Mauro, I know you are busy, but this patch is sitting too long for merge and require your service. Could you at least respond to my email with your plan so that I can work on the next patch set for your merge.
Thanks and regards, Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com >-----Original Message----- >From: davinci-linux-open-source-boun...@linux.davincidsp.com >[mailto:davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf >Of Karicheri, Muralidharan >Sent: Thursday, January 14, 2010 4:24 PM >To: mche...@infradead.org >Cc: davinci-linux-open-sou...@linux.davincidsp.com; mche...@infradead.org; >linux-media@vger.kernel.org >Subject: RE: [PATCH - v4 1/4] V4L - vpfe_capture-remove clock and platform >code > >Mauro, > >Could you add patches 1-3 to linux-next ASAP? > >See the response from Kevin for the arch part. > >Murali Karicheri >Software Design Engineer >Texas Instruments Inc. >Germantown, MD 20874 >phone: 301-407-9583 >email: m-kariche...@ti.com > >>-----Original Message----- >>From: Kevin Hilman [mailto:khil...@deeprootsystems.com] >>Sent: Thursday, January 14, 2010 3:48 PM >>To: Karicheri, Muralidharan >>Cc: linux-media@vger.kernel.org; hverk...@xs4all.nl; >mche...@infradead.org; >>davinci-linux-open-sou...@linux.davincidsp.com >>Subject: Re: [PATCH - v4 1/4] V4L - vpfe_capture-remove clock and platform >>code >> >>"Karicheri, Muralidharan" <m-kariche...@ti.com> writes: >> >>> Mauro, >>> >>> Please merge this patches if there are no more comments. >>> >>> Kevin, >>> >>> Could you work with Mauro to merge the arch part as required? >>> >> >>This version looks good with me. >> >>I'll assume that these are targed for 2.6.34, not 2.6.33-rc fixes window. >> >>These appear to be able at least compile independently, so as soon as >>Mauro/Hans sign-off on them, I willll add PATCH 4/4 to davinci-next so >>it will be queued for 2.6.34 and be a part of linux-next. >> >>Mauro can queue patches 1-3 in his queue for 2.6.34. They will both >>be in linux-next for testing. >> >>Also, I can *temporarily* add patches 1-3 to davinci git so davinci git >>will have them all while waiting for 2.6.34 merge window. I will then >>drop them when Mauro's tree merges upstream. >> >>Kevin >> >>> Murali Karicheri >>> Software Design Engineer >>> Texas Instruments Inc. >>> Germantown, MD 20874 >>> phone: 301-407-9583 >>> email: m-kariche...@ti.com >>> >>>>-----Original Message----- >>>>From: Karicheri, Muralidharan >>>>Sent: Wednesday, January 13, 2010 6:27 PM >>>>To: linux-media@vger.kernel.org; hverk...@xs4all.nl; >>>>khil...@deeprootsystems.com; mche...@infradead.org >>>>Cc: davinci-linux-open-sou...@linux.davincidsp.com; Karicheri, >>Muralidharan >>>>Subject: [PATCH - v4 1/4] V4L - vpfe_capture-remove clock and platform >>code >>>> >>>>From: Muralidharan Karicheri <m-kariche...@ti.com> >>>> >>>>Following changes are done in this patch:- >>>> 1) removed the platform code and clk configuration. They are now >>>> part of ccdc driver (part of the ccdc patches and platform >>>>patches 2-4) >>>> 2) Added proper error codes for ccdc register function >>>> >>>>Reviewed-by: Vaibhav Hiremath <hvaib...@ti.com> >>>>Reviewed-by: Kevin Hilman <khil...@deeprootsystems.com> >>>>Reviewed-by: Hans Verkuil <hverk...@xs4all.nl> >>>> >>>>Signed-off-by: Hans Verkuil <hverk...@xs4all.nl> >>>>Signed-off-by: Muralidharan Karicheri <m-kariche...@ti.com> >>>>--- >>>>Rebased to latest linux-next tree of v4l-dvb >>>>This combines the two patches sent earlier to change the clock >>>>configuration >>>>and converting ccdc drivers to platform drivers. This has updated >>comments >>>>against v1 of these patches. >>>> >>>> drivers/media/video/davinci/vpfe_capture.c | 131 +++------------------ >- >>-- >>>>---- >>>> 1 files changed, 13 insertions(+), 118 deletions(-) >>>> >>>>diff --git a/drivers/media/video/davinci/vpfe_capture.c >>>>b/drivers/media/video/davinci/vpfe_capture.c >>>>index de22bc9..885cd54 100644 >>>>--- a/drivers/media/video/davinci/vpfe_capture.c >>>>+++ b/drivers/media/video/davinci/vpfe_capture.c >>>>@@ -107,9 +107,6 @@ struct ccdc_config { >>>> int vpfe_probed; >>>> /* name of ccdc device */ >>>> char name[32]; >>>>- /* for storing mem maps for CCDC */ >>>>- int ccdc_addr_size; >>>>- void *__iomem ccdc_addr; >>>> }; >>>> >>>> /* data structures */ >>>>@@ -229,7 +226,6 @@ int vpfe_register_ccdc_device(struct ccdc_hw_device >>>>*dev) >>>> BUG_ON(!dev->hw_ops.set_image_window); >>>> BUG_ON(!dev->hw_ops.get_image_window); >>>> BUG_ON(!dev->hw_ops.get_line_length); >>>>- BUG_ON(!dev->hw_ops.setfbaddr); >>>> BUG_ON(!dev->hw_ops.getfid); >>>> >>>> mutex_lock(&ccdc_lock); >>>>@@ -240,25 +236,23 @@ int vpfe_register_ccdc_device(struct >ccdc_hw_device >>>>*dev) >>>> * walk through it during vpfe probe >>>> */ >>>> printk(KERN_ERR "vpfe capture not initialized\n"); >>>>- ret = -1; >>>>+ ret = -EFAULT; >>>> goto unlock; >>>> } >>>> >>>> if (strcmp(dev->name, ccdc_cfg->name)) { >>>> /* ignore this ccdc */ >>>>- ret = -1; >>>>+ ret = -EINVAL; >>>> goto unlock; >>>> } >>>> >>>> if (ccdc_dev) { >>>> printk(KERN_ERR "ccdc already registered\n"); >>>>- ret = -1; >>>>+ ret = -EINVAL; >>>> goto unlock; >>>> } >>>> >>>> ccdc_dev = dev; >>>>- dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr, >>>>- ccdc_cfg->ccdc_addr_size); >>>> unlock: >>>> mutex_unlock(&ccdc_lock); >>>> return ret; >>>>@@ -1786,61 +1780,6 @@ static struct vpfe_device *vpfe_initialize(void) >>>> return vpfe_dev; >>>> } >>>> >>>>-static void vpfe_disable_clock(struct vpfe_device *vpfe_dev) >>>>-{ >>>>- struct vpfe_config *vpfe_cfg = vpfe_dev->cfg; >>>>- >>>>- clk_disable(vpfe_cfg->vpssclk); >>>>- clk_put(vpfe_cfg->vpssclk); >>>>- clk_disable(vpfe_cfg->slaveclk); >>>>- clk_put(vpfe_cfg->slaveclk); >>>>- v4l2_info(vpfe_dev->pdev->driver, >>>>- "vpfe vpss master & slave clocks disabled\n"); >>>>-} >>>>- >>>>-static int vpfe_enable_clock(struct vpfe_device *vpfe_dev) >>>>-{ >>>>- struct vpfe_config *vpfe_cfg = vpfe_dev->cfg; >>>>- int ret = -ENOENT; >>>>- >>>>- vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master"); >>>>- if (NULL == vpfe_cfg->vpssclk) { >>>>- v4l2_err(vpfe_dev->pdev->driver, "No clock defined for" >>>>- "vpss_master\n"); >>>>- return ret; >>>>- } >>>>- >>>>- if (clk_enable(vpfe_cfg->vpssclk)) { >>>>- v4l2_err(vpfe_dev->pdev->driver, >>>>- "vpfe vpss master clock not enabled\n"); >>>>- goto out; >>>>- } >>>>- v4l2_info(vpfe_dev->pdev->driver, >>>>- "vpfe vpss master clock enabled\n"); >>>>- >>>>- vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave"); >>>>- if (NULL == vpfe_cfg->slaveclk) { >>>>- v4l2_err(vpfe_dev->pdev->driver, >>>>- "No clock defined for vpss slave\n"); >>>>- goto out; >>>>- } >>>>- >>>>- if (clk_enable(vpfe_cfg->slaveclk)) { >>>>- v4l2_err(vpfe_dev->pdev->driver, >>>>- "vpfe vpss slave clock not enabled\n"); >>>>- goto out; >>>>- } >>>>- v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n"); >>>>- return 0; >>>>-out: >>>>- if (vpfe_cfg->vpssclk) >>>>- clk_put(vpfe_cfg->vpssclk); >>>>- if (vpfe_cfg->slaveclk) >>>>- clk_put(vpfe_cfg->slaveclk); >>>>- >>>>- return -1; >>>>-} >>>>- >>>> /* >>>> * vpfe_probe : This function creates device entries by register >>>> * itself to the V4L2 driver and initializes fields of each >>>>@@ -1870,7 +1809,7 @@ static __init int vpfe_probe(struct >platform_device >>>>*pdev) >>>> >>>> if (NULL == pdev->dev.platform_data) { >>>> v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); >>>>- ret = -ENOENT; >>>>+ ret = -ENODEV; >>>> goto probe_free_dev_mem; >>>> } >>>> >>>>@@ -1884,18 +1823,13 @@ static __init int vpfe_probe(struct >>platform_device >>>>*pdev) >>>> goto probe_free_dev_mem; >>>> } >>>> >>>>- /* enable vpss clocks */ >>>>- ret = vpfe_enable_clock(vpfe_dev); >>>>- if (ret) >>>>- goto probe_free_dev_mem; >>>>- >>>> mutex_lock(&ccdc_lock); >>>> /* Allocate memory for ccdc configuration */ >>>> ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); >>>> if (NULL == ccdc_cfg) { >>>> v4l2_err(pdev->dev.driver, >>>> "Memory allocation failed for ccdc_cfg\n"); >>>>- goto probe_disable_clock; >>>>+ goto probe_free_dev_mem; >>>> } >>>> >>>> strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); >>>>@@ -1904,61 +1838,34 @@ static __init int vpfe_probe(struct >>platform_device >>>>*pdev) >>>> if (!res1) { >>>> v4l2_err(pdev->dev.driver, >>>> "Unable to get interrupt for VINT0\n"); >>>>- ret = -ENOENT; >>>>- goto probe_disable_clock; >>>>+ ret = -ENODEV; >>>>+ goto probe_free_ccdc_cfg_mem; >>>> } >>>> vpfe_dev->ccdc_irq0 = res1->start; >>>> >>>> /* Get VINT1 irq resource */ >>>>- res1 = platform_get_resource(pdev, >>>>- IORESOURCE_IRQ, 1); >>>>+ res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); >>>> if (!res1) { >>>> v4l2_err(pdev->dev.driver, >>>> "Unable to get interrupt for VINT1\n"); >>>>- ret = -ENOENT; >>>>- goto probe_disable_clock; >>>>+ ret = -ENODEV; >>>>+ goto probe_free_ccdc_cfg_mem; >>>> } >>>> vpfe_dev->ccdc_irq1 = res1->start; >>>> >>>>- /* Get address base of CCDC */ >>>>- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>>>- if (!res1) { >>>>- v4l2_err(pdev->dev.driver, >>>>- "Unable to get register address map\n"); >>>>- ret = -ENOENT; >>>>- goto probe_disable_clock; >>>>- } >>>>- >>>>- ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1; >>>>- if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size, >>>>- pdev->dev.driver->name)) { >>>>- v4l2_err(pdev->dev.driver, >>>>- "Failed request_mem_region for ccdc base\n"); >>>>- ret = -ENXIO; >>>>- goto probe_disable_clock; >>>>- } >>>>- ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start, >>>>- ccdc_cfg->ccdc_addr_size); >>>>- if (!ccdc_cfg->ccdc_addr) { >>>>- v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n"); >>>>- ret = -ENXIO; >>>>- goto probe_out_release_mem1; >>>>- } >>>>- >>>> ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED, >>>> "vpfe_capture0", vpfe_dev); >>>> >>>> if (0 != ret) { >>>> v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); >>>>- goto probe_out_unmap1; >>>>+ goto probe_free_ccdc_cfg_mem; >>>> } >>>> >>>> /* Allocate memory for video device */ >>>> vfd = video_device_alloc(); >>>> if (NULL == vfd) { >>>> ret = -ENOMEM; >>>>- v4l2_err(pdev->dev.driver, >>>>- "Unable to alloc video device\n"); >>>>+ v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); >>>> goto probe_out_release_irq; >>>> } >>>> >>>>@@ -2073,12 +1980,7 @@ probe_out_video_release: >>>> video_device_release(vpfe_dev->video_dev); >>>> probe_out_release_irq: >>>> free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); >>>>-probe_out_unmap1: >>>>- iounmap(ccdc_cfg->ccdc_addr); >>>>-probe_out_release_mem1: >>>>- release_mem_region(res1->start, res1->end - res1->start + 1); >>>>-probe_disable_clock: >>>>- vpfe_disable_clock(vpfe_dev); >>>>+probe_free_ccdc_cfg_mem: >>>> mutex_unlock(&ccdc_lock); >>>> kfree(ccdc_cfg); >>>> probe_free_dev_mem: >>>>@@ -2092,7 +1994,6 @@ probe_free_dev_mem: >>>> static int __devexit vpfe_remove(struct platform_device *pdev) >>>> { >>>> struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); >>>>- struct resource *res; >>>> >>>> v4l2_info(pdev->dev.driver, "vpfe_remove\n"); >>>> >>>>@@ -2100,12 +2001,6 @@ static int __devexit vpfe_remove(struct >>>>platform_device *pdev) >>>> kfree(vpfe_dev->sd); >>>> v4l2_device_unregister(&vpfe_dev->v4l2_dev); >>>> video_unregister_device(vpfe_dev->video_dev); >>>>- mutex_lock(&ccdc_lock); >>>>- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>>>- release_mem_region(res->start, res->end - res->start + 1); >>>>- iounmap(ccdc_cfg->ccdc_addr); >>>>- mutex_unlock(&ccdc_lock); >>>>- vpfe_disable_clock(vpfe_dev); >>>> kfree(vpfe_dev); >>>> kfree(ccdc_cfg); >>>> return 0; >>>>-- >>>>1.6.0.4 >_______________________________________________ >Davinci-linux-open-source mailing list >davinci-linux-open-sou...@linux.davincidsp.com >http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
