Hi Ibtsam,
On Thu, 2018-04-05 at 16:24 +0200, Ibtsam Ul-Haq wrote:
> Hi Fabio,
>
> Thanks for your reply.
>
> On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevam <feste...@gmail.com> wrote:
> > Hi Ibtsam,
> >
> > [Adding Steve and Philipp in case they can provide some suggestions]
> >
> > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq <ibtsam.haq.0...@gmail.com>
> > wrote:
> > > Greetings everyone,
> > >
> > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board
> > > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The
> > > problem is that I am not seeing the /dev/media0 node.
> >
> > Can you share your dts?
> >
>
> Certainly. The dts provided by the board manufacturer was meant to
> work with their own kernel, I tried to modify it to work with the
> mainline kernel.
>
> The sensor related nodes are:
>
[...]
> mt9p031_1: cam1@5d {
> compatible = "aptina,mt9p031";
> reg = <0x5d>;
> status = "okay";
[...]
> I intend to use two cameras simultaneously. In my current setup
> however only one camera is physically connected.
Try disabling this camera as long as it is not present, otherwise the
imx-media driver will wait forever for it to appear before creating
/dev/media0.
regards
Philipp
