On 10/07/2017 04:16 PM, Hans Verkuil wrote:
From: Hans Verkuil <hans.verk...@cisco.com>
This patch series adds CEC support to the drm adv7511/adv7533 drivers.
I have tested this with the Qualcomm Dragonboard C410 (adv7533 based)
and the Renesas R-Car Koelsch board (adv7511 based).
I only have the Koelsch board to test with, but it looks like other
R-Car boards use the same adv7511. It would be nice if someone can
add CEC support to the other R-Car boards as well. The main thing
to check is if they all use the same 12 MHz fixed CEC clock source.
queued to drm-misc-next.
Thanks,
Archit
Anyone who wants to test this will need the CEC utilities that
are part of the v4l-utils git repository:
git clone git://linuxtv.org/v4l-utils.git
cd v4l-utils
./bootstrap.sh
./configure
make
sudo make install
Now configure the CEC adapter as a Playback device:
cec-ctl --playback
Discover other CEC devices:
cec-ctl -S
Regards,
Hans
Changes since v2:
- A small rewording of the 'clocks' property description in the bindings
as per Sergei's comment.
Changes since v1:
- Incorporate Archit's comments:
use defines for irq masks
combine the adv7511/33 regmap_configs
adv7511_cec_init now handles dt parsing & CEC registration
- Use the new (4.14) CEC_CAP_DEFAULTS define
Hans Verkuil (2):
dt-bindings: adi,adv7511.txt: document cec clock
drm: adv7511/33: add HDMI CEC support
.../bindings/display/bridge/adi,adv7511.txt | 4 +
drivers/gpu/drm/bridge/adv7511/Kconfig | 8 +
drivers/gpu/drm/bridge/adv7511/Makefile | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 43 ++-
drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 337 +++++++++++++++++++++
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 116 ++++++-
drivers/gpu/drm/bridge/adv7511/adv7533.c | 38 +--
7 files changed, 489 insertions(+), 58 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
