Hi Laurent,

Thanks for your comment.

On 2017-12-08 10:33:32 +0200, Laurent Pinchart wrote:
> Hi Niklas,
> 
> Thank you for the patch.
> 
> On Friday, 8 December 2017 03:08:23 EET Niklas Söderlund wrote:
> > The logic to preserve the requested format width and height are too
> > complex and come from a premature optimization for Gen3. All Gen2 SoC
> > can scale and the Gen3 implementation will not use these functions at
> > all so simply preserve the width and height when interacting with the
> > subdevice much like the field is preserved simplifies the logic quite a
> > bit.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> > Reviewed-by: Hans Verkuil <hans.verk...@cisco.com>
> > ---
> >  drivers/media/platform/rcar-vin/rcar-dma.c  |  8 --------
> >  drivers/media/platform/rcar-vin/rcar-v4l2.c | 22 ++++++++++------------
> >  drivers/media/platform/rcar-vin/rcar-vin.h  |  2 --
> >  3 files changed, 10 insertions(+), 22 deletions(-)
> > 
> > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> > b/drivers/media/platform/rcar-vin/rcar-dma.c index
> > a7cda3922cb74baa..fd14be20a6604d7a 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> > @@ -585,14 +585,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
> >             0, 0);
> >  }
> > 
> > -void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
> > -               u32 width, u32 height)
> > -{
> > -   /* All VIN channels on Gen2 have scalers */
> > -   pix->width = width;
> > -   pix->height = height;
> > -}
> > -
> >  /*
> > ---------------------------------------------------------------------------
> > -- * Hardware setup
> >   */
> > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> > 19de99133f048960..1c5e7f6d5b963740 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > @@ -166,6 +166,7 @@ static int __rvin_try_format_source(struct rvin_dev
> > *vin, .which = which,
> >     };
> >     enum v4l2_field field;
> > +   u32 width, height;
> >     int ret;
> > 
> >     sd = vin_to_source(vin);
> > @@ -178,7 +179,10 @@ static int __rvin_try_format_source(struct rvin_dev
> > *vin,
> > 
> >     format.pad = vin->digital->source_pad;
> > 
> > +   /* Allow the video device to override field and to scale */
> >     field = pix->field;
> > +   width = pix->width;
> > +   height = pix->height;
> > 
> >     ret = v4l2_subdev_call(sd, pad, set_fmt, pad_cfg, &format);
> >     if (ret < 0 && ret != -ENOIOCTLCMD)
> > @@ -191,6 +195,9 @@ static int __rvin_try_format_source(struct rvin_dev
> > *vin, source->width = pix->width;
> >     source->height = pix->height;
> > 
> 
> I would move the pix->field = field line not shown above to here.

Agree, thanks I will do so.

> 
> Apart from that,
> 
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

Thanks.

> 
> > +   pix->width = width;
> > +   pix->height = height;
> > +
> >     vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
> >             source->height);
> > 
> > @@ -204,13 +211,9 @@ static int __rvin_try_format(struct rvin_dev *vin,
> >                          struct v4l2_pix_format *pix,
> >                          struct rvin_source_fmt *source)
> >  {
> > -   u32 rwidth, rheight, walign;
> > +   u32 walign;
> >     int ret;
> > 
> > -   /* Requested */
> > -   rwidth = pix->width;
> > -   rheight = pix->height;
> > -
> >     /* Keep current field if no specific one is asked for */
> >     if (pix->field == V4L2_FIELD_ANY)
> >             pix->field = vin->format.field;
> > @@ -248,10 +251,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
> >             break;
> >     }
> > 
> > -   /* If source can't match format try if VIN can scale */
> > -   if (source->width != rwidth || source->height != rheight)
> > -           rvin_scale_try(vin, pix, rwidth, rheight);
> > -
> >     /* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> >     walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> > 
> > @@ -270,9 +269,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
> >             return -EINVAL;
> >     }
> > 
> > -   vin_dbg(vin, "Requested %ux%u Got %ux%u bpl: %d size: %d\n",
> > -           rwidth, rheight, pix->width, pix->height,
> > -           pix->bytesperline, pix->sizeimage);
> > +   vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> > +           pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> > 
> >     return 0;
> >  }
> > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
> > b/drivers/media/platform/rcar-vin/rcar-vin.h index
> > 646f897f5c05ec4e..36d0f0cc4ce01a6e 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> > @@ -176,8 +176,6 @@ void rvin_v4l2_unregister(struct rvin_dev *vin);
> >  const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
> > 
> >  /* Cropping, composing and scaling */
> > -void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
> > -               u32 width, u32 height);
> >  void rvin_crop_scale_comp(struct rvin_dev *vin);
> > 
> >  #endif
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> 

-- 
Regards,
Niklas Söderlund

Reply via email to