On Mon, Nov 16, 2009 at 3:49 PM, andrea.amoros...@gmail.com <andrea.amoros...@gmail.com> wrote: > The usb is the following: > Bus 002 Device 010: ID eb1a:e312 eMPIA Technology, Inc. > (I don't remember what it was previously, but it seems wrong how can I be > sure about that?). > I have put back the driver to the original state, but still it doesn't work. > Did I have to reprogram the eprom? If so, it is possible via usb? > Thank you, > Andrea > > PS I've found an old dmesg. > The USB ID is wrong! The old one was eb1a:e323
Ok, so that confirms that indeed the eeprom was corrupted. I would suggest you hack the USB_DEVICE() entry in em28xx-cards.c to be eb1a:e312. This will allow the driver to load and the i2c device to be setup. Then use the eeprom repair script to rewrite the eeprom. At that point you should be able to remove the hack, because the USB ID will be back to eb1a:e323. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
