I have a DVB-T USB device ( T14BR), which seems to work fine when I plug in my Fedora 10 box but I if I reboot with device connected it regularity fails to initialise correctly and to correct I have to remove unplug-device remove the module and reload module to fix up and only after system has been fully booted
eg modprobe -r dvb-usb-dib0700 then modprobe dvb-usb-dib0700 adapter_nr=2 and then plug device in. I get the following msgs when it seems to fail and the second set when it works kernel log (failed) Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 2 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 3 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 4 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 5 Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using ohci_hcd and address 6 Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 choice Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, idVendor=413c, idProduct=3010 Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver hiddev Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:02.0-8 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver usbhid Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driver http://www.artectv.com/ehtm/products/t14.htm kernel log (working) Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3 Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 choice Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, idVendor=05d8, idProduct=810f Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070 Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001 Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 different device-types Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in cold state, will try to load a firmware Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully. Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in warm state. Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec T14BR DVB-T) Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1 -8/input/input7 Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval to 150 msecs. Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfully initialized and connected. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
