On Tue, 17 Nov 2009, Antonio Ospite wrote:

> pxa_camera init() is going to be removed.
> Configure PXA CIF pins directly in machine init function.

Same comment as to patch 1/3.

> 
> Signed-off-by: Antonio Ospite <osp...@studenti.unina.it>

Even though the change seems obvious, it better be tested - in case 
someone reconfigures camera pins somewhere after 
pcm990_baseboard_init()... Juergen, would you be able to test it?

Thanks
Guennadi

> ---
>  arch/arm/mach-pxa/pcm990-baseboard.c |    8 +-------
>  1 files changed, 1 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c 
> b/arch/arm/mach-pxa/pcm990-baseboard.c
> index bbda570..d5255ae 100644
> --- a/arch/arm/mach-pxa/pcm990-baseboard.c
> +++ b/arch/arm/mach-pxa/pcm990-baseboard.c
> @@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
>       GPIO44_CIF_LV,
>  };
>  
> -static int pcm990_pxacamera_init(struct device *dev)
> -{
> -     pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
> -     return 0;
> -}
> -
>  /*
>   * CICR4: PCLK_EN:   Pixel clock is supplied by the sensor
>   *   MCLK_EN:        Master clock is generated by PXA
>   *   PCP:            Data sampled on the falling edge of pixel clock
>   */
>  struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
> -     .init   = pcm990_pxacamera_init,
>       .flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | 
> PXA_CAMERA_DATAWIDTH_10 |
>               PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
>       .mclk_10khz = 1000,
> @@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
>       pxa_set_ac97_info(NULL);
>  
>  #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
> +     pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
>       pxa_set_camera_info(&pcm990_pxacamera_platform_data);
>  
>       i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
> -- 
> 1.6.5.2
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to