HoP wrote:
> Hi Mauro,
>
> Not to hassle you, I'm sure you're very busy.
>
> But I'm not yet received a response from you on mail with corrected patch.
>
> Your attention would be appreciated
Hi Honza,
The patch looks correct to me, but, as I previously mentioned, our policy is
to add new features at the kernel driver only together with a driver that
actually requires it. This helps to avoid increasing the kernel without need.
So, please re-submit it when you have your driver requiring the isl6421
changes ready for submission, on the same patch series.
Cheers,
Mauro.
>
> Regards
>
> /Honza
>
> 2009/12/16 HoP <jpetr...@gmail.com>:
>> Hi Mauro,
>>
>> 2009/12/15 Mauro Carvalho Chehab <mche...@redhat.com>:
>> [snip]
>>
>>> I'm still missing a driver or a board entry that requires those
>>> changes. Could you please send it together with this patch series?
>>>
>> We are using it in our project. Currently we are in very early
>> stage of it. We still have some serious issue, what not allows
>> us sending such code for mainlining.
>>
>> Anyway, I don't think it can block accepting current patchset.
>> Isl6421 driver is already in tree, we only want to add some
>> features, which can be or can not be interesting for others.
>>
>> I believe extending of usability of current drivers is correct
>> way.
>>
>>> Also, you forgot to send your Signed-off-By. This is required for
>>> patch submission.
>>>
>>>> Regards
>>>>
>>>> /Honza
>>>>
>>>> ---
>>>>
>>>> isl6421.c - added tone control and temporary diseqc overcurrent
>>> Please, always send patches in-lined. makes easier for commenting.
>>>
>> OK.
>>
>>>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
>>>> --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Mon Dec 14 17:43:13
>>>> 2009 -0200
>>>> +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Tue Dec 15 16:36:14
>>>> 2009 +0100
>>>> @@ -302,6 +302,12 @@ static struct itd1000_config skystar2_re
>>>> .i2c_address = 0x61,
>>>> };
>>>>
>>>> +static struct isl6421_config skystar2_rev2_7_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = 0x01,
>>>> + .override_clear = 0x01,
>>>> +};
>>>> +
>>>> static int skystar2_rev27_attach(struct flexcop_device *fc,
>>>> struct i2c_adapter *i2c)
>>>> {
>>>> @@ -325,7 +331,7 @@ static int skystar2_rev27_attach(struct
>>>> /* enable no_base_addr - no repeated start when reading */
>>>> fc->fc_i2c_adap[2].no_base_addr = 1;
>>>> if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
>>>> - 0x08, 1, 1)) {
>>>> + &skystar2_rev2_7_isl6421_config)) {
>>>> err("ISL6421 could NOT be attached");
>>>> goto fail_isl;
>>>> }
>>>> @@ -368,6 +374,12 @@ static const struct cx24113_config skyst
>>>> .xtal_khz = 10111,
>>>> };
>>>>
>>>> +static struct isl6421_config skystar2_rev2_8_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = 0x00,
>>>> + .override_clear = 0x00,
>>> Please, do not set any static value to zero. Kernel module support already
>>> does that, and this will just add uneeded stuff into BSS.
>>>
>> Done.
>>
>>>> +};
>>>> +
>>>> static int skystar2_rev28_attach(struct flexcop_device *fc,
>>>> struct i2c_adapter *i2c)
>>>> {
>>>> @@ -391,7 +403,7 @@ static int skystar2_rev28_attach(struct
>>>>
>>>> fc->fc_i2c_adap[2].no_base_addr = 1;
>>>> if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
>>>> - 0x08, 0, 0)) {
>>>> + &skystar2_rev2_8_isl6421_config)) {
>>>> err("ISL6421 could NOT be attached");
>>>> fc->fc_i2c_adap[2].no_base_addr = 0;
>>>> return 0;
>>>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/frontends/isl6421.c
>>>> --- a/linux/drivers/media/dvb/frontends/isl6421.c Mon Dec 14 17:43:13
>>>> 2009 -0200
>>>> +++ b/linux/drivers/media/dvb/frontends/isl6421.c Tue Dec 15 16:36:14
>>>> 2009 +0100
>>>> @@ -3,6 +3,9 @@
>>>> *
>>>> * Copyright (C) 2006 Andrew de Quincey
>>>> * Copyright (C) 2006 Oliver Endriss
>>>> + * Copyright (C) 2009 Ales Jurik and Jan Petrous (added optional 22k tone
>>>> + * support and temporary diseqc overcurrent enable
>>>> until
>>>> + * next command - set voltage or tone)
>>>> *
>>>> * This program is free software; you can redistribute it and/or
>>>> * modify it under the terms of the GNU General Public License
>>>> @@ -36,37 +39,88 @@
>>>> #include "isl6421.h"
>>>>
>>>> struct isl6421 {
>>>> - u8 config;
>>>> - u8 override_or;
>>>> - u8 override_and;
>>>> - struct i2c_adapter *i2c;
>>>> - u8 i2c_addr;
>>>> + const struct isl6421_config *config;
>>>> + u8 reg1;
>>> reg1 seems a very bad name. Based on the datasheet, maybe
>>> you could call it as sys_config or sys_reg_config.
>>>
>> Renamed to sys_reg.
>>
>>>> +
>>>> + struct i2c_adapter *i2c;
>>>> +
>>>> + int (*diseqc_send_master_cmd_orig)(struct dvb_frontend *fe,
>>>> + struct dvb_diseqc_master_cmd *cmd);
>>>> };
>>>>
>>>> static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t
>>>> voltage)
>>>> {
>>>> struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>>>> - struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
>>>> - .buf = &isl6421->config,
>>>> - .len = sizeof(isl6421->config) };
>>>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>>>> 0,
>>>> + .buf = &isl6421->reg1,
>>>> + .len = sizeof(isl6421->reg1) };
>>>>
>>>> - isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
>>>> + isl6421->reg1 &= ~(ISL6421_VSEL1 | ISL6421_EN1);
>>>>
>>>> switch(voltage) {
>>>> case SEC_VOLTAGE_OFF:
>>>> break;
>>>> case SEC_VOLTAGE_13:
>>>> - isl6421->config |= ISL6421_EN1;
>>>> + isl6421->reg1 |= ISL6421_EN1;
>>>> break;
>>>> case SEC_VOLTAGE_18:
>>>> - isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
>>>> + isl6421->reg1 |= (ISL6421_EN1 | ISL6421_VSEL1);
>>>> break;
>>>> default:
>>>> return -EINVAL;
>>>> };
>>>>
>>>> - isl6421->config |= isl6421->override_or;
>>>> - isl6421->config &= isl6421->override_and;
>>>> + isl6421->reg1 |= isl6421->config->override_set;
>>>> + isl6421->reg1 &= ~isl6421->config->override_clear;
>>>> +
>>>> + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>>>> +}
>>>> +
>>>> +static int isl6421_send_diseqc(struct dvb_frontend *fe,
>>>> + struct dvb_diseqc_master_cmd *cmd)
>>> Please add a comment explaining that this function is only called
>>> when diseqc_send_master_cmd_orig() is defined. On a first look, it seemed
>> OK, similar note added.
>>
>>> to me that you would cause a crash by not checking if
>>> diseqc_send_master_cmd_orig()
>>> is not null.
>>>
>> Your are right! Thanks. Fixed.
>>
>>>> +{
>>>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>>>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>>>> 0,
>>>> + .buf = &isl6421->reg1,
>>>> + .len = sizeof(isl6421->reg1) };
>>>> +
>>>> + isl6421->reg1 |= ISL6421_DCL;
>>>> +
>>>> + isl6421->reg1 |= isl6421->config->override_set;
>>>> + isl6421->reg1 &= ~isl6421->config->override_clear;
>>>> +
>>>> + if (i2c_transfer(isl6421->i2c, &msg, 1) != 1)
>>>> + return -EIO;
>>>> +
>>>> + isl6421->reg1 &= ~ISL6421_DCL;
>>>> +
>>>> + return isl6421->diseqc_send_master_cmd_orig(fe, cmd);
>>>> +}
>>>> +
>>>> +static int isl6421_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t
>>>> tone)
>>>> +{
>>>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>>>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>>>> 0,
>>>> + .buf = &isl6421->reg1,
>>>> + .len = sizeof(isl6421->reg1) };
>>>> +
>>>> + isl6421->reg1 &= ~(ISL6421_ENT1);
>>>> +
>>>> + printk(KERN_INFO "%s: %s\n", __func__, ((tone == SEC_TONE_OFF) ?
>>>> + "Off" : "On"));
>>>> +
>>>> + switch (tone) {
>>>> + case SEC_TONE_ON:
>>>> + isl6421->reg1 |= ISL6421_ENT1;
>>>> + break;
>>>> + case SEC_TONE_OFF:
>>>> + break;
>>>> + default:
>>>> + return -EINVAL;
>>>> + };
>>>> +
>>>> + isl6421->reg1 |= isl6421->config->override_set;
>>>> + isl6421->reg1 &= ~isl6421->config->override_clear;
>>>>
>>>> return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>>>> }
>>>> @@ -74,49 +128,52 @@ static int isl6421_enable_high_lnb_volta
>>>> static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long
>>>> arg)
>>>> {
>>>> struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>>>> - struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
>>>> - .buf = &isl6421->config,
>>>> - .len = sizeof(isl6421->config) };
>>>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>>>> 0,
>>>> + .buf = &isl6421->reg1,
>>>> + .len = sizeof(isl6421->reg1) };
>>>>
>>>> if (arg)
>>>> - isl6421->config |= ISL6421_LLC1;
>>>> + isl6421->reg1 |= ISL6421_LLC1;
>>>> else
>>>> - isl6421->config &= ~ISL6421_LLC1;
>>>> + isl6421->reg1 &= ~ISL6421_LLC1;
>>>>
>>>> - isl6421->config |= isl6421->override_or;
>>>> - isl6421->config &= isl6421->override_and;
>>>> + isl6421->reg1 |= isl6421->config->override_set;
>>>> + isl6421->reg1 &= ~isl6421->config->override_clear;
>>>>
>>>> return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>>>> }
>>>>
>>>> static void isl6421_release(struct dvb_frontend *fe)
>>>> {
>>>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>>>> +
>>>> /* power off */
>>>> isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
>>>> +
>>>> + if (isl6421->config->disable_overcurrent_protection)
>>>> + fe->ops.diseqc_send_master_cmd =
>>>> + isl6421->diseqc_send_master_cmd_orig;
>>> You need to test if this function pointer were defined or not at the config
>>> struct.
>>>
>> Why? If original value was NULL, then there should be no problem
>> to reassign back to NULL.
>>
>>>> /* free */
>>>> kfree(fe->sec_priv);
>>>> fe->sec_priv = NULL;
>>>> }
>>>>
>>>> -struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct
>>>> i2c_adapter *i2c, u8 i2c_addr,
>>>> - u8 override_set, u8 override_clear)
>>>> +struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>>>> + struct i2c_adapter *i2c,
>>>> + const struct isl6421_config
>>>> *config)
>>>> {
>>>> struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421),
>>>> GFP_KERNEL);
>>>> +
>>>> if (!isl6421)
>>>> return NULL;
>>>>
>>>> - /* default configuration */
>>>> - isl6421->config = ISL6421_ISEL1;
>>>> + isl6421->config = config;
>>>> isl6421->i2c = i2c;
>>>> - isl6421->i2c_addr = i2c_addr;
>>>> fe->sec_priv = isl6421;
>>>>
>>>> - /* bits which should be forced to '1' */
>>>> - isl6421->override_or = override_set;
>>>> -
>>>> - /* bits which should be forced to '0' */
>>>> - isl6421->override_and = ~override_clear;
>>>> + /* default configuration */
>>>> + isl6421->reg1 = ISL6421_ISEL1;
>>>>
>>>> /* detect if it is present or not */
>>>> if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
>>>> @@ -131,11 +188,38 @@ struct dvb_frontend *isl6421_attach(stru
>>>> /* override frontend ops */
>>>> fe->ops.set_voltage = isl6421_set_voltage;
>>>> fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
>>>> + if (config->tone_control)
>>>> + fe->ops.set_tone = isl6421_set_tone;
>>>> +
>>>> + printk(KERN_INFO "ISL6421 attached on addr=%x\n", config->i2c_addr);
>>>> +
>>>> + if (config->disable_overcurrent_protection) {
>>>> + if ((config->override_set & ISL6421_DCL) ||
>>>> + (config->override_clear & ISL6421_DCL)) {
>>>> + /* there is no sense to use overcurrent_enable
>>>> + * with DCL bit set in any override byte */
>>>> + if (config->override_set & ISL6421_DCL)
>>>> + printk(KERN_WARNING "ISL6421
>>>> overcurrent_enable"
>>>> + " with DCL bit in
>>>> override_set,"
>>>> + " overcurrent_enable
>>>> ignored\n");
>>>> + if (config->override_clear & ISL6421_DCL)
>>>> + printk(KERN_WARNING "ISL6421
>>>> overcurrent_enable"
>>>> + " with DCL bit in
>>>> override_clear,"
>>>> + " overcurrent_enable
>>>> ignored\n");
>>>> + } else {
>>>> + printk(KERN_WARNING "ISL6421 overcurrent_enable "
>>>> + " activated. WARNING: it can be "
>>>> + " dangerous for your hardware!");
>>>> + isl6421->diseqc_send_master_cmd_orig =
>>>> + fe->ops.diseqc_send_master_cmd;
>>>> + fe->ops.diseqc_send_master_cmd = isl6421_send_diseqc;
>>>> + }
>>>> + }
>>>>
>>>> return fe;
>>>> }
>>>> EXPORT_SYMBOL(isl6421_attach);
>>>>
>>>> MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
>>>> -MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
>>>> +MODULE_AUTHOR("Andrew de Quincey,Oliver Endriss,Ales Jurik,Jan Petrous");
>>>> MODULE_LICENSE("GPL");
>>>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/frontends/isl6421.h
>>>> --- a/linux/drivers/media/dvb/frontends/isl6421.h Mon Dec 14 17:43:13
>>>> 2009 -0200
>>>> +++ b/linux/drivers/media/dvb/frontends/isl6421.h Tue Dec 15 16:36:14
>>>> 2009 +0100
>>>> @@ -39,14 +39,40 @@
>>>> #define ISL6421_ISEL1 0x20
>>>> #define ISL6421_DCL 0x40
>>>>
>>>> +struct isl6421_config {
>>>> + /* I2C address */
>>>> + u8 i2c_addr;
>>>> +
>>>> + /* Enable DISEqC tone control mode */
>>>> + bool tone_control;
>>>> +
>>>> + /*
>>>> + * Disable isl6421 overcurrent protection.
>>>> + *
>>>> + * WARNING: Don't disable the protection unless you are 100% sure
>>>> about
>>>> + * what you're doing, otherwise you may damage your board.
>>>> + * Only a few designs require to disable the protection,
>>>> since
>>>> + * the hardware designer opted to use a hardware protection
>>>> instead
>>>> + */
>>>> + bool disable_overcurrent_protection;
>>>> +
>>>> + /* bits which should be forced to '1' */
>>>> + u8 override_set;
>>>> +
>>>> + /* bits which should be forced to '0' */
>>>> + u8 override_clear;
>>>> +};
>>>> +
>>>> +
>>>> #if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) &&
>>>> defined(MODULE))
>>>> /* override_set and override_clear control which system register bits
>>>> (above) to always set & clear */
>>>> -extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>>>> struct i2c_adapter *i2c, u8 i2c_addr,
>>>> - u8 override_set, u8 override_clear);
>>>> +extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>>>> + struct i2c_adapter *i2c,
>>>> + const struct isl6421_config
>>>> *config);
>>>> #else
>>>> -static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend
>>>> *fe, struct i2c_adapter *i2c, u8 i2c_addr,
>>>> - u8 override_set, u8
>>>> override_clear)
>>>> -{
>>>> +static struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>>>> + struct i2c_adapter *i2c,
>>>> + const struct isl6421_config
>>>> *config);
>>>> printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
>>>> return NULL;
>>>> }
>>>> diff -r 79fc32bba0a0 linux/drivers/media/video/cx88/cx88-dvb.c
>>>> --- a/linux/drivers/media/video/cx88/cx88-dvb.c Mon Dec 14 17:43:13
>>>> 2009 -0200
>>>> +++ b/linux/drivers/media/video/cx88/cx88-dvb.c Tue Dec 15 16:36:14
>>>> 2009 +0100
>>>> @@ -456,6 +456,12 @@ static struct cx24123_config hauppauge_n
>>>> .set_ts_params = cx24123_set_ts_param,
>>>> };
>>>>
>>>> +static struct isl6421_config hauppauge_novas_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = ISL6421_DCL,
>>>> + .override_clear = 0x00,
>>> Don't initialize a value with zero.
>>>
>> Done.
>>
>>>> +};
>>>> +
>>>> static struct cx24123_config kworld_dvbs_100_config = {
>>>> .demod_address = 0x15,
>>>> .set_ts_params = cx24123_set_ts_param,
>>>> @@ -614,6 +620,12 @@ static struct cx24116_config hauppauge_h
>>>> .reset_device = cx24116_reset_device,
>>>> };
>>>>
>>>> +static struct isl6421_config hauppauge_hvr4000_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = ISL6421_DCL,
>>>> + .override_clear = 0x00,
>>> Don't initialize a value with zero.
>>>
>> Done.
>>
>>>> +};
>>>> +
>>>> static struct cx24116_config tevii_s460_config = {
>>>> .demod_address = 0x55,
>>>> .set_ts_params = cx24116_set_ts_param,
>>>> @@ -757,7 +769,7 @@ static int dvb_register(struct cx8802_de
>>>> if (!dvb_attach(isl6421_attach,
>>>> fe0->dvb.frontend,
>>>> &dev->core->i2c_adap,
>>>> - 0x08, ISL6421_DCL, 0x00))
>>>> + &hauppauge_novas_isl6421_config))
>>>> goto frontend_detach;
>>>> }
>>>> /* MFE frontend 2 */
>>>> @@ -995,7 +1007,8 @@ static int dvb_register(struct cx8802_de
>>>> &core->i2c_adap);
>>>> if (fe0->dvb.frontend) {
>>>> if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
>>>> - &core->i2c_adap, 0x08, ISL6421_DCL,
>>>> 0x00))
>>>> + &core->i2c_adap,
>>>> + &hauppauge_novas_isl6421_config))
>>>> goto frontend_detach;
>>>> }
>>>> break;
>>>> @@ -1100,7 +1113,7 @@ static int dvb_register(struct cx8802_de
>>>> if (!dvb_attach(isl6421_attach,
>>>> fe0->dvb.frontend,
>>>> &dev->core->i2c_adap,
>>>> - 0x08, ISL6421_DCL, 0x00))
>>>> + &hauppauge_hvr4000_isl6421_config))
>>>> goto frontend_detach;
>>>> }
>>>> /* MFE frontend 2 */
>>>> @@ -1128,7 +1141,7 @@ static int dvb_register(struct cx8802_de
>>>> if (!dvb_attach(isl6421_attach,
>>>> fe0->dvb.frontend,
>>>> &dev->core->i2c_adap,
>>>> - 0x08, ISL6421_DCL, 0x00))
>>>> + &hauppauge_hvr4000_isl6421_config))
>>>> goto frontend_detach;
>>>> }
>>>> break;
>>>> diff -r 79fc32bba0a0 linux/drivers/media/video/saa7134/saa7134-dvb.c
>>>> --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Mon Dec 14 17:43:13
>>>> 2009 -0200
>>>> +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Tue Dec 15 16:36:14
>>>> 2009 +0100
>>>> @@ -716,6 +716,12 @@ static struct tda1004x_config lifeview_t
>>>> .request_firmware = philips_tda1004x_request_firmware
>>>> };
>>>>
>>>> +static struct isl6421_config lifeview_trio_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = 0x00,
>>>> + .override_clear = 0x00,
>>> Don't initialize a value with zero.
>>>
>> Done.
>>
>>>> +};
>>>> +
>>>> static struct tda1004x_config tevion_dvbt220rf_config = {
>>>> .demod_address = 0x08,
>>>> .invert = 1,
>>>> @@ -895,6 +901,12 @@ static struct tda10086_config flydvbs =
>>>> .invert = 0,
>>>> .diseqc_tone = 0,
>>>> .xtal_freq = TDA10086_XTAL_16M,
>>>> +};
>>>> +
>>>> +static struct isl6421_config flydvbs_isl6421_config = {
>>>> + .i2c_address = 0x08,
>>>> + .override_set = 0x00,
>>>> + .override_clear = 0x00,
>>> Don't initialize a value with zero.
>>>
>> Done.
>>
>>>> };
>>>>
>>>> static struct tda10086_config sd1878_4m = {
>>>> @@ -1248,7 +1260,7 @@ static int dvb_init(struct saa7134_dev *
>>>> goto dettach_frontend;
>>>> }
>>>> if (dvb_attach(isl6421_attach,
>>>> fe0->dvb.frontend, &dev->i2c_adap,
>>>> -
>>>> 0x08, 0, 0) == NULL) {
>>>> +
>>>> &lifeview_trio_isl6421_config) == NULL) {
>>>> wprintk("%s: Lifeview Trio, No
>>>> ISL6421 found!\n", __func__);
>>>> goto dettach_frontend;
>>>> }
>>>> @@ -1349,7 +1361,8 @@ static int dvb_init(struct saa7134_dev *
>>>> goto dettach_frontend;
>>>> }
>>>> if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
>>>> - &dev->i2c_adap, 0x08, 0, 0) == NULL) {
>>>> + &dev->i2c_adap,
>>>> + &flydvbs_isl6421_config) == NULL) {
>>>> wprintk("%s: No ISL6421 found!\n", __func__);
>>>> goto dettach_frontend;
>>>> }
>>>
>>>
>> I hope mailer not squash patch somehow
>>
>> Regards
>>
>> /Honza
>>
>> ---
>>
>> isl6421.c - added tone control and temporary diseqc overcurrent
>>
>> Signed-off-by: Jan Petrous <jpetr...@gmail.com>
>> Signed-off-by: Ales Jurik <aju...@quick.cz>
>>
>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
>> --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Mon Dec 14
>> 17:43:13 2009 -0200
>> +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Wed Dec 16
>> 01:08:05 2009 +0100
>> @@ -302,6 +302,12 @@ static struct itd1000_config skystar2_re
>> .i2c_address = 0x61,
>> };
>>
>> +static struct isl6421_config skystar2_rev2_7_isl6421_config = {
>> + .i2c_address = 0x08,
>> + .override_set = 0x01,
>> + .override_clear = 0x01,
>> +};
>> +
>> static int skystar2_rev27_attach(struct flexcop_device *fc,
>> struct i2c_adapter *i2c)
>> {
>> @@ -325,7 +331,7 @@ static int skystar2_rev27_attach(struct
>> /* enable no_base_addr - no repeated start when reading */
>> fc->fc_i2c_adap[2].no_base_addr = 1;
>> if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
>> - 0x08, 1, 1)) {
>> + &skystar2_rev2_7_isl6421_config)) {
>> err("ISL6421 could NOT be attached");
>> goto fail_isl;
>> }
>> @@ -368,6 +374,10 @@ static const struct cx24113_config skyst
>> .xtal_khz = 10111,
>> };
>>
>> +static struct isl6421_config skystar2_rev2_8_isl6421_config = {
>> + .i2c_address = 0x08,
>> +};
>> +
>> static int skystar2_rev28_attach(struct flexcop_device *fc,
>> struct i2c_adapter *i2c)
>> {
>> @@ -391,7 +401,7 @@ static int skystar2_rev28_attach(struct
>>
>> fc->fc_i2c_adap[2].no_base_addr = 1;
>> if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
>> - 0x08, 0, 0)) {
>> + &skystar2_rev2_8_isl6421_config)) {
>> err("ISL6421 could NOT be attached");
>> fc->fc_i2c_adap[2].no_base_addr = 0;
>> return 0;
>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/frontends/isl6421.c
>> --- a/linux/drivers/media/dvb/frontends/isl6421.c Mon Dec 14 17:43:13
>> 2009 -0200
>> +++ b/linux/drivers/media/dvb/frontends/isl6421.c Wed Dec 16 01:08:05
>> 2009 +0100
>> @@ -3,6 +3,9 @@
>> *
>> * Copyright (C) 2006 Andrew de Quincey
>> * Copyright (C) 2006 Oliver Endriss
>> + * Copyright (C) 2009 Ales Jurik and Jan Petrous (added optional 22k tone
>> + * support and temporary diseqc overcurrent enable until
>> + * next command - set voltage or tone)
>> *
>> * This program is free software; you can redistribute it and/or
>> * modify it under the terms of the GNU General Public License
>> @@ -36,37 +39,91 @@
>> #include "isl6421.h"
>>
>> struct isl6421 {
>> - u8 config;
>> - u8 override_or;
>> - u8 override_and;
>> - struct i2c_adapter *i2c;
>> - u8 i2c_addr;
>> + const struct isl6421_config *config;
>> + u8 sys_reg;
>> +
>> + struct i2c_adapter *i2c;
>> +
>> + int (*diseqc_send_master_cmd_orig)(struct dvb_frontend *fe,
>> + struct dvb_diseqc_master_cmd *cmd);
>> };
>>
>> static int isl6421_set_voltage(struct dvb_frontend *fe,
>> fe_sec_voltage_t voltage)
>> {
>> struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>> - struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
>> - .buf = &isl6421->config,
>> - .len = sizeof(isl6421->config) };
>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>> 0,
>> + .buf = &isl6421->sys_reg,
>> + .len = sizeof(isl6421->sys_reg) };
>>
>> - isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
>> + isl6421->sys_reg &= ~(ISL6421_VSEL1 | ISL6421_EN1);
>>
>> switch(voltage) {
>> case SEC_VOLTAGE_OFF:
>> break;
>> case SEC_VOLTAGE_13:
>> - isl6421->config |= ISL6421_EN1;
>> + isl6421->sys_reg |= ISL6421_EN1;
>> break;
>> case SEC_VOLTAGE_18:
>> - isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
>> + isl6421->sys_reg |= (ISL6421_EN1 | ISL6421_VSEL1);
>> break;
>> default:
>> return -EINVAL;
>> };
>>
>> - isl6421->config |= isl6421->override_or;
>> - isl6421->config &= isl6421->override_and;
>> + isl6421->sys_reg |= isl6421->config->override_set;
>> + isl6421->sys_reg &= ~isl6421->config->override_clear;
>> +
>> + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>> +}
>> +
>> +/* Hooked to fe->ops.diseqc_send_master_cmd() only
>> + when disable_overcurrent_protection=1 */
>> +static int isl6421_send_diseqc(struct dvb_frontend *fe,
>> + struct dvb_diseqc_master_cmd *cmd)
>> +{
>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>> 0,
>> + .buf = &isl6421->sys_reg,
>> + .len = sizeof(isl6421->sys_reg) };
>> +
>> + isl6421->sys_reg |= ISL6421_DCL;
>> +
>> + isl6421->sys_reg |= isl6421->config->override_set;
>> + isl6421->sys_reg &= ~isl6421->config->override_clear;
>> +
>> + if (i2c_transfer(isl6421->i2c, &msg, 1) != 1)
>> + return -EIO;
>> +
>> + isl6421->sys_reg &= ~ISL6421_DCL;
>> +
>> + return isl6421->diseqc_send_master_cmd_orig ?
>> + isl6421->diseqc_send_master_cmd_orig(fe, cmd) : -EIO;
>> +}
>> +
>> +static int isl6421_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t
>> tone)
>> +{
>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>> 0,
>> + .buf = &isl6421->sys_reg,
>> + .len = sizeof(isl6421->sys_reg) };
>> +
>> + isl6421->sys_reg &= ~(ISL6421_ENT1);
>> +
>> + printk(KERN_INFO "%s: %s\n", __func__, ((tone == SEC_TONE_OFF) ?
>> + "Off" : "On"));
>> +
>> + switch (tone) {
>> + case SEC_TONE_ON:
>> + isl6421->sys_reg |= ISL6421_ENT1;
>> + break;
>> + case SEC_TONE_OFF:
>> + break;
>> + default:
>> + return -EINVAL;
>> + };
>> +
>> + isl6421->sys_reg |= isl6421->config->override_set;
>> + isl6421->sys_reg &= ~isl6421->config->override_clear;
>>
>> return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>> }
>> @@ -74,49 +131,52 @@ static int isl6421_enable_high_lnb_volta
>> static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long
>> arg)
>> {
>> struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>> - struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
>> - .buf = &isl6421->config,
>> - .len = sizeof(isl6421->config) };
>> + struct i2c_msg msg = { .addr = isl6421->config->i2c_addr, .flags =
>> 0,
>> + .buf = &isl6421->sys_reg,
>> + .len = sizeof(isl6421->sys_reg) };
>>
>> if (arg)
>> - isl6421->config |= ISL6421_LLC1;
>> + isl6421->sys_reg |= ISL6421_LLC1;
>> else
>> - isl6421->config &= ~ISL6421_LLC1;
>> + isl6421->sys_reg &= ~ISL6421_LLC1;
>>
>> - isl6421->config |= isl6421->override_or;
>> - isl6421->config &= isl6421->override_and;
>> + isl6421->sys_reg |= isl6421->config->override_set;
>> + isl6421->sys_reg &= ~isl6421->config->override_clear;
>>
>> return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
>> }
>>
>> static void isl6421_release(struct dvb_frontend *fe)
>> {
>> + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
>> +
>> /* power off */
>> isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
>> +
>> + if (isl6421->config->disable_overcurrent_protection)
>> + fe->ops.diseqc_send_master_cmd =
>> + isl6421->diseqc_send_master_cmd_orig;
>>
>> /* free */
>> kfree(fe->sec_priv);
>> fe->sec_priv = NULL;
>> }
>>
>> -struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct
>> i2c_adapter *i2c, u8 i2c_addr,
>> - u8 override_set, u8 override_clear)
>> +struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>> + struct i2c_adapter *i2c,
>> + const struct isl6421_config
>> *config)
>> {
>> struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL);
>> +
>> if (!isl6421)
>> return NULL;
>>
>> - /* default configuration */
>> - isl6421->config = ISL6421_ISEL1;
>> + isl6421->config = config;
>> isl6421->i2c = i2c;
>> - isl6421->i2c_addr = i2c_addr;
>> fe->sec_priv = isl6421;
>>
>> - /* bits which should be forced to '1' */
>> - isl6421->override_or = override_set;
>> -
>> - /* bits which should be forced to '0' */
>> - isl6421->override_and = ~override_clear;
>> + /* default configuration */
>> + isl6421->sys_reg = ISL6421_ISEL1;
>>
>> /* detect if it is present or not */
>> if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
>> @@ -131,11 +191,38 @@ struct dvb_frontend *isl6421_attach(stru
>> /* override frontend ops */
>> fe->ops.set_voltage = isl6421_set_voltage;
>> fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
>> + if (config->tone_control)
>> + fe->ops.set_tone = isl6421_set_tone;
>> +
>> + printk(KERN_INFO "ISL6421 attached on addr=%x\n", config->i2c_addr);
>> +
>> + if (config->disable_overcurrent_protection) {
>> + if ((config->override_set & ISL6421_DCL) ||
>> + (config->override_clear & ISL6421_DCL)) {
>> + /* there is no sense to use overcurrent_enable
>> + * with DCL bit set in any override byte */
>> + if (config->override_set & ISL6421_DCL)
>> + printk(KERN_WARNING "ISL6421
>> overcurrent_enable"
>> + " with DCL bit in
>> override_set,"
>> + " overcurrent_enable
>> ignored\n");
>> + if (config->override_clear & ISL6421_DCL)
>> + printk(KERN_WARNING "ISL6421
>> overcurrent_enable"
>> + " with DCL bit in
>> override_clear,"
>> + " overcurrent_enable
>> ignored\n");
>> + } else {
>> + printk(KERN_WARNING "ISL6421 overcurrent_enable "
>> + " activated. WARNING: it can be "
>> + " dangerous for your hardware!");
>> + isl6421->diseqc_send_master_cmd_orig =
>> + fe->ops.diseqc_send_master_cmd;
>> + fe->ops.diseqc_send_master_cmd = isl6421_send_diseqc;
>> + }
>> + }
>>
>> return fe;
>> }
>> EXPORT_SYMBOL(isl6421_attach);
>>
>> MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
>> -MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
>> +MODULE_AUTHOR("Andrew de Quincey,Oliver Endriss,Ales Jurik,Jan Petrous");
>> MODULE_LICENSE("GPL");
>> diff -r 79fc32bba0a0 linux/drivers/media/dvb/frontends/isl6421.h
>> --- a/linux/drivers/media/dvb/frontends/isl6421.h Mon Dec 14 17:43:13
>> 2009 -0200
>> +++ b/linux/drivers/media/dvb/frontends/isl6421.h Wed Dec 16 01:08:05
>> 2009 +0100
>> @@ -39,14 +39,40 @@
>> #define ISL6421_ISEL1 0x20
>> #define ISL6421_DCL 0x40
>>
>> +struct isl6421_config {
>> + /* I2C address */
>> + u8 i2c_addr;
>> +
>> + /* Enable DISEqC tone control mode */
>> + bool tone_control;
>> +
>> + /*
>> + * Disable isl6421 overcurrent protection.
>> + *
>> + * WARNING: Don't disable the protection unless you are 100% sure
>> about
>> + * what you're doing, otherwise you may damage your board.
>> + * Only a few designs require to disable the protection,
>> since
>> + * the hardware designer opted to use a hardware protection
>> instead
>> + */
>> + bool disable_overcurrent_protection;
>> +
>> + /* bits which should be forced to '1' */
>> + u8 override_set;
>> +
>> + /* bits which should be forced to '0' */
>> + u8 override_clear;
>> +};
>> +
>> +
>> #if defined(CONFIG_DVB_ISL6421) ||
>> (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE))
>> /* override_set and override_clear control which system register bits
>> (above) to always set & clear */
>> -extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>> struct i2c_adapter *i2c, u8 i2c_addr,
>> - u8 override_set, u8 override_clear);
>> +extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>> + struct i2c_adapter *i2c,
>> + const struct isl6421_config
>> *config);
>> #else
>> -static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend
>> *fe, struct i2c_adapter *i2c, u8 i2c_addr,
>> - u8 override_set, u8
>> override_clear)
>> -{
>> +static struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe,
>> + struct i2c_adapter *i2c,
>> + const struct isl6421_config
>> *config);
>> printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
>> return NULL;
>> }
>> diff -r 79fc32bba0a0 linux/drivers/media/video/cx88/cx88-dvb.c
>> --- a/linux/drivers/media/video/cx88/cx88-dvb.c Mon Dec 14 17:43:13 2009
>> -0200
>> +++ b/linux/drivers/media/video/cx88/cx88-dvb.c Wed Dec 16 01:08:05 2009
>> +0100
>> @@ -456,6 +456,11 @@ static struct cx24123_config hauppauge_n
>> .set_ts_params = cx24123_set_ts_param,
>> };
>>
>> +static struct isl6421_config hauppauge_novas_isl6421_config = {
>> + .i2c_address = 0x08,
>> + .override_set = ISL6421_DCL,
>> +};
>> +
>> static struct cx24123_config kworld_dvbs_100_config = {
>> .demod_address = 0x15,
>> .set_ts_params = cx24123_set_ts_param,
>> @@ -614,6 +619,11 @@ static struct cx24116_config hauppauge_h
>> .reset_device = cx24116_reset_device,
>> };
>>
>> +static struct isl6421_config hauppauge_hvr4000_isl6421_config = {
>> + .i2c_address = 0x08,
>> + .override_set = ISL6421_DCL,
>> +};
>> +
>> static struct cx24116_config tevii_s460_config = {
>> .demod_address = 0x55,
>> .set_ts_params = cx24116_set_ts_param,
>> @@ -757,7 +767,7 @@ static int dvb_register(struct cx8802_de
>> if (!dvb_attach(isl6421_attach,
>> fe0->dvb.frontend,
>> &dev->core->i2c_adap,
>> - 0x08, ISL6421_DCL, 0x00))
>> + &hauppauge_novas_isl6421_config))
>> goto frontend_detach;
>> }
>> /* MFE frontend 2 */
>> @@ -995,7 +1005,8 @@ static int dvb_register(struct cx8802_de
>> &core->i2c_adap);
>> if (fe0->dvb.frontend) {
>> if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
>> - &core->i2c_adap, 0x08, ISL6421_DCL,
>> 0x00))
>> + &core->i2c_adap,
>> + &hauppauge_novas_isl6421_config))
>> goto frontend_detach;
>> }
>> break;
>> @@ -1100,7 +1111,7 @@ static int dvb_register(struct cx8802_de
>> if (!dvb_attach(isl6421_attach,
>> fe0->dvb.frontend,
>> &dev->core->i2c_adap,
>> - 0x08, ISL6421_DCL, 0x00))
>> + &hauppauge_hvr4000_isl6421_config))
>> goto frontend_detach;
>> }
>> /* MFE frontend 2 */
>> @@ -1128,7 +1139,7 @@ static int dvb_register(struct cx8802_de
>> if (!dvb_attach(isl6421_attach,
>> fe0->dvb.frontend,
>> &dev->core->i2c_adap,
>> - 0x08, ISL6421_DCL, 0x00))
>> + &hauppauge_hvr4000_isl6421_config))
>> goto frontend_detach;
>> }
>> break;
>> diff -r 79fc32bba0a0 linux/drivers/media/video/saa7134/saa7134-dvb.c
>> --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Mon Dec 14
>> 17:43:13 2009 -0200
>> +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Wed Dec 16
>> 01:08:05 2009 +0100
>> @@ -716,6 +716,10 @@ static struct tda1004x_config lifeview_t
>> .request_firmware = philips_tda1004x_request_firmware
>> };
>>
>> +static struct isl6421_config lifeview_trio_isl6421_config = {
>> + .i2c_address = 0x08,
>> +};
>> +
>> static struct tda1004x_config tevion_dvbt220rf_config = {
>> .demod_address = 0x08,
>> .invert = 1,
>> @@ -895,6 +899,10 @@ static struct tda10086_config flydvbs =
>> .invert = 0,
>> .diseqc_tone = 0,
>> .xtal_freq = TDA10086_XTAL_16M,
>> +};
>> +
>> +static struct isl6421_config flydvbs_isl6421_config = {
>> + .i2c_address = 0x08,
>> };
>>
>> static struct tda10086_config sd1878_4m = {
>> @@ -1248,7 +1256,7 @@ static int dvb_init(struct saa7134_dev *
>> goto dettach_frontend;
>> }
>> if (dvb_attach(isl6421_attach,
>> fe0->dvb.frontend, &dev->i2c_adap,
>> -
>> 0x08, 0, 0) == NULL) {
>> +
>> &lifeview_trio_isl6421_config) == NULL) {
>> wprintk("%s: Lifeview Trio, No
>> ISL6421 found!\n", __func__);
>> goto dettach_frontend;
>> }
>> @@ -1349,7 +1357,8 @@ static int dvb_init(struct saa7134_dev *
>> goto dettach_frontend;
>> }
>> if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
>> - &dev->i2c_adap, 0x08, 0, 0) == NULL) {
>> + &dev->i2c_adap,
>> + &flydvbs_isl6421_config) == NULL) {
>> wprintk("%s: No ISL6421 found!\n", __func__);
>> goto dettach_frontend;
>> }
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
