On Sun, 2009-10-11 at 04:01 +0300, Aleksandr V. Piskunov wrote:
> On Tue, Oct 06, 2009 at 11:11:59AM +0300, Aleksandr V. Piskunov wrote:
> > On Tue, Oct 06, 2009 at 11:04:06AM +0300, Aleksandr V. Piskunov wrote:
> > > Added FM radio support to Avermedia AVerTV MCE 116 Plus card
> > > 
> > 
> > What leaves me puzzled, radio only works ok with ivtv newi2c=1
> > 
> > With default newi2c audio is tinny, metallic, with some strange static.
> > Similar problem with pvr-150 was reported years ago, guess issue is still
> > unresolved, perhaps something with cx25840..
> 
> This particular "tinny" audio problem is definitely I2C speed related, to be
> more precise, audio only goes bad if i2c-algo-bit is being run with udelay
> less than 15, i.e. i2c bus frequency is higher than 30 KHz.
> 
> So with default udelay=10 or udelay=5 (optimal for IR reciever on that board)
> radio goes bad. Running with newi2c=1 is ok, but again it isn't optimal for IR
> reciever on AVerTV M116.
> 
> I2C reads/writes to cx25840 themself are ok, verified using register readback
> after each write/write4. Problem seems to be that with cx25840 register writes
> coming too fast on higher i2c bus speed, switching register 0x808 _from_ 
> TV standard autodetection mode (0xff) _to_ FM radio mode (0xf9) leaves chip 
> audio detection routine in inconsistent state.
> 
> The only solution I found is to do standard routine (assert_reset + write +
> deassert_reset) followed by 50ms delay and another reset.
> 
> Following patch works_for_me, can be improved to only delay/doublereset when
> really needed, etc. Andy, could you comment/review?

Aleksandr,

Could you provide your Signed-off-by for this patch?  I'm going to
commit it as is.

Thanks,
Andy

> diff --git a/linux/drivers/media/video/cx25840/cx25840-core.c 
> b/linux/drivers/media/video/cx25840/cx25840-core.c
> --- a/linux/drivers/media/video/cx25840/cx25840-core.c
> +++ b/linux/drivers/media/video/cx25840/cx25840-core.c
> @@ -626,7 +642,13 @@
>       if (state->radio) {
>               cx25840_write(client, 0x808, 0xf9);
>               cx25840_write(client, 0x80b, 0x00);
> -     }
> +             /* Double reset cx2384x after setting FM radio mode, helps to
> +                avoid "tinny" audio when ivtv I2C bus is being run on
> +                frequency higher than 30 KHz */
> +             cx25840_and_or(client, 0x810, ~0x01, 0);
> +             msleep(50);
> +             cx25840_and_or(client, 0x810, ~0x01, 1);
> +     }       
>       else if (std & V4L2_STD_525_60) {
>               /* Certain Hauppauge PVR150 models have a hardware bug
>                  that causes audio to drop out. For these models the
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to