The TDA998x is a HDMI transmitter with a TDA9950 CEC engine integrated
onto the same die. Add support for the TDA9950 CEC engine to the
TDA998x driver.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/gpu/drm/i2c/Kconfig | 1 +
drivers/gpu/drm/i2c/tda998x_drv.c | 195 ++++++++++++++++++++++++++++++++++++--
2 files changed, 187 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 3a232f5ff0a1..65d3acb61c03 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -22,6 +22,7 @@ config DRM_I2C_SIL164
config DRM_I2C_NXP_TDA998X
tristate "NXP Semiconductors TDA998X HDMI encoder"
default m if DRM_TILCDC
+ select CEC_CORE if CEC_NOTIFIER
select SND_SOC_HDMI_CODEC if SND_SOC
help
Support for NXP Semiconductors TDA998X HDMI encoders.
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
b/drivers/gpu/drm/i2c/tda998x_drv.c
index 16e0439cad44..eb9916bd84a4 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -16,8 +16,10 @@
*/
#include <linux/component.h>
+#include <linux/gpio/consumer.h>
#include <linux/hdmi.h>
#include <linux/module.h>
+#include <linux/platform_data/tda9950.h>
#include <linux/irq.h>
#include <sound/asoundef.h>
#include <sound/hdmi-codec.h>
@@ -29,6 +31,8 @@
#include <drm/drm_of.h>
#include <drm/i2c/tda998x.h>
+#include <media/cec-notifier.h>
+
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
struct tda998x_audio_port {
@@ -55,6 +59,7 @@ struct tda998x_priv {
struct platform_device *audio_pdev;
struct mutex audio_mutex;
+ struct mutex edid_mutex;
wait_queue_head_t wq_edid;
volatile int wq_edid_wait;
@@ -67,6 +72,9 @@ struct tda998x_priv {
struct drm_connector connector;
struct tda998x_audio_port audio_port[2];
+ struct tda9950_glue cec_glue;
+ struct gpio_desc *calib;
+ struct cec_notifier *cec_notify;
};
#define conn_to_tda998x_priv(x) \
@@ -345,6 +353,12 @@ struct tda998x_priv {
#define REG_CEC_INTSTATUS 0xee /* read */
# define CEC_INTSTATUS_CEC (1 << 0)
# define CEC_INTSTATUS_HDMI (1 << 1)
+#define REG_CEC_CAL_XOSC_CTRL1 0xf2
+# define CEC_CAL_XOSC_CTRL1_ENA_CAL BIT(0)
+#define REG_CEC_DES_FREQ2 0xf5
+# define CEC_DES_FREQ2_DIS_AUTOCAL BIT(7)
+#define REG_CEC_CLK 0xf6
+# define CEC_CLK_FRO 0x11
#define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */
# define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7)
# define CEC_FRO_IM_CLK_CTRL_ENA_OTP (1 << 6)
@@ -359,6 +373,7 @@ struct tda998x_priv {
# define CEC_RXSHPDLEV_HPD (1 << 1)
#define REG_CEC_ENAMODS 0xff /* read/write */
+# define CEC_ENAMODS_EN_CEC_CLK (1 << 7)
# define CEC_ENAMODS_DIS_FRO (1 << 6)
# define CEC_ENAMODS_DIS_CCLK (1 << 5)
# define CEC_ENAMODS_EN_RXSENS (1 << 2)
@@ -417,6 +432,114 @@ cec_read(struct tda998x_priv *priv, u8 addr)
return val;
}
+static void cec_enamods(struct tda998x_priv *priv, u8 mods, bool enable)
+{
+ int val = cec_read(priv, REG_CEC_ENAMODS);
+
+ if (val < 0)
+ return;
+
+ if (enable)
+ val |= mods;
+ else
+ val &= ~mods;
+
+ cec_write(priv, REG_CEC_ENAMODS, val);
+}
+
+static void tda998x_cec_set_calibration(struct tda998x_priv *priv, bool enable)
+{
+ if (enable) {
+ u8 val;
+
+ cec_write(priv, 0xf3, 0xc0);
+ cec_write(priv, 0xf4, 0xd4);
+
+ /* Enable automatic calibration mode */
+ val = cec_read(priv, REG_CEC_DES_FREQ2);
+ val &= ~CEC_DES_FREQ2_DIS_AUTOCAL;
+ cec_write(priv, REG_CEC_DES_FREQ2, val);
+
+ /* Enable free running oscillator */
+ cec_write(priv, REG_CEC_CLK, CEC_CLK_FRO);
+ cec_enamods(priv, CEC_ENAMODS_DIS_FRO, false);
+
+ cec_write(priv, REG_CEC_CAL_XOSC_CTRL1,
+ CEC_CAL_XOSC_CTRL1_ENA_CAL);
+ } else {
+ cec_write(priv, REG_CEC_CAL_XOSC_CTRL1, 0);
+ }
+}
+
+/*
+ * Calibration for the internal oscillator: we need to set calibration mode,
+ * and then pulse the IRQ line low for a 10ms ± 1% period.
+ */
+static void tda998x_cec_calibration(struct tda998x_priv *priv)
+{
+ struct gpio_desc *calib = priv->calib;
+
+ mutex_lock(&priv->edid_mutex);
+ if (priv->hdmi->irq > 0)
+ disable_irq(priv->hdmi->irq);
+ gpiod_direction_output(calib, 1);
+ tda998x_cec_set_calibration(priv, true);
+
+ local_irq_disable();
+ gpiod_set_value(calib, 0);
+ mdelay(10);
+ gpiod_set_value(calib, 1);
+ local_irq_enable();
+
+ tda998x_cec_set_calibration(priv, false);
+ gpiod_direction_input(calib);
+ if (priv->hdmi->irq > 0)
+ enable_irq(priv->hdmi->irq);
+ mutex_unlock(&priv->edid_mutex);
+}
+
+static int tda998x_cec_hook_init(void *data)
+{
+ struct tda998x_priv *priv = data;
+ struct gpio_desc *calib;
+
+ calib = gpiod_get(&priv->hdmi->dev, "nxp,calib", GPIOD_ASIS);
+ if (IS_ERR(calib)) {
+ dev_warn(&priv->hdmi->dev, "failed to get calibration gpio:
%ld\n",
+ PTR_ERR(calib));
+ return PTR_ERR(calib);
+ }
+
+ priv->calib = calib;
+
+ return 0;
+}
+
+static void tda998x_cec_hook_exit(void *data)
+{
+ struct tda998x_priv *priv = data;
+
+ gpiod_put(priv->calib);
+ priv->calib = NULL;
+}
+
+static int tda998x_cec_hook_open(void *data)
+{
+ struct tda998x_priv *priv = data;
+
+ cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, true);
+ tda998x_cec_calibration(priv);
+
+ return 0;
+}
+
+static void tda998x_cec_hook_release(void *data)
+{
+ struct tda998x_priv *priv = data;
+
+ cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, false);
+}
+
static int
set_page(struct tda998x_priv *priv, u16 reg)
{
@@ -657,10 +780,13 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
sta, cec, lvl, flag0, flag1, flag2);
if (cec & CEC_RXSHPDINT_HPD) {
- if (lvl & CEC_RXSHPDLEV_HPD)
+ if (lvl & CEC_RXSHPDLEV_HPD) {
tda998x_edid_delay_start(priv);
- else
+ } else {
schedule_work(&priv->detect_work);
+ cec_notifier_set_phys_addr(priv->cec_notify,
+ CEC_PHYS_ADDR_INVALID);
+ }
handled = true;
}
@@ -981,6 +1107,8 @@ static int tda998x_connector_fill_modes(struct
drm_connector *connector,
if (connector->edid_blob_ptr) {
struct edid *edid = (void *)connector->edid_blob_ptr->data;
+ cec_notifier_set_phys_addr_from_edid(priv->cec_notify, edid);
+
priv->sink_has_audio = drm_detect_monitor_audio(edid);
} else {
priv->sink_has_audio = false;
@@ -1024,6 +1152,8 @@ static int read_edid_block(void *data, u8 *buf, unsigned
int blk, size_t length)
offset = (blk & 1) ? 128 : 0;
segptr = blk / 2;
+ mutex_lock(&priv->edid_mutex);
+
reg_write(priv, REG_DDC_ADDR, 0xa0);
reg_write(priv, REG_DDC_OFFS, offset);
reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
@@ -1043,14 +1173,15 @@ static int read_edid_block(void *data, u8 *buf,
unsigned int blk, size_t length)
msecs_to_jiffies(100));
if (i < 0) {
dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
- return i;
+ ret = i;
+ goto failed;
}
} else {
for (i = 100; i > 0; i--) {
msleep(1);
ret = reg_read(priv, REG_INT_FLAGS_2);
if (ret < 0)
- return ret;
+ goto failed;
if (ret & INT_FLAGS_2_EDID_BLK_RD)
break;
}
@@ -1058,17 +1189,22 @@ static int read_edid_block(void *data, u8 *buf,
unsigned int blk, size_t length)
if (i == 0) {
dev_err(&priv->hdmi->dev, "read edid timeout\n");
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto failed;
}
ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
if (ret != length) {
dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
blk, ret);
- return ret;
+ goto failed;
}
- return 0;
+ ret = 0;
+
+ failed:
+ mutex_unlock(&priv->edid_mutex);
+ return ret;
}
static int tda998x_connector_get_modes(struct drm_connector *connector)
@@ -1423,6 +1559,9 @@ static void tda998x_destroy(struct tda998x_priv *priv)
cancel_work_sync(&priv->detect_work);
i2c_unregister_device(priv->cec);
+
+ if (priv->cec_notify)
+ cec_notifier_put(priv->cec_notify);
}
/* I2C driver functions */
@@ -1472,11 +1611,13 @@ static int tda998x_get_audio_ports(struct tda998x_priv
*priv,
static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
{
struct device_node *np = client->dev.of_node;
+ struct i2c_board_info cec_info;
u32 video;
int rev_lo, rev_hi, ret;
mutex_init(&priv->mutex); /* protect the page access */
mutex_init(&priv->audio_mutex); /* protect access from audio thread */
+ mutex_init(&priv->edid_mutex);
init_waitqueue_head(&priv->edid_delay_waitq);
timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
INIT_WORK(&priv->detect_work, tda998x_detect_work);
@@ -1564,6 +1705,9 @@ static int tda998x_create(struct i2c_client *client,
struct tda998x_priv *priv)
irq_flags =
irqd_get_trigger_type(irq_get_irq_data(client->irq));
+
+ priv->cec_glue.irq_flags = irq_flags;
+
irq_flags |= IRQF_SHARED | IRQF_ONESHOT;
ret = request_threaded_irq(client->irq, NULL,
tda998x_irq_thread, irq_flags,
@@ -1579,7 +1723,34 @@ static int tda998x_create(struct i2c_client *client,
struct tda998x_priv *priv)
cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
}
- priv->cec = i2c_new_dummy(client->adapter, priv->cec_addr);
+ priv->cec_notify = cec_notifier_get(&client->dev);
+ if (!priv->cec_notify) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ priv->cec_glue.parent = &client->dev;
+ priv->cec_glue.data = priv;
+ priv->cec_glue.init = tda998x_cec_hook_init;
+ priv->cec_glue.exit = tda998x_cec_hook_exit;
+ priv->cec_glue.open = tda998x_cec_hook_open;
+ priv->cec_glue.release = tda998x_cec_hook_release;
+
+ /*
+ * Some TDA998x are actually two I2C devices merged onto one piece
+ * of silicon: TDA9989 and TDA19989 combine the HDMI transmitter
+ * with a slightly modified TDA9950 CEC device. The CEC device
+ * is at the TDA9950 address, with the address pins strapped across
+ * to the TDA998x address pins. Hence, it always has the same
+ * offset.
+ */
+ memset(&cec_info, 0, sizeof(cec_info));
+ strlcpy(cec_info.type, "tda9950", sizeof(cec_info.type));
+ cec_info.addr = priv->cec_addr;
+ cec_info.platform_data = &priv->cec_glue;
+ cec_info.irq = client->irq;
+
+ priv->cec = i2c_new_device(client->adapter, &cec_info);
if (!priv->cec) {
ret = -ENODEV;
goto fail;
@@ -1609,10 +1780,16 @@ static int tda998x_create(struct i2c_client *client,
struct tda998x_priv *priv)
return 0;
fail:
+ /* if encoder_init fails, the encoder slave is never registered,
+ * so cleanup here:
+ */
+ if (priv->cec)
+ i2c_unregister_device(priv->cec);
+ if (priv->cec_notify)
+ cec_notifier_put(priv->cec_notify);
if (client->irq)
free_irq(client->irq, priv);
err_irq:
- i2c_unregister_device(priv->cec);
return ret;
}
--
2.7.4
