On Fri, 20 Nov 2009, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <[email protected]>
> ---
> drivers/media/video/sh_mobile_ceu_camera.c | 25 +++++++++++++++++++++++++
> include/media/sh_mobile_ceu.h | 3 +++
> 2 files changed, 28 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/media/video/sh_mobile_ceu_camera.c
> b/drivers/media/video/sh_mobile_ceu_camera.c
> index 746aed0..e5cee0f 100644
> --- a/drivers/media/video/sh_mobile_ceu_camera.c
> +++ b/drivers/media/video/sh_mobile_ceu_camera.c
> @@ -660,6 +660,31 @@ static int sh_mobile_ceu_set_bus_param(struct
> soc_camera_device *icd,
> if (!common_flags)
> return -EINVAL;
>
> + /* Make choises, based on platform preferences */
> + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
> + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
> + if (pcdev->pdata->flags & SH_CEU_FLAG_HSP)
> + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
> + else
> + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
> + }
Right, that's exactly what I mean, thanks! And, I presume, it fixes your
problem with tm9910, right? The only change to this patch: please, rename
macros. From the above it looks like "if SH_CEU_FLAG_HSP is set platform
wanted HSYNC active low." In the PXA case HSP, VSP, and PCP are names for
respective fields in the datasheet, and, as I just notice the datasheet
has a bug describing them. In the descriptive part it says:
HSP: set => HSYNC active high, clear => HSYNC active low
VSP: set => VSYNC active low, clear => VSYNC active high
PCP: set => PIXCLK falling edge, clear => PIXCLK rising edge
But then in register field description it says both HSP and VSP if set are
active low... And this is also what the driver implements, and it seems to
work.
In any case, this confirms, how important good name choice is:-) Now, HSP,
etc. have nothing to do with SH, on CEU these fields are called HDPOL and
VDPOL. But I would suggest some descriptive names, like
SH_CEU_FLAG_HSYNC_HIGH or similar.
> +
> + if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
> + (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
> + if (pcdev->pdata->flags & SH_CEU_FLAG_VSP)
> + common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
> + else
> + common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
> + }
> +
> + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
> + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
> + if (pcdev->pdata->flags & SH_CEU_FLAG_PCP)
> + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
> + else
> + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
> + }
This is not needed, CEU only supports sampling on PCLK rising edge.
> +
> ret = icd->ops->set_bus_param(icd, common_flags);
> if (ret < 0)
> return ret;
> diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
> index 0f3524c..3726daf 100644
> --- a/include/media/sh_mobile_ceu.h
> +++ b/include/media/sh_mobile_ceu.h
> @@ -3,6 +3,9 @@
>
> #define SH_CEU_FLAG_USE_8BIT_BUS (1 << 0) /* use 8bit bus width */
> #define SH_CEU_FLAG_USE_16BIT_BUS (1 << 1) /* use 16bit bus width */
> +#define SH_CEU_FLAG_PCP (1 << 2) /* Pixel clock
> polarity */
ditto - this one is not needed.
> +#define SH_CEU_FLAG_HSP (1 << 3) /* Horizontal sync
> polarity */
> +#define SH_CEU_FLAG_VSP (1 << 4) /* Vertical sync
> polarity */
>
> struct sh_mobile_ceu_info {
> unsigned long flags;
> --
> 1.6.3.3
>
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
