Hi Matthias,

On 2018-04-23 12:50, Brad Love wrote:
> Hi Matthias,
>
>
>
> On 2018-04-19 12:10, Matthias Schwarzott wrote:
>> Am 17.04.2018 um 18:39 schrieb Brad Love:
>>> Replace all usage of hard coded values with
>>> the proper field from the board profile.
>>>
>> Hi Brad,
>>
>> will there be any interference with the usage to configure the analog
>> tuner via the fields tuner_addr and tuner_type?
>>
>> Regards
>> Matthias
>
> I expanded the patch and reviewed each change.
>
> - CX231XX_BOARD_CNXT_RDE_253S : constant equals tuner_addr
> - CX231XX_BOARD_CNXT_RDU_253S : constant equals tuner_addr
> - CX231XX_BOARD_KWORLD_UB445_USB_HYBRID : constant equals tuner_addr
> - CX231XX_BOARD_HAUPPAUGE_EXETER : constant equals tuner_addr
> - CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx : constant equals tuner_addr
> - CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx : constant equals tuner_addr
> - CX231XX_BOARD_HAUPPAUGE_955Q : constant equals tuner_addr
> - CX231XX_BOARD_PV_PLAYTV_USB_HYBRID : constant equals tuner_addr
> - CX231XX_BOARD_KWORLD_UB430_USB_HYBRID : constant equals tuner_addr
>
>
> In all cases above I believe there should be no change in value used or
> behaviour, since the values are equal.
>
> I have tested the 955Q (no tuner_type analog though) well with this set.
> I will ask if someone in the main office can test one of these two:
> - CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx
> - CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
>
> to verify everything is still fine with the analog tuner_type setup on
> them after these changes.
>
> Cheers,
>
> Brad


A CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx was found and anlaog ch3/4 PAL
was tested. The TDA18271 still worked correctly and had no problem
finding the signal. I think this patch is quite benign and just removes
constants. I'm pushing up a v2 in a bit with this patch left as is, and
the i2c helper set updated.

Cheers,

Brad



>
>
>>> Signed-off-by: Brad Love <b...@nextdimension.cc>
>>> ---
>>>  drivers/media/usb/cx231xx/cx231xx-dvb.c | 19 +++++++++----------
>>>  1 file changed, 9 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c 
>>> b/drivers/media/usb/cx231xx/cx231xx-dvb.c
>>> index 67ed667..99f1a77 100644
>>> --- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
>>> +++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
>>> @@ -728,7 +728,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             dvb->frontend[0]->callback = cx231xx_tuner_callback;
>>>  
>>>             if (!dvb_attach(tda18271_attach, dev->dvb->frontend[0],
>>> -                          0x60, tuner_i2c,
>>> +                          dev->board.tuner_addr, tuner_i2c,
>>>                            &cnxt_rde253s_tunerconfig)) {
>>>                     result = -EINVAL;
>>>                     goto out_free;
>>> @@ -752,7 +752,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             dvb->frontend[0]->callback = cx231xx_tuner_callback;
>>>  
>>>             if (!dvb_attach(tda18271_attach, dev->dvb->frontend[0],
>>> -                          0x60, tuner_i2c,
>>> +                          dev->board.tuner_addr, tuner_i2c,
>>>                            &cnxt_rde253s_tunerconfig)) {
>>>                     result = -EINVAL;
>>>                     goto out_free;
>>> @@ -779,7 +779,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             dvb->frontend[0]->callback = cx231xx_tuner_callback;
>>>  
>>>             dvb_attach(tda18271_attach, dev->dvb->frontend[0],
>>> -                      0x60, tuner_i2c,
>>> +                      dev->board.tuner_addr, tuner_i2c,
>>>                        &hcw_tda18271_config);
>>>             break;
>>>  
>>> @@ -797,7 +797,7 @@ static int dvb_init(struct cx231xx *dev)
>>>  
>>>             memset(&info, 0, sizeof(struct i2c_board_info));
>>>             strlcpy(info.type, "si2165", I2C_NAME_SIZE);
>>> -           info.addr = 0x64;
>>> +           info.addr = dev->board.demod_addr;
>>>             info.platform_data = &si2165_pdata;
>>>             request_module(info.type);
>>>             client = i2c_new_device(demod_i2c, &info);
>>> @@ -822,8 +822,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             dvb->frontend[0]->callback = cx231xx_tuner_callback;
>>>  
>>>             dvb_attach(tda18271_attach, dev->dvb->frontend[0],
>>> -                   0x60,
>>> -                   tuner_i2c,
>>> +                   dev->board.tuner_addr, tuner_i2c,
>>>                     &hcw_tda18271_config);
>>>  
>>>             dev->cx231xx_reset_analog_tuner = NULL;
>>> @@ -844,7 +843,7 @@ static int dvb_init(struct cx231xx *dev)
>>>  
>>>             memset(&info, 0, sizeof(struct i2c_board_info));
>>>             strlcpy(info.type, "si2165", I2C_NAME_SIZE);
>>> -           info.addr = 0x64;
>>> +           info.addr = dev->board.demod_addr;
>>>             info.platform_data = &si2165_pdata;
>>>             request_module(info.type);
>>>             client = i2c_new_device(demod_i2c, &info);
>>> @@ -879,7 +878,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             si2157_config.if_port = 1;
>>>             si2157_config.inversion = true;
>>>             strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>>> -           info.addr = 0x60;
>>> +           info.addr = dev->board.tuner_addr;
>>>             info.platform_data = &si2157_config;
>>>             request_module("si2157");
>>>  
>>> @@ -938,7 +937,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             si2157_config.if_port = 1;
>>>             si2157_config.inversion = true;
>>>             strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>>> -           info.addr = 0x60;
>>> +           info.addr = dev->board.tuner_addr;
>>>             info.platform_data = &si2157_config;
>>>             request_module("si2157");
>>>  
>>> @@ -985,7 +984,7 @@ static int dvb_init(struct cx231xx *dev)
>>>             dvb->frontend[0]->callback = cx231xx_tuner_callback;
>>>  
>>>             dvb_attach(tda18271_attach, dev->dvb->frontend[0],
>>> -                      0x60, tuner_i2c,
>>> +                      dev->board.tuner_addr, tuner_i2c,
>>>                        &pv_tda18271_config);
>>>             break;
>>>  
>>>
>

Reply via email to