Each Gen3 SoC has a limited set of predefined routing possibilities for
which CSI-2 device and virtual channel can be routed to which VIN
instance. Prepare to store this information in the struct rvin_info.

Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verk...@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-vin.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h 
b/drivers/media/platform/rcar-vin/rcar-vin.h
index 5f736a3500b6e10f..41bf24aa8a1a0aed 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -35,6 +35,9 @@
 /* Max number on VIN instances that can be in a system */
 #define RCAR_VIN_NUM 8
 
+/* Max number of CHSEL values for any Gen3 SoC */
+#define RCAR_CHSEL_MAX 6
+
 enum chip_id {
        RCAR_H1,
        RCAR_M1,
@@ -91,6 +94,22 @@ struct rvin_graph_entity {
 
 struct rvin_group;
 
+/** struct rvin_group_chsel - Map a CSI-2 receiver and channel to a CHSEL value
+ * @csi:               VIN internal number for CSI-2 device
+ * @chan:              Output channel of the CSI-2 receiver. Each R-Car CSI-2
+ *                     receiver has four output channels facing the VIN
+ *                     devices, each channel can carry one CSI-2 Virtual
+ *                     Channel (VC) and there are no correlation between
+ *                     output channel number and CSI-2 VC. It's up to the
+ *                     CSI-2 receiver driver to configure which VC is
+ *                     outputted on which channel, the VIN devices only
+ *                     cares about output channels.
+ */
+struct rvin_group_chsel {
+       enum rvin_csi_id csi;
+       unsigned int chan;
+};
+
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @chip:              type of VIN chip
@@ -98,6 +117,9 @@ struct rvin_group;
  *
  * max_width:          max input width the VIN supports
  * max_height:         max input height the VIN supports
+ *
+ * num_chsels:         number of possible chsel values for this VIN
+ * chsels:             routing table VIN <-> CSI-2 for the chsel values
  */
 struct rvin_info {
        enum chip_id chip;
@@ -105,6 +127,9 @@ struct rvin_info {
 
        unsigned int max_width;
        unsigned int max_height;
+
+       unsigned int num_chsels;
+       struct rvin_group_chsel chsels[RCAR_VIN_NUM][RCAR_CHSEL_MAX];
 };
 
 /**
-- 
2.15.0

Reply via email to