There are several ancillary functions that aren't documented.
Document them.
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
drivers/media/v4l2-core/v4l2-common.c | 14 -----
include/media/v4l2-common.h | 104 ++++++++++++++++++++++++++++++----
2 files changed, 94 insertions(+), 24 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-common.c
b/drivers/media/v4l2-core/v4l2-common.c
index fb9a2a3c1072..ac404d5083e0 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -320,20 +320,6 @@ static unsigned int clamp_align(unsigned int x, unsigned
int min,
return x;
}
-/* Bound an image to have a width between wmin and wmax, and height between
- * hmin and hmax, inclusive. Additionally, the width will be a multiple of
- * 2^walign, the height will be a multiple of 2^halign, and the overall size
- * (width*height) will be a multiple of 2^salign. The image may be shrunk
- * or enlarged to fit the alignment constraints.
- *
- * The width or height maximum must not be smaller than the corresponding
- * minimum. The alignments must not be so high there are no possible image
- * sizes within the allowed bounds. wmin and hmin must be at least 1
- * (don't use 0). If you don't care about a certain alignment, specify 0,
- * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If
- * you only want to adjust downward, specify a maximum that's the same as
- * the initial value.
- */
void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax,
unsigned int walign,
u32 *h, unsigned int hmin, unsigned int hmax,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 7ae7840df068..d3f5f907d566 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -174,17 +174,43 @@ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct
i2c_client *client,
*/
unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
+/**
+ * enum v4l2_i2c_tuner_type - specifies the range of tuner address that
+ * should be used when seeking for I2C devices.
+ *
+ * @ADDRS_RADIO: Radio tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x10 (if compiled with tea5761 support)
+ * and 0x60.
+ * @ADDRS_DEMOD: Demod tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x42, 0x43, 0x4a and 0x4b.
+ * @ADDRS_TV: TV tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62,
+ * 0x63 and 0x64.
+ * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this
+ * excludes addresses used by the demodulator
+ * from the list of candidates.
+ * Represent the following I2C addresses:
+ * 0x60, 0x61, 0x62, 0x63 and 0x64.
+ *
+ * NOTE: All I2C addresses above use the 7-bit notation.
+ */
enum v4l2_i2c_tuner_type {
- ADDRS_RADIO, /* Radio tuner addresses */
- ADDRS_DEMOD, /* Demod tuner addresses */
- ADDRS_TV, /* TV tuner addresses */
- /* TV tuner addresses if demod is present, this excludes
- addresses used by the demodulator from the list of
- candidates. */
+ ADDRS_RADIO,
+ ADDRS_DEMOD,
+ ADDRS_TV,
ADDRS_TV_WITH_DEMOD,
};
-/* Return a list of I2C tuner addresses to probe. Use only if the tuner
- addresses are unknown. */
+/**
+ * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe.
+ *
+ * @type: type of the tuner type to seek, as defined by
+ * &enum v4l2_i2c_tuner_type.
+ *
+ * NOTE: Use only if the tuner addresses are unknown.
+ */
const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
/* ------------------------------------------------------------------------- */
@@ -228,6 +254,9 @@ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct
spi_device *spi,
* FIXME: these remaining ioctls/structs should be removed as well, but they
* are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET).
* To remove these ioctls some more cleanup is needed in those modules.
+ *
+ * It doesn't make much sense on documenting them, as what we really want is
+ * to get rid of them.
*/
/* s_config */
@@ -243,17 +272,72 @@ struct v4l2_priv_tun_config {
/* Miscellaneous helper functions */
-void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
+/**
+ * v4l_bound_align_image - adjust video dimensions according to
+ * a given criteria.
+ *
+ * @width: pointer to width that will be adjusted if needed.
+ * @wmin: minimum width.
+ * @wmax: maximum width.
+ * @walign: least significant bit on width.
+ * @height: pointer to height that will be adjusted if needed.
+ * @hmin: minimum height.
+ * @hmax: maximum height.
+ * @halign: least significant bit on width.
+ * @salign: least significant bit for the image size (e. g.
+ * :math:`width * height`).
+ *
+ * Bound an image to have @width between @wmin and @wmax, and @height between
+ * @hmin and @hmax, inclusive.
+ *
+ * Additionally, the @width will be a multiple of :math:`2^{walign}`,
+ * the @height will be a multiple of :math:`2^{halign}`, and the overall
+ * size :math:`width * height` will be a multiple of :math:`2^{salign}`.
+ *
+ * .. note::
+ *
+ * #. The image may be shrunk or enlarged to fit the alignment constraints.
+ * #. @wmax must not be smaller than @wmin.
+ * #. @hmax must not be smaller than @hmin.
+ * #. The alignments must not be so high there are no possible image
+ * sizes within the allowed bounds.
+ * #. @wmin and @hmin must be at least 1 (don't use 0).
+ * #. For @walign, @halign and @salign, if you don't care about a certain
+ * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment
+ * is equivalent to no alignment.
+ * #. If you only want to adjust downward, specify a maximum that's the
+ * same as the initial value.
+ */
+void v4l_bound_align_image(unsigned int *width, unsigned int wmin,
unsigned int wmax, unsigned int walign,
- unsigned int *h, unsigned int hmin,
+ unsigned int *height, unsigned int hmin,
unsigned int hmax, unsigned int halign,
unsigned int salign);
+/**
+ * v4l2_find_nearest_format - find the nearest format size among a discrete
+ * set of resolutions.
+ *
+ * @sizes: array with a pointer to & struct v4l2_frmsize_discrete image sizes.
+ * @num_sizes: size of @sizes array.
+ * @width: desired width.
+ * @height: desired heigth.
+ *
+ * Finds the closest resolution to minimize the width and height differences
+ * between what userspace requested and the supported resolutions.
+ */
const struct v4l2_frmsize_discrete
*v4l2_find_nearest_format(const struct v4l2_frmsize_discrete *sizes,
const size_t num_sizes,
s32 width, s32 height);
+/**
+ * v4l2_get_timestamp - ancillary routine to get a timestamp to be used when
+ * filling streaming metadata. Internally, it uses ktime_get_ts(),
+ * with is the recommended way to get it.
+ *
+ * @tv: pointer to &stuct timeval to be filled.
+ */
void v4l2_get_timestamp(struct timeval *tv);
#endif /* V4L2_COMMON_H_ */
--
2.13.5
