The a->index is not the name of the internal amux entry,
but, instead a value from zero to the maximum number
of audio inputs.
As the actual available inputs depend on each board, build
it dynamically.
Signed-off-by: Mauro Carvalho Chehab <mchehab+sams...@kernel.org>
---
drivers/media/usb/em28xx/em28xx-cards.c | 29 +++++++++
drivers/media/usb/em28xx/em28xx-video.c | 83 ++++++++++++++++++++++---
drivers/media/usb/em28xx/em28xx.h | 8 ++-
3 files changed, 111 insertions(+), 9 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
b/drivers/media/usb/em28xx/em28xx-cards.c
index 71c829f31d3b..e9ab1fbc8f0d 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3039,6 +3039,9 @@ static int em28xx_hint_board(struct em28xx *dev)
static void em28xx_card_setup(struct em28xx *dev)
{
+ int i, j, idx;
+ bool duplicate_entry;
+
/*
* If the device can be a webcam, seek for a sensor.
* If sensor is not found, then it isn't a webcam.
@@ -3195,6 +3198,32 @@ static void em28xx_card_setup(struct em28xx *dev)
/* Allow override tuner type by a module parameter */
if (tuner >= 0)
dev->tuner_type = tuner;
+
+ /*
+ * Dynamically generate a list of valid audio inputs for this
+ * specific board, mapping them via enum em28xx_amux.
+ */
+
+ idx = 0;
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ if (!INPUT(i)->type)
+ continue;
+
+ /* Skip already mapped audio inputs */
+ duplicate_entry = false;
+ for (j = 0; j < idx; j++) {
+ if (INPUT(i)->amux == dev->amux_map[j]) {
+ duplicate_entry = true;
+ break;
+ }
+ }
+ if (duplicate_entry)
+ continue;
+
+ dev->amux_map[idx++] = INPUT(i)->amux;
+ }
+ for (;idx < MAX_EM28XX_INPUT; idx++)
+ dev->amux_map[idx] = EM28XX_AMUX_UNUSED;
}
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
diff --git a/drivers/media/usb/em28xx/em28xx-video.c
b/drivers/media/usb/em28xx/em28xx-video.c
index 917602954bfb..fcb5c1b25ab3 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -1666,6 +1666,7 @@ static int vidioc_enum_input(struct file *file, void
*priv,
{
struct em28xx *dev = video_drvdata(file);
unsigned int n;
+ int j;
n = i->index;
if (n >= MAX_EM28XX_INPUT)
@@ -1685,6 +1686,12 @@ static int vidioc_enum_input(struct file *file, void
*priv,
if (dev->is_webcam)
i->capabilities = 0;
+ /* Dynamically generates an audioset bitmask */
+ i->audioset = 0;
+ for (j = 0; j < MAX_EM28XX_INPUT; j++)
+ if (dev->amux_map[j] != EM28XX_AMUX_UNUSED)
+ i->audioset |= 1 << j;
+
return 0;
}
@@ -1710,11 +1717,25 @@ static int vidioc_s_input(struct file *file, void
*priv, unsigned int i)
return 0;
}
-static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+
+static int em28xx_fill_audio_input(struct em28xx *dev,
+ const char *s,
+ struct v4l2_audio *a,
+ unsigned index)
{
- struct em28xx *dev = video_drvdata(file);
+ unsigned int idx = dev->amux_map[index];
- switch (a->index) {
+ /*
+ * With msp3400, almost all mappings use the default (amux = 0).
+ * The only one may use a different value is WinTV USB2, where it
+ * can also be SCART1 input.
+ * As it is very doubtful that we would see new boards with msp3400,
+ * let's just reuse the existing switch.
+ */
+ if (dev->has_msp34xx && idx != EM28XX_AMUX_UNUSED)
+ idx = EM28XX_AMUX_LINE_IN;
+
+ switch (idx) {
case EM28XX_AMUX_VIDEO:
strscpy(a->name, "Television", sizeof(a->name));
break;
@@ -1739,32 +1760,77 @@ static int vidioc_g_audio(struct file *file, void
*priv, struct v4l2_audio *a)
case EM28XX_AMUX_PCM_OUT:
strscpy(a->name, "PCM", sizeof(a->name));
break;
+ case EM28XX_AMUX_UNUSED:
default:
return -EINVAL;
}
-
- a->index = dev->ctl_ainput;
+ a->index = index;
a->capability = V4L2_AUDCAP_STEREO;
+ em28xx_videodbg("%s: audio input index %d is '%s'\n", s, a->index,
a->name);
+
return 0;
}
+static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+ struct em28xx *dev = video_drvdata(file);
+
+ if (a->index >= MAX_EM28XX_INPUT)
+ return -EINVAL;
+
+ return em28xx_fill_audio_input(dev, __func__,a, a->index);
+}
+
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+ struct em28xx *dev = video_drvdata(file);
+ int i;
+
+ for (i = 0; i < MAX_EM28XX_INPUT; i++)
+ if (dev->ctl_ainput == dev->amux_map[i])
+ return em28xx_fill_audio_input(dev, __func__, a, i);
+
+ /* Should never happen! */
+ return -EINVAL;
+}
+
static int vidioc_s_audio(struct file *file, void *priv,
const struct v4l2_audio *a)
{
struct em28xx *dev = video_drvdata(file);
+ int idx, i;
if (a->index >= MAX_EM28XX_INPUT)
return -EINVAL;
- if (!INPUT(a->index)->type)
+
+ idx = dev->amux_map[a->index];
+
+ if (idx == EM28XX_AMUX_UNUSED)
+ return -EINVAL;
+
+ dev->ctl_ainput = idx;
+
+ /*
+ * FIXME: This is wrong, as different inputs at em28xx_cards
+ * may have different audio outputs. So, the right thing
+ * to do is to implement VIDIOC_G_AUDOUT/VIDIOC_S_AUDOUT.
+ * With the current board definitions, this would work fine,
+ * as, currently, all boards fit.
+ */
+ for (i = 0; i < MAX_EM28XX_INPUT; i++)
+ if (idx == dev->amux_map[i])
+ break;
+ if (i == MAX_EM28XX_INPUT)
return -EINVAL;
- dev->ctl_ainput = INPUT(a->index)->amux;
- dev->ctl_aoutput = INPUT(a->index)->aout;
+ dev->ctl_aoutput = INPUT(i)->aout;
if (!dev->ctl_aoutput)
dev->ctl_aoutput = EM28XX_AOUT_MASTER;
+ em28xx_videodbg("%s: set audio input to %d\n", __func__,
dev->ctl_ainput);
+
return 0;
}
@@ -2302,6 +2368,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_try_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_enum_framesizes = vidioc_enum_framesizes,
+ .vidioc_enumaudio = vidioc_enumaudio,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
diff --git a/drivers/media/usb/em28xx/em28xx.h
b/drivers/media/usb/em28xx/em28xx.h
index 953caac025f2..a551072e62ed 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -335,6 +335,9 @@ enum em28xx_usb_audio_type {
/**
* em28xx_amux - describes the type of audio input used by em28xx
*
+ * @EM28XX_AMUX_UNUSED:
+ * Used only on em28xx dev->map field, in order to mark an entry
+ * as unused.
* @EM28XX_AMUX_VIDEO:
* On devices without AC97, this is the only value that it is currently
* allowed.
@@ -369,7 +372,8 @@ enum em28xx_usb_audio_type {
* same time, via the alsa mux.
*/
enum em28xx_amux {
- EM28XX_AMUX_VIDEO,
+ EM28XX_AMUX_UNUSED = -1,
+ EM28XX_AMUX_VIDEO = 0,
EM28XX_AMUX_LINE_IN,
/* Some less-common mixer setups */
@@ -692,6 +696,8 @@ struct em28xx {
unsigned int ctl_input; // selected input
unsigned int ctl_ainput;// selected audio input
unsigned int ctl_aoutput;// selected audio output
+ enum em28xx_amux amux_map[MAX_EM28XX_INPUT];
+
int mute;
int volume;
--
2.17.1
