I have an unusual problem with this tuner. On my workstation (f26) it works
fine and I can watch
TV using vlc or tune with tzap.
On my mythtv server (which was recently upgraded to f26) the card does not
work. An adapter is not created
in /dev/dvb.
The server has a few other tuners and it may be some interference causing the
failure, but the reason
is beyond me.
This is what is loaded after the tuner is plugged in:
$ sudo lsmod|grep dvb
dvb_usb_dib0700 151552 0
dib7000m 24576 1 dvb_usb_dib0700
dib0090 40960 1 dvb_usb_dib0700
dib0070 20480 1 dvb_usb_dib0700
dib3000mc 20480 1 dvb_usb_dib0700
dibx000_common 16384 4 dib7000p,dvb_usb_dib0700,dib7000m,dib3000mc
dvb_usb 24576 1 dvb_usb_dib0700
dvb_usb_af9035 40960 0
dvb_usb_rtl28xxu 40960 0
dvb_usb_v2 40960 2 dvb_usb_af9035,dvb_usb_rtl28xxu
dvb_core 126976 5 dib7000p,dvb_usb,dvb_usb_v2,rtl2832,af9033
rc_core 36864 16
dvb_usb_af9035,ir_nec_decoder,dvb_usb_dib0700,ir_lirc_codec,dvb_usb,lirc_dev,dvb_usb_v2,nuvoton_cir,dvb_usb_rtl28xxu,rc_leadtek_y04g0051
This is the failure on the server:
kernel: usb 8-2: new high-speed USB device number 3 using xhci_hcd
kernel: usb 8-2: New USB device found, idVendor=2040, idProduct=9580
kernel: usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 8-2: Product: NovaT 500Stick
kernel: usb 8-2: Manufacturer: Hauppauge
kernel: usb 8-2: SerialNumber: 4027868935
mtp-probe[19770]: checking bus 8, device 3:
"/sys/devices/pci0000:00/0000:00:14.0/usb8/8-2"
mtp-probe[19770]: bus: 8, device: 3 was not an MTP device
kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in
cold state, will try to load a firmware
kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
kernel: dib0700: firmware started successfully.
kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in
warm state.
kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
kernel: dvbdev: DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato
Eye-TV Diversity)
baloo_file[2975]: QObject::connect: invalid null parameter
baloo_file[2975]: QObject::connect: invalid null parameter
baloo_file[2975]: QObject::connect: invalid null parameter
kernel: usb 8-2: DVB: registering adapter 7 frontend 0 (DiBcom 7000PC)...
### note: /dev/dvb/adapter7 was present for about 1 second and then
disappeared
baloo_file[2975]: QObject::connect: invalid null parameter
kernel: MT2266: successfully identified
kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
kernel: dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity error while
loading driver (-23)
kernel: usbcore: registered new interface driver dvb_usb_dib0700
For comparo, here is a successful result on the workstation:
kernel: usb 2-3: new high-speed USB device number 3 using ehci-pci
kernel: usb 2-3: New USB device found, idVendor=2040, idProduct=9580
kernel: usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 2-3: Product: NovaT 500Stick
kernel: usb 2-3: Manufacturer: Hauppauge
kernel: usb 2-3: SerialNumber: 4027868935
mtp-probe[17719]: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3"
mtp-probe[17719]: bus: 2, device: 3 was not an MTP device
kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in
cold state, will try to load a firmware
kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
kernel: dib0700: firmware started successfully.
kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in
warm state.
kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
kernel: dvbdev: DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato
Eye-TV Diversity)
baloo_file[2874]: QObject::connect: invalid null parameter
baloo_file[2874]: QObject::connect: invalid null parameter
baloo_file[2874]: QObject::connect: invalid null parameter
kernel: usb 2-3: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
baloo_file[2874]: QObject::connect: invalid null parameter
kernel: MT2266: successfully identified
kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
kernel: dvbdev: DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato
Eye-TV Diversity)
baloo_file[2874]: QObject::connect: invalid null parameter
baloo_file[2874]: QObject::connect: invalid null parameter
baloo_file[2874]: QObject::connect: invalid null parameter
kernel: usb 2-3: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
baloo_file[2874]: QObject::connect: invalid null parameter
kernel: MT2266: successfully identified
kernel: rc rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0
kernel: Registered IR keymap rc-dib0700-rc5
kernel: input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0/input21
kernel: dvb-usb: schedule remote query interval to 50 msecs.
kernel: dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity successfully
initialized and connected.
kernel: usbcore: registered new interface driver dvb_usb_dib0700
--
Eyal Lebedinsky (e...@eyal.emu.id.au)
