On Wed, Jan 03, 2018 at 08:47:09AM +0000, Hugues FRUCHET wrote:
> Hi Sakari,
> this is fine for me to drop those two lines so sync signals become
> mandatory.
> Must I repost a v5 serie ?
Here's the diff:
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
index e26a84646603..8e36da0d8406 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
@@ -31,8 +31,6 @@ Endpoint node required properties for parallel connection are:
or <10> for 10 bits parallel bus
- data-shift: shall be set to <2> for 8 bits parallel bus
(lines 9:2 are used) or <0> for 10 bits parallel bus
-
-Endpoint node optional properties for parallel connection are:
- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH
respectively.
- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH
respectively.
- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
--
Sakari Ailus
e-mail: [email protected]
