2250_driver = {
> - .driver = {
> - .name = "Sensoray 2250 board driver",
> - },
> - .probe = s2250_probe,
> - .remove = s2250_remove,
> - .command = s2250_command,
> - .id_table = s2250_id,
> +#endif
> +static struct v4l2_i2c_driver_data v4l2_i2c_data = {
> + .name = "s2250",
> + .probe = s2250_probe,
> + .remove = s2250_remove,
> + .command = s2250_command,
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
> + .id_table = s2250_id,
> +#endif
> };
> -
> -static int __init s2250_init(void)
> -{
> - int r;
> -
> - r = s2250loader_init();
> - if (r < 0)
> - return r;
> -
> - r = i2c_add_driver(&s2250_driver);
> - if (r < 0)
> - s2250loader_cleanup();
> -
> - return r;
> -}
> -
> -static void __exit s2250_cleanup(void)
> -{
> - i2c_del_driver(&s2250_driver);
> -
> - s2250loader_cleanup();
> -}
> -
> -module_init(s2250_init);
> -module_exit(s2250_cleanup);
> -
> -MODULE_AUTHOR("");
> -MODULE_DESCRIPTION("Board driver for Sensoryray 2250");
> -MODULE_LICENSE("GPL v2");
> diff -r 99e4a0cf6788 -r 5fe2031944d4
> linux/drivers/staging/go7007/s2250-loader.c
> --- a/linux/drivers/staging/go7007/s2250-loader.c Tue Nov 10 10:47:34
> 2009 -0800
> +++ b/linux/drivers/staging/go7007/s2250-loader.c Tue Nov 10 10:54:51
> 2009 -0800
> @@ -162,7 +162,7 @@
> .id_table = s2250loader_ids,
> };
>
> -int s2250loader_init(void)
> +static int __init s2250loader_init(void)
> {
> int r;
> unsigned i = 0;
> @@ -179,11 +179,15 @@
> printk(KERN_INFO "s2250loader_init: driver registered\n");
> return 0;
> }
> -EXPORT_SYMBOL(s2250loader_init);
> +module_init(s2250loader_init);
>
> -void s2250loader_cleanup(void)
> +static void __exit s2250loader_cleanup(void)
> {
> printk(KERN_INFO "s2250loader_cleanup\n");
> usb_deregister(&s2250loader_driver);
> }
> -EXPORT_SYMBOL(s2250loader_cleanup);
> +module_exit(s2250loader_cleanup);
> +
> +MODULE_AUTHOR("");
> +MODULE_DESCRIPTION("firmware loader for Sensoray 2250/2251");
> +MODULE_LICENSE("GPL v2");
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
