On 01/10/18 17:07, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.pado...@collabora.com>
>
> If V4L2_BUF_FLAG_OUT_FENCE flag is present on the QBUF call we create
> an out_fence and send its fd to userspace on the fence_fd field as a
> return arg for the QBUF call.
>
> The fence is signaled on buffer_done(), when the job on the buffer is
> finished.
>
> v8:
> - return 0 as fence_fd if OUT_FENCE flag not used (Mauro)
> - fix crash when checking not using fences in vb2_buffer_done()
>
> v7:
> - merge patch that add the infrastructure to out-fences into
> this one (Alex Courbot)
> - Do not install the fd if there is no fence. (Alex Courbot)
> - do not report error on requeueing, just WARN_ON_ONCE() (Hans)
>
> v6
> - get rid of the V4L2_EVENT_OUT_FENCE event. We always keep the
> ordering in vb2 for queueing in the driver, so the event is not
> necessary anymore and the out_fence_fd is sent back to userspace
> on QBUF call return arg
> - do not allow requeueing with out-fences, instead mark the buffer
> with an error and wake up to userspace.
> - send the out_fence_fd back to userspace on the fence_fd field
>
> v5:
> - delay fd_install to DQ_EVENT (Hans)
> - if queue is fully ordered send OUT_FENCE event right away
> (Brian)
> - rename 'q->ordered' to 'q->ordered_in_driver'
> - merge change to implement OUT_FENCE event here
>
> v4:
> - return the out_fence_fd in the BUF_QUEUED event(Hans)
>
> v3: - add WARN_ON_ONCE(q->ordered) on requeueing (Hans)
> - set the OUT_FENCE flag if there is a fence pending (Hans)
> - call fd_install() after vb2_core_qbuf() (Hans)
> - clean up fence if vb2_core_qbuf() fails (Hans)
> - add list to store sync_file and fence for the next queued buffer
>
> v2: check if the queue is ordered.
>
> Signed-off-by: Gustavo Padovan <gustavo.pado...@collabora.com>
> ---
> drivers/media/common/videobuf/videobuf2-core.c | 101
> +++++++++++++++++++++++--
> drivers/media/common/videobuf/videobuf2-v4l2.c | 28 ++++++-
> include/media/videobuf2-core.h | 22 ++++++
> 3 files changed, 140 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/common/videobuf/videobuf2-core.c
> b/drivers/media/common/videobuf/videobuf2-core.c
> index 777e3a2bc746..1f30d9efb7c8 100644
> --- a/drivers/media/common/videobuf/videobuf2-core.c
> +++ b/drivers/media/common/videobuf/videobuf2-core.c
> @@ -25,6 +25,7 @@
> #include <linux/sched.h>
> #include <linux/freezer.h>
> #include <linux/kthread.h>
> +#include <linux/sync_file.h>
>
> #include <media/videobuf2-core.h>
> #include <media/v4l2-mc.h>
> @@ -357,6 +358,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum
> vb2_memory memory,
> vb->planes[plane].length = plane_sizes[plane];
> vb->planes[plane].min_length = plane_sizes[plane];
> }
> + vb->out_fence_fd = -1;
> q->bufs[vb->index] = vb;
>
> /* Allocate video buffer memory for the MMAP type */
> @@ -939,10 +941,22 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum
> vb2_buffer_state state)
> case VB2_BUF_STATE_QUEUED:
> break;
> case VB2_BUF_STATE_REQUEUEING:
> + /* Requeuing with explicit synchronization, spit warning */
> + WARN_ON_ONCE(vb->out_fence);
> +
> if (q->start_streaming_called)
> __enqueue_in_driver(vb);
> - return;
> + break;
> default:
> + if (vb->out_fence) {
> + if (state == VB2_BUF_STATE_ERROR)
> + dma_fence_set_error(vb->out_fence, -EFAULT);
> + dma_fence_signal(vb->out_fence);
> + dma_fence_put(vb->out_fence);
> + vb->out_fence = NULL;
> + vb->out_fence_fd = -1;
> + }
> +
> /* Inform any processes that may be waiting for buffers */
> wake_up(&q->done_wq);
> break;
> @@ -1341,6 +1355,65 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned
> int index, void *pb)
> }
> EXPORT_SYMBOL_GPL(vb2_core_prepare_buf);
>
> +static inline const char *vb2_fence_get_driver_name(struct dma_fence *fence)
> +{
> + return "vb2_fence";
> +}
> +
> +static inline const char *vb2_fence_get_timeline_name(struct dma_fence
> *fence)
> +{
> + return "vb2_fence_timeline";
> +}
> +
> +static inline bool vb2_fence_enable_signaling(struct dma_fence *fence)
> +{
> + return true;
> +}
> +
> +static const struct dma_fence_ops vb2_fence_ops = {
> + .get_driver_name = vb2_fence_get_driver_name,
> + .get_timeline_name = vb2_fence_get_timeline_name,
> + .enable_signaling = vb2_fence_enable_signaling,
> + .wait = dma_fence_default_wait,
> +};
> +
> +int vb2_setup_out_fence(struct vb2_queue *q, unsigned int index)
> +{
> + struct vb2_buffer *vb;
> + u64 context;
> +
> + vb = q->bufs[index];
> +
> + vb->out_fence_fd = get_unused_fd_flags(O_CLOEXEC);
> +
> + if (call_qop(q, is_unordered, q))
> + context = dma_fence_context_alloc(1);
> + else
> + context = q->out_fence_context;
> +
> + vb->out_fence = kzalloc(sizeof(*vb->out_fence), GFP_KERNEL);
> + if (!vb->out_fence)
> + return -ENOMEM;
> +
> + dma_fence_init(vb->out_fence, &vb2_fence_ops, &q->out_fence_lock,
> + context, 1);
> + if (!vb->out_fence) {
> + put_unused_fd(vb->out_fence_fd);
> + return -ENOMEM;
> + }
> +
> + vb->sync_file = sync_file_create(vb->out_fence);
> + if (!vb->sync_file) {
> + put_unused_fd(vb->out_fence_fd);
> + dma_fence_put(vb->out_fence);
> + vb->out_fence = NULL;
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(vb2_setup_out_fence);
> +
> /*
> * vb2_start_streaming() - Attempt to start streaming.
> * @q: videobuf2 queue
> @@ -1489,18 +1562,16 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int
> index, void *pb,
This function is now very confusing. The last argument is a fence, but it is set
for both in and out fences, and the previous patch sets vb->in_fence to fence.
Even though the fence passed in this case is an out fence.
I think it would be much easier to understand if you add both an in_fence and
out_fence argument to this function.
Is it possible to have both and in and out fence for the same buffer? I think
it is and in that case you really need two fences.
> if (vb->in_fence) {
> ret = dma_fence_add_callback(vb->in_fence, &vb->fence_cb,
> vb2_qbuf_fence_cb);
> - if (ret == -EINVAL) {
> + /* is the fence signaled? */
> + if (ret == -ENOENT) {
> + dma_fence_put(vb->in_fence);
> + vb->in_fence = NULL;
> + } else if (ret) {
> spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> goto err;
> - } else if (!ret) {
> - goto fill;
> }
> -
> - dma_fence_put(vb->in_fence);
> - vb->in_fence = NULL;
> }
>
> -fill:
> /*
> * If already streaming and there is no fence to wait on
> * give the buffer to driver for processing.
> @@ -1535,6 +1606,11 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int
> index, void *pb,
> if (pb)
> call_void_bufop(q, fill_user_buffer, vb, pb);
>
> + if (vb->out_fence) {
> + fd_install(vb->out_fence_fd, vb->sync_file->file);
> + vb->sync_file = NULL;
> + }
> +
> dprintk(2, "qbuf of buffer %d succeeded\n", vb->index);
> return 0;
>
> @@ -1802,6 +1878,12 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> }
>
> + /*
> + * Renew out-fence context.
> + */
> + if (!call_qop(q, is_unordered, q))
> + q->out_fence_context = dma_fence_context_alloc(1);
I don't think this is the right place. If a driver implements is_unordered, then
the return value depends on the format. And that isn't locked in until buffers
are allocated (i.e. reqbufs or create_bufs is called). So that's the moment that
you can set this up.
BTW: I noticed is_unordered() returned an int instead of a bool. I think a bool
makes more sense.
> +
> /*
> * Remove all buffers from videobuf's list...
> */
> @@ -2134,6 +2216,9 @@ int vb2_core_queue_init(struct vb2_queue *q)
> spin_lock_init(&q->done_lock);
> mutex_init(&q->mmap_lock);
> init_waitqueue_head(&q->done_wq);
> + if (!call_qop(q, is_unordered, q))
> + q->out_fence_context = dma_fence_context_alloc(1);
Same here: at this moment you do not know if the queue is ordered or
unordered.
> + spin_lock_init(&q->out_fence_lock);
>
> q->memory = VB2_MEMORY_UNKNOWN;
>
> diff --git a/drivers/media/common/videobuf/videobuf2-v4l2.c
> b/drivers/media/common/videobuf/videobuf2-v4l2.c
> index 0a41e3bb7733..f1291c25323f 100644
> --- a/drivers/media/common/videobuf/videobuf2-v4l2.c
> +++ b/drivers/media/common/videobuf/videobuf2-v4l2.c
> @@ -179,12 +179,16 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue
> *q, struct v4l2_buffer *b,
> return -EINVAL;
> }
>
> - if ((b->fence_fd != 0 && b->fence_fd != -1) &&
> - !(b->flags & V4L2_BUF_FLAG_IN_FENCE)) {
> + if (b->fence_fd > 0 && !(b->flags & V4L2_BUF_FLAG_IN_FENCE)) {
> dprintk(1, "%s: fence_fd set without IN_FENCE flag\n", opname);
> return -EINVAL;
> }
>
> + if (b->fence_fd == -1 && (b->flags & V4L2_BUF_FLAG_IN_FENCE)) {
Shouldn't this be b->fence_fd <= 0?
> + dprintk(1, "%s: IN_FENCE flag set but no fence_fd\n", opname);
> + return -EINVAL;
> + }
> +
> return __verify_planes_array(q->bufs[b->index], b);
> }
>
> @@ -212,7 +216,12 @@ static void __fill_v4l2_buffer(struct vb2_buffer *vb,
> void *pb)
> b->sequence = vbuf->sequence;
> b->reserved = 0;
>
> - b->fence_fd = 0;
> + if (b->flags & V4L2_BUF_FLAG_OUT_FENCE) {
> + b->fence_fd = vb->out_fence_fd;
> + } else {
> + b->fence_fd = 0;
> + }
> +
> if (vb->in_fence)
> b->flags |= V4L2_BUF_FLAG_IN_FENCE;
> else
> @@ -491,6 +500,10 @@ int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer
> *b)
> ret = __verify_planes_array(vb, b);
> if (!ret)
> vb2_core_querybuf(q, b->index, b);
> +
> + /* Do not return the out-fence fd on querybuf */
> + if (vb->out_fence)
> + b->fence_fd = -1;
This does not hurt. We also return dmabuf fds in the same way in querybuf.
I would drop this.
> return ret;
> }
> EXPORT_SYMBOL(vb2_querybuf);
> @@ -595,6 +608,15 @@ int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
> }
> }
>
> + if (b->flags & V4L2_BUF_FLAG_OUT_FENCE) {
> + ret = vb2_setup_out_fence(q, b->index);
> + if (ret) {
> + dprintk(1, "failed to set up out-fence\n");
> + dma_fence_put(fence);
> + return ret;
> + }
> + }
> +
> return vb2_core_qbuf(q, b->index, b, fence);
Hmm. So if vb2_core_qbuf returns an error, we still have created the out fence?
As mentioned above, it is very confusing that the same vb2_core_qbuf 'fence'
argument is used for both in and out fences.
> }
> EXPORT_SYMBOL_GPL(vb2_qbuf);
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index 0a2b1ac12dd0..260435dfc301 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -260,6 +260,10 @@ struct vb2_buffer {
> * using the buffer (queueing to the driver)
> * fence_cb: fence callback information
> * fence_cb_lock: protect callback signal/remove
> + * out_fence_fd: the out_fence_fd to be shared with userspace.
> + * out_fence: the out-fence associated with the buffer once
> + * it is queued to the driver.
> + * sync_file: the sync file to wrap the out fence
> */
> enum vb2_buffer_state state;
>
> @@ -271,6 +275,10 @@ struct vb2_buffer {
> struct dma_fence_cb fence_cb;
> spinlock_t fence_cb_lock;
>
> + int out_fence_fd;
> + struct dma_fence *out_fence;
> + struct sync_file *sync_file;
> +
> #ifdef CONFIG_VIDEO_ADV_DEBUG
> /*
> * Counters for how often these buffer-related ops are
> @@ -514,6 +522,7 @@ struct vb2_buf_ops {
> * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if
> the
> * last decoded buffer was already dequeued. Set for capture queues
> * when a buffer with the %V4L2_BUF_FLAG_LAST is dequeued.
> + * @out_fence_context: the fence context for the out fences
> * @fileio: file io emulator internal data, used only if emulator is active
> * @threadio: thread io internal data, used only if thread is active
> */
> @@ -567,6 +576,9 @@ struct vb2_queue {
> unsigned int copy_timestamp:1;
> unsigned int last_buffer_dequeued:1;
>
> + u64 out_fence_context;
> + spinlock_t out_fence_lock;
> +
> struct vb2_fileio_data *fileio;
> struct vb2_threadio_data *threadio;
>
> @@ -753,6 +765,16 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum
> vb2_memory memory,
> */
> int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
>
> +/**
> + * vb2_setup_out_fence() - setup new out-fence
> + * @q: The vb2_queue where to setup it
> + * @index: index of the buffer
> + *
> + * Setup the file descriptor, the fence and the sync_file for the next
> + * buffer to be queued and add everything to the tail of the
> q->out_fence_list.
> + */
> +int vb2_setup_out_fence(struct vb2_queue *q, unsigned int index);
> +
> /**
> * vb2_core_qbuf() - Queue a buffer from userspace
> *
>
Regards,
Hans
