Hi Dan,

On Sun, Dec 24, 2017 at 11:03:08PM -0500, Dan Gopstein wrote:
> From: Dan Gopstein <[email protected]>
> 
> Replace usages of the locally defined ABS() macro with calls to the
> canonical abs() from kernel.h and remove the old definitions of ABS()

The note about some wrong ABS() macro implementations that the previous patch 
version had is still useful, I believe.

baruch

> 
> Signed-off-by: Dan Gopstein <[email protected]>
> ---
> v2->v3:
> * replace local ABS() with kernel's abs()
> 
> v1->v2:
> * unmangled the patch
> * added example to commit text
> 
>  drivers/media/dvb-frontends/dib0090.c        | 4 ++--
>  drivers/media/dvb-frontends/dib7000p.c       | 2 +-
>  drivers/media/dvb-frontends/dib8000.c        | 2 +-
>  drivers/media/dvb-frontends/dibx000_common.h | 2 --
>  drivers/media/dvb-frontends/mb86a16.c        | 8 +++-----
>  drivers/media/dvb-frontends/stv0367_priv.h   | 1 -
>  drivers/media/dvb-frontends/stv0900_priv.h   | 1 -
>  drivers/media/dvb-frontends/stv0900_sw.c     | 6 +++---
>  8 files changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/dvb-frontends/dib0090.c 
> b/drivers/media/dvb-frontends/dib0090.c
> index d9d730d..633a961 100644
> --- a/drivers/media/dvb-frontends/dib0090.c
> +++ b/drivers/media/dvb-frontends/dib0090.c
> @@ -1285,7 +1285,7 @@ int dib0090_gain_control(struct dvb_frontend *fe)
>  #endif
>  
>                       if (*tune_state == CT_AGC_STEP_1) {     /* quickly go 
> to the correct range of the ADC power */
> -                             if (ABS(adc_error) < 50 || state->agc_step++ > 
> 5) {
> +                             if (abs(adc_error) < 50 || state->agc_step++ > 
> 5) {
>  
>  #ifdef CONFIG_STANDARD_DAB
>                                       if 
> (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) {
> @@ -1754,7 +1754,7 @@ static int dib0090_dc_offset_calibration(struct 
> dib0090_state *state, enum front
>                       *tune_state = CT_TUNER_STEP_1;
>               } else {
>                       /* the minimum was what we have seen in the step before 
> */
> -                     if (ABS(state->adc_diff) > ABS(state->min_adc_diff)) {
> +                     if (abs(state->adc_diff) > abs(state->min_adc_diff)) {
>                               dprintk("Since adc_diff N = %d  > adc_diff step 
> N-1 = %d, Come back one step\n", state->adc_diff, state->min_adc_diff);
>                               state->step--;
>                       }
> diff --git a/drivers/media/dvb-frontends/dib7000p.c 
> b/drivers/media/dvb-frontends/dib7000p.c
> index 0fbaabe..6fc34b3 100644
> --- a/drivers/media/dvb-frontends/dib7000p.c
> +++ b/drivers/media/dvb-frontends/dib7000p.c
> @@ -809,7 +809,7 @@ static int dib7000p_set_dds(struct dib7000p_state *state, 
> s32 offset_khz)
>  {
>       u32 internal = dib7000p_get_internal_freq(state);
>       s32 unit_khz_dds_val;
> -     u32 abs_offset_khz = ABS(offset_khz);
> +     u32 abs_offset_khz = abs(offset_khz);
>       u32 dds = state->cfg.bw->ifreq & 0x1ffffff;
>       u8 invert = !!(state->cfg.bw->ifreq & (1 << 25));
>       if (internal == 0) {
> diff --git a/drivers/media/dvb-frontends/dib8000.c 
> b/drivers/media/dvb-frontends/dib8000.c
> index 5d93815..4680a8b 100644
> --- a/drivers/media/dvb-frontends/dib8000.c
> +++ b/drivers/media/dvb-frontends/dib8000.c
> @@ -2677,7 +2677,7 @@ static void dib8000_viterbi_state(struct dib8000_state 
> *state, u8 onoff)
>  static void dib8000_set_dds(struct dib8000_state *state, s32 offset_khz)
>  {
>       s16 unit_khz_dds_val;
> -     u32 abs_offset_khz = ABS(offset_khz);
> +     u32 abs_offset_khz = abs(offset_khz);
>       u32 dds = state->cfg.pll->ifreq & 0x1ffffff;
>       u8 invert = !!(state->cfg.pll->ifreq & (1 << 25));
>       u8 ratio;
> diff --git a/drivers/media/dvb-frontends/dibx000_common.h 
> b/drivers/media/dvb-frontends/dibx000_common.h
> index 8784af9..12b58f5 100644
> --- a/drivers/media/dvb-frontends/dibx000_common.h
> +++ b/drivers/media/dvb-frontends/dibx000_common.h
> @@ -223,8 +223,6 @@ struct dvb_frontend_parametersContext {
>  
>  #define FE_CALLBACK_TIME_NEVER 0xffffffff
>  
> -#define ABS(x) ((x < 0) ? (-x) : (x))
> -
>  #define DATA_BUS_ACCESS_MODE_8BIT                 0x01
>  #define DATA_BUS_ACCESS_MODE_16BIT                0x02
>  #define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
> diff --git a/drivers/media/dvb-frontends/mb86a16.c 
> b/drivers/media/dvb-frontends/mb86a16.c
> index dfe322e..ced59f9 100644
> --- a/drivers/media/dvb-frontends/mb86a16.c
> +++ b/drivers/media/dvb-frontends/mb86a16.c
> @@ -31,8 +31,6 @@
>  static unsigned int verbose = 5;
>  module_param(verbose, int, 0644);
>  
> -#define ABS(x)               ((x) < 0 ? (-x) : (x))
> -
>  struct mb86a16_state {
>       struct i2c_adapter              *i2c_adap;
>       const struct mb86a16_config     *config;
> @@ -1201,12 +1199,12 @@ static int mb86a16_set_fe(struct mb86a16_state *state)
>  
>                       signal_dupl = 0;
>                       for (j = 0; j < prev_freq_num; j++) {
> -                             if ((ABS(prev_swp_freq[j] - swp_freq)) < 
> (swp_ofs * 3 / 2)) {
> +                             if ((abs(prev_swp_freq[j] - swp_freq)) < 
> (swp_ofs * 3 / 2)) {
>                                       signal_dupl = 1;
>                                       dprintk(verbose, MB86A16_INFO, 1, 
> "Probably Duplicate Signal, j = %d", j);
>                               }
>                       }
> -                     if ((signal_dupl == 0) && (swp_freq > 0) && 
> (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
> +                     if ((signal_dupl == 0) && (swp_freq > 0) && 
> (abs(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
>                               dprintk(verbose, MB86A16_DEBUG, 1, "------ 
> Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
>                               prev_swp_freq[prev_freq_num] = swp_freq;
>                               prev_freq_num++;
> @@ -1380,7 +1378,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state)
>                       dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = 
> %d", swp_freq);
>                       swp_freq += delta_freq;
>                       dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA 
> Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
> -                     if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
> +                     if (abs(state->frequency * 1000 - swp_freq) > 3800) {
>                               dprintk(verbose, MB86A16_INFO, 1, "NO  --  
> SIGNAL !");
>                       } else {
>  
> diff --git a/drivers/media/dvb-frontends/stv0367_priv.h 
> b/drivers/media/dvb-frontends/stv0367_priv.h
> index 8abc451..460066a 100644
> --- a/drivers/media/dvb-frontends/stv0367_priv.h
> +++ b/drivers/media/dvb-frontends/stv0367_priv.h
> @@ -35,7 +35,6 @@
>  #endif
>  
>  /* MACRO definitions */
> -#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X))
>  #define MAX(X, Y) ((X) >= (Y) ? (X) : (Y))
>  #define MIN(X, Y) ((X) <= (Y) ? (X) : (Y))
>  #define INRANGE(X, Y, Z) \
> diff --git a/drivers/media/dvb-frontends/stv0900_priv.h 
> b/drivers/media/dvb-frontends/stv0900_priv.h
> index 7a95f95..97c1237 100644
> --- a/drivers/media/dvb-frontends/stv0900_priv.h
> +++ b/drivers/media/dvb-frontends/stv0900_priv.h
> @@ -24,7 +24,6 @@
>  
>  #include <linux/i2c.h>
>  
> -#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X))
>  #define INRANGE(X, Y, Z) ((((X) <= (Y)) && ((Y) <= (Z))) \
>               || (((Z) <= (Y)) && ((Y) <= (X))) ? 1 : 0)
>  
> diff --git a/drivers/media/dvb-frontends/stv0900_sw.c 
> b/drivers/media/dvb-frontends/stv0900_sw.c
> index c97a391..d406c83 100644
> --- a/drivers/media/dvb-frontends/stv0900_sw.c
> +++ b/drivers/media/dvb-frontends/stv0900_sw.c
> @@ -1255,14 +1255,14 @@ fe_stv0900_signal_type 
> stv0900_get_signal_params(struct dvb_frontend *fe)
>               else
>                       intp->freq[d] = stv0900_get_tuner_freq(fe);
>  
> -             if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
> +             if (abs(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
>                       range = STV0900_RANGEOK;
> -             else if (ABS(offsetFreq) <=
> +             else if (abs(offsetFreq) <=
>                               (stv0900_carrier_width(result->symbol_rate,
>                                               result->rolloff) / 2000))
>                       range = STV0900_RANGEOK;
>  
> -     } else if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
> +     } else if (abs(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
>               range = STV0900_RANGEOK;
>  
>       dprintk("%s: range %d\n", __func__, range);
> -- 
> 2.7.4
> 

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - [email protected] - tel: +972.2.679.5364, http://www.tkos.co.il -

Reply via email to