On 24/05/18 17:09, Ondrej Zary wrote:
> Power line frequency settings for OV7648 sensor contain autogain
> and exposure commands, affecting unrelated controls. Remove them.
>
> Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
> ---
> drivers/media/usb/gspca/zc3xx.c | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c
> index 992918b3ad0c..9a78420e8ad8 100644
> --- a/drivers/media/usb/gspca/zc3xx.c
> +++ b/drivers/media/usb/gspca/zc3xx.c
> @@ -3184,7 +3184,8 @@ static const struct usb_action ov7620_InitialScale[] =
> { /* 320x240 */
> {}
> };
> static const struct usb_action ov7620_50HZ[] = {
> - {0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
> +/* {0xaa, 0x13, 0x00a3}, * 00,13,a3,aa
> + * don't change autoexposure */
> {0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
> {0xaa, 0x2b, 0x0096}, /* 00,2b,96,aa */
> {0xaa, 0x75, 0x008a}, /* 00,75,8a,aa */
Just remove these lines altogether. There are still present in the git history
if they are ever needed again. Same for the next patch.
Regards,
Hans
> @@ -3195,15 +3196,16 @@ static const struct usb_action ov7620_50HZ[] = {
> {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
> {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
> {0xa0, 0x83, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,83,cc */
> - {0xaa, 0x10, 0x0082}, /* 00,10,82,aa */
> +/* {0xaa, 0x10, 0x0082}, * 00,10,82,aa
> + * don't change exposure */
> {0xaa, 0x76, 0x0003}, /* 00,76,03,aa */
> /* {0xa0, 0x40, ZC3XX_R002_CLOCKSELECT}, * 00,02,40,cc
> * if mode0 (640x480) */
> {}
> };
> static const struct usb_action ov7620_60HZ[] = {
> - {0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
> - /* (bug in zs211.inf) */
> +/* {0xaa, 0x13, 0x00a3}, * 00,13,a3,aa
> + * don't change autoexposure */
> {0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
> {0xaa, 0x2b, 0x0000}, /* 00,2b,00,aa */
> {0xaa, 0x75, 0x008a}, /* 00,75,8a,aa */
> @@ -3214,7 +3216,8 @@ static const struct usb_action ov7620_60HZ[] = {
> {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
> {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
> {0xa0, 0x83, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,83,cc */
> - {0xaa, 0x10, 0x0020}, /* 00,10,20,aa */
> +/* {0xaa, 0x10, 0x0020}, * 00,10,20,aa
> + * don't change exposure */
> {0xaa, 0x76, 0x0003}, /* 00,76,03,aa */
> /* {0xa0, 0x40, ZC3XX_R002_CLOCKSELECT}, * 00,02,40,cc
> * if mode0 (640x480) */
> @@ -3224,8 +3227,8 @@ static const struct usb_action ov7620_60HZ[] = {
> {}
> };
> static const struct usb_action ov7620_NoFliker[] = {
> - {0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
> - /* (bug in zs211.inf) */
> +/* {0xaa, 0x13, 0x00a3}, * 00,13,a3,aa
> + * don't change autoexposure */
> {0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
> {0xaa, 0x2b, 0x0000}, /* 00,2b,00,aa */
> {0xaa, 0x75, 0x008e}, /* 00,75,8e,aa */
>
