Hi Jacopo, first thanks for your review and sorry for the delayed reply.
On 19-03-21 14:03, Jacopo Mondi wrote: > On Tue, Jan 29, 2019 at 05:07:52PM +0100, Marco Felsch wrote: > > This patch adds the of_graph support to describe the tvp connections. > > Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result > > of discussion [1],[2] the device-tree maps these ports 1:1. The svideo > > connector must be conneted to port@0/endpoint@1, look at the Documentation > > for more information. Since the TVP5150 is a converter the device-tree > > must contain at least 1-input and 1-output port. The mc-connectors and > > mc-links are only created if the device-tree contains the corresponding > > connector nodes. If more than one connector is available the > > media_entity_operations.link_setup() callback ensures that only one > > connector is active. > > > > [1] https://www.spinics.net/lists/linux-media/msg138545.html > > [2] https://www.spinics.net/lists/linux-media/msg138546.html > > > > Signed-off-by: Marco Felsch <m.fel...@pengutronix.de> > > --- > > Changelog: > > > > v4: > > - rebase on top of media_tree/master, fix merge conflict due to commit > > 60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints > > to zero") > > > > v3: > > - probe(): s/err/err_free_v4l2_ctrls > > - drop MC dependency for tvp5150_pads > > > > v2: > > - adapt commit message > > - unify ifdef switches > > - rename tvp5150_valid_input -> tvp5150_of_valid_input, to be more precise > > - mc: use 2-input and 1-output pad > > - mc: link svideo connector to both input pads > > - mc: enable/disable svideo links in one go > > - mc: change link_setup() behaviour, switch the input src don't require a > > explicite disable before. > > - mc: rename 'local' media_pad param to tvp5150_pad to avoid confusion > > - mc: enable link to the first available connector and set the > > corresponding tvp5150 input src per default during registered() > > - mc/of: factor out oftree connector allocation > > - of: drop svideo dt port > > - of: move svideo connector to port@0/endpoint@1 > > - of: require at least 1-in and 1-out endpoint > > > > drivers/media/i2c/tvp5150.c | 481 +++++++++++++++++++++++++++++++++--- > > 1 file changed, 442 insertions(+), 39 deletions(-) > > > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c > > index 89da921c8886..a89b83f69266 100644 > > --- a/drivers/media/i2c/tvp5150.c > > +++ b/drivers/media/i2c/tvp5150.c > > @@ -44,15 +44,38 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); > > #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg) > > > > enum tvp5150_pads { > > - TVP5150_PAD_IF_INPUT, > > + TVP5150_PAD_AIP1A = TVP5150_COMPOSITE0, > > + TVP5150_PAD_AIP1B, > > TVP5150_PAD_VID_OUT, > > TVP5150_NUM_PADS > > }; > > > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > +enum tvp5150_pads_state { > > + TVP5150_PAD_INACTIVE, > > + TVP5150_PAD_ACTIVE_COMPOSITE, > > + TVP5150_PAD_ACTIVE_SVIDEO, > > +}; > > + > > +struct tvp5150_connector { > > + struct media_entity ent; > > + struct media_pad pad; > > + unsigned int port_num; > > + bool is_svideo; > > +}; > > +#endif > > + > > struct tvp5150 { > > struct v4l2_subdev sd; > > -#ifdef CONFIG_MEDIA_CONTROLLER > > + /* additional additional endpoint for the svideo connector */ > > + struct device_node *endpoints[TVP5150_NUM_PADS + 1]; > > + unsigned int endpoints_num; > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > struct media_pad pads[TVP5150_NUM_PADS]; > > + int pads_state[TVP5150_NUM_PADS]; > > + struct tvp5150_connector *connectors; > > + int connectors_num; > > + bool modify_second_link; > > #endif > > struct v4l2_ctrl_handler hdl; > > struct v4l2_rect rect; > > @@ -1167,6 +1190,160 @@ static int tvp5150_enum_frame_size(struct > > v4l2_subdev *sd, > > return 0; > > } > > > > +/**************************************************************************** > > + * Media entity ops > > + > > ****************************************************************************/ > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > +static int tvp5150_active_pad_idx(struct tvp5150 *decoder) > > +{ > > + int *pad_state = &decoder->pads_state[0]; > > + int i, idx = -1; > > + > > + for (i = 0; i < TVP5150_NUM_PADS - 1; i++) { > > + if ((pad_state[i] == TVP5150_PAD_ACTIVE_COMPOSITE) || > > + (pad_state[i] == TVP5150_PAD_ACTIVE_SVIDEO)) { > > + idx = i; > > + break; > > + } > > + } > > + > > + return idx; > > +} > > + > > +static int tvp5150_active_svideo_links(struct tvp5150 *decoder) > > +{ > > + int *pad_state = &decoder->pads_state[0]; > > + int i, links = 0; > > + > > + for (i = 0; i < TVP5150_NUM_PADS - 1; i++) > > + if (pad_state[i] == TVP5150_PAD_ACTIVE_SVIDEO) > > + links++; > > + > > + return links; > > +} > > + > > +static int tvp5150_modify_link(struct tvp5150 *decoder, unsigned int > > pad_idx, > > + struct media_pad *pad, int flags) > > +{ > > + struct media_pad *src_pad; > > + struct media_link *link; > > + > > + if (pad) > > + src_pad = pad; > > + else > > + src_pad = media_entity_remote_pad(&decoder->pads[pad_idx]); > > + > > + if (!src_pad) > > + return -1; > > + > > + link = media_entity_find_link(src_pad, > > + &decoder->pads[pad_idx]); > > + > > + /* > > + * Don't use locked version, since we are running already within the > > + * media_entity_setup_link() context. > > + */ > > + return __media_entity_setup_link(link, flags); > > + > > +} > > + > > +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, > > + u32 config); > > + > > +static int tvp5150_link_setup(struct media_entity *entity, > > + const struct media_pad *tvp5150_pad, > > + const struct media_pad *remote, u32 flags) > > +{ > > + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); > > + struct tvp5150 *decoder = to_tvp5150(sd); > > + int *pad_state = &decoder->pads_state[0]; > > + int i, active_pad, ret = 0; > > + bool is_svideo = false; > > + > > + /* > > + * The tvp state is determined by the enabled sink pad link. > > + * Enabling or disabling the source pad link has no effect. > > + */ > > + if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE) > > + return 0; > > + > > + /* check if the svideo connector should be enabled */ > > + for (i = 0; i < decoder->connectors_num; i++) { > > + if (remote->entity == &decoder->connectors[i].ent) { > > + is_svideo = decoder->connectors[i].is_svideo; > > + break; > > + } > > + } > > + > > + /* check if there is already a enabled svideo link and determine pad */ > > + active_pad = tvp5150_active_pad_idx(decoder); > > could this return -1 ? Is this an error? Yes it could return -1. This indicates that no pads are active so it isn't a error. > > + > > + dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]", > > + remote->entity->name, remote->index, tvp5150_pad->entity->name, > > + tvp5150_pad->index, flags & MEDIA_LNK_FL_ENABLED); > > + > > + if (flags & MEDIA_LNK_FL_ENABLED) { > > + if (active_pad >= 0 && !decoder->modify_second_link) > > + tvp5150_modify_link(decoder, active_pad, NULL, 0); > > + > > + dev_dbg(sd->dev, "Setting %d active [%s]\n", tvp5150_pad->index, > > + is_svideo ? "svideo" : "composite"); > > + pad_state[tvp5150_pad->index] = > > + is_svideo ? TVP5150_PAD_ACTIVE_SVIDEO : > > + TVP5150_PAD_ACTIVE_COMPOSITE; > > + > > + if (is_svideo) { > > + if (tvp5150_active_svideo_links(decoder) < 2) { > > + unsigned int idx = tvp5150_pad->index ^ 1; > > + > > + decoder->modify_second_link = true; > > + tvp5150_modify_link(decoder, idx, > > + (struct media_pad *)remote, > > + MEDIA_LNK_FL_ENABLED); > > + } else { > > + decoder->modify_second_link = false; > > + tvp5150_s_routing(sd, TVP5150_SVIDEO, > > + TVP5150_NORMAL, 0); > > + } > > + } else { > > + tvp5150_s_routing(sd, tvp5150_pad->index, > > + TVP5150_NORMAL, 0); > > + } > > I admit I didn't get how you use modify_second_link and s_routing(), > so I'll just assume it's correct :) Sorry for that.. I should add a comment here since it isn't intuitive. My goal was to enable/disable both connector links in one shot in case of s-video. I solved that using a recursion calling tvp5150_link_setup() a second time. Maybe I have to reconsidering about that implementation since it is a bit counter intuitve or at least adding a comment above. > > + } else { > > + /* > > + * Svideo streams on two pads and user can request to AIP1A or > > + * AIP1B pad. In either case both pads gets disabled in in go. > > + * So check only if user wants to disable a not enabled > > + * composite pad. > > + */ > > + if (!is_svideo && tvp5150_pad->index != active_pad) > > + goto out; > > + > > + dev_dbg(sd->dev, "going inactive\n"); > > + pad_state[tvp5150_pad->index] = TVP5150_PAD_INACTIVE; > > + > > + /* in case of svideo we need to disable the second pad too */ > > + if (tvp5150_active_svideo_links(decoder) > 0) { > > No need for "> 0" Yes, I will change that. > > + unsigned int idx = tvp5150_pad->index ^ 1; > > + > > + decoder->modify_second_link = true; > > + tvp5150_modify_link(decoder, idx, > > + (struct media_pad *)remote, 0); > > + } > > + > > + if (!decoder->modify_second_link) > > + tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : > > + active_pad, TVP5150_BLACK_SCREEN, 0); > > + decoder->modify_second_link = false; > > + } > > +out: > > + return ret; > > +} > > + > > +static const struct media_entity_operations tvp5150_sd_media_ops = { > > + .link_setup = tvp5150_link_setup, > > +}; > > +#endif > > > > /**************************************************************************** > > I2C Command > > > > ****************************************************************************/ > > @@ -1314,6 +1491,76 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, > > struct v4l2_tuner *vt) > > return 0; > > } > > > > +static int tvp5150_registered(struct v4l2_subdev *sd) > > +{ > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > + struct tvp5150 *decoder = to_tvp5150(sd); > > + unsigned int i; > > + int ret; > > + > > + /* > > + * Setup connector pads and links. Enable the link to the first > > + * available connector per default. > > + */ > > + for (i = 0; i < decoder->connectors_num; i++) { > > + struct media_entity *con = &decoder->connectors[i].ent; > > + struct media_pad *pad = &decoder->connectors[i].pad; > > + unsigned int port = decoder->connectors[i].port_num; > > + bool is_svideo = decoder->connectors[i].is_svideo; > > + int flags = i ? 0 : MEDIA_LNK_FL_ENABLED; > > + > > + pad->flags = MEDIA_PAD_FL_SOURCE; > > + ret = media_entity_pads_init(con, 1, pad); > > + if (ret < 0) > > + return ret; > > + > > + ret = media_device_register_entity(sd->v4l2_dev->mdev, con); > > + if (ret < 0) > > + return ret; > > + > > + ret = media_create_pad_link(con, 0, &sd->entity, port, flags); > > + if (ret < 0) { > > + media_device_unregister_entity(con); > > + return ret; > > + } > > + > > + if (is_svideo) { > > + /* svideo links to both aip1a and aip1b */ > > + ret = media_create_pad_link(con, 0, &sd->entity, > > + port + 1, flags); > > This would link to aip1b endpoint@0, right? It seems from your DT > bindings example that it is accepted to have aip1b with a composite > endpoint and an s_video endpoint@1 in aip1a, isn't it? Yes and yes. The documentation layout is the result of a longer port/endpoint discussion. In real the HW has only two input port (no dedicated s-video port). The s-video "port" is archived enabling both AIP1A and AIP1B port. > > > + if (ret < 0) { > > + media_device_unregister_entity(con); > > + return ret; > > + } > > + } > > + > > + /* enable default input */ > > + if (flags == MEDIA_LNK_FL_ENABLED) { > > + if (is_svideo) { > > + decoder->pads_state[TVP5150_PAD_AIP1A] = > > + decoder->pads_state[TVP5150_PAD_AIP1B] = > > + TVP5150_PAD_ACTIVE_SVIDEO; > > + decoder->input = TVP5150_SVIDEO; > > + } else { > > + if (port == 0) { > > + decoder->pads_state[TVP5150_PAD_AIP1A] = > > + TVP5150_PAD_ACTIVE_COMPOSITE; > > + decoder->input = TVP5150_COMPOSITE0; > > + } else { > > + decoder->pads_state[TVP5150_PAD_AIP1B] = > > + TVP5150_PAD_ACTIVE_COMPOSITE; > > + decoder->input = TVP5150_COMPOSITE1; > > + } > > + } > > + tvp5150_selmux(sd); > > + decoder->modify_second_link = false; > > + } > > + } > > +#endif > > + return 0; > > +} > > + > > + > > /* ----------------------------------------------------------------------- > > */ > > > > static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { > > @@ -1367,6 +1614,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = { > > .pad = &tvp5150_pad_ops, > > }; > > > > +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = { > > + .registered = tvp5150_registered, > > +}; > > + > > > > /**************************************************************************** > > I2C Client & Driver > > > > ****************************************************************************/ > > @@ -1515,38 +1766,197 @@ static int tvp5150_init(struct i2c_client *c) > > return 0; > > } > > > > -static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node > > *np) > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > +static int tvp5150_add_of_connectors(struct tvp5150 *decoder) > > { > > - struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; > > - struct device_node *ep; > > - unsigned int flags; > > - int ret = 0; > > + struct device *dev = decoder->sd.dev; > > + struct device_node *rp; > > + struct of_endpoint ep; > > + struct tvp5150_connector *connectors; > > + unsigned int connectors_num = decoder->connectors_num; > > + int i, ret; > > + > > + /* Allocate and initialize all available input connectors */ > > + connectors = devm_kcalloc(dev, connectors_num, sizeof(*connectors), > > + GFP_KERNEL); > > + if (!connectors) > > + return -ENOMEM; > > > > - ep = of_graph_get_next_endpoint(np, NULL); > > - if (!ep) > > - return -EINVAL; > > + for (i = 0; i < connectors_num; i++) { > > + rp = of_graph_get_remote_port_parent(decoder->endpoints[i]); > > + of_graph_parse_endpoint(decoder->endpoints[i], &ep); > > + connectors[i].port_num = ep.port; > > + connectors[i].is_svideo = !!of_device_is_compatible(rp, > > + "svideo-connector"); > > > > - ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); > > - if (ret) > > - goto err; > > + if (connectors[i].is_svideo) > > + connectors[i].ent.function = MEDIA_ENT_F_CONN_SVIDEO; > > + else > > + connectors[i].ent.function = MEDIA_ENT_F_CONN_COMPOSITE; > > + > > + connectors[i].ent.flags = MEDIA_ENT_FL_CONNECTOR; > > + ret = of_property_read_string(rp, "label", > > + &connectors[i].ent.name); > > + if (ret < 0) > > + return ret; > > + } > > + > > + decoder->connectors = connectors; > > + > > + return 0; > > +} > > +#endif > > + > > +static int tvp5150_mc_init(struct v4l2_subdev *sd) > > +{ > > +#if defined(CONFIG_MEDIA_CONTROLLER) > > + struct tvp5150 *decoder = to_tvp5150(sd); > > + unsigned int i; > > + int ret; > > + > > + sd->entity.ops = &tvp5150_sd_media_ops; > > + sd->entity.function = MEDIA_ENT_F_ATV_DECODER; > > > > - flags = bus_cfg.bus.parallel.flags; > > + /* Initialize all TVP5150 pads */ > > + for (i = 0; i < TVP5150_NUM_PADS; i++) { > > + if (i < TVP5150_NUM_PADS - 1) { > > + decoder->pads[i].flags = MEDIA_PAD_FL_SINK; > > + decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG; > > + } else { > > + decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE; > > + decoder->pads[i].sig_type = PAD_SIGNAL_DV; > > + } > > + } > > + ret = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, > > + decoder->pads); > > + if (ret < 0) > > + goto out; > > > > - if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && > > - !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && > > - flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && > > - flags & V4L2_MBUS_FIELD_EVEN_LOW)) { > > + if (IS_ENABLED(CONFIG_OF)) > > + ret = tvp5150_add_of_connectors(decoder); > > +#endif > > +out: > > + return ret; > > if CONFIG_MEDIA_CONTROLLER is not enabled, ret is not defined. > Also please consider making a stub in the #else branch where you just > return 0; You're absolutly right. I will change that, thanks. > > As a general note, try to build without media controller support, I > see a few errors. Okay, I'm trying that and fix those errors. > > +} > > + > > +static bool tvp5150_of_valid_input(struct device_node *endpoint, > > + unsigned int port, unsigned int id) > > +{ > > + struct device_node *rp = of_graph_get_remote_port_parent(endpoint); > > + const char *input; > > + int ret; > > + > > + /* perform some basic checks needed for later mc_init */ > > + switch (port) { > > + case TVP5150_PAD_AIP1A: > > + /* svideo must be connected to endpoint@1 */ > > + ret = id ? of_device_is_compatible(rp, "svideo-connector") : > > + of_device_is_compatible(rp, > > + "composite-video-connector"); > > + if (!ret) > > + return false; > > + break; > > + case TVP5150_PAD_AIP1B: > > + ret = of_device_is_compatible(rp, "composite-video-connector"); > > + if (!ret) > > + return false; > > + break; > > + } > > + > > + ret = of_property_read_string(rp, "label", &input); > > + if (ret < 0) > > + return false; > > What are you using 'input' for, to make sure the property is there as > you use it later? Be aware that "label" is not mandatory for > connectors, and you need it only when media controller is enabled. If > you fail here, it will fail also for non-media controller devices that > do not need it. I would drop the check. You're right. The label is used later on to set the connector entity name. There is a second patchset fyling around which introduces a generic parsing routine which fixing this too. I should merge those two sets into one for the next round. > > + > > + return true; > > +} > > + > > +static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node > > *np) > > +{ > > + struct device *dev = decoder->sd.dev; > > + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; > > please use V4L2_MBUS_UNKNOWN instead of 0 Okay. > > + struct device_node *ep_np; > > + unsigned int flags; > > + int ret, i = 0, in = 0; > > + bool found = false; > > + > > + /* at least 1 output and 1 input */ > > Nitpicking: some comments start with lowercase other with upper case. > Also, sometimes there's a full stop at the end of the statement, > sometimes not. Okay I will fix that too. > > + decoder->endpoints_num = of_graph_get_endpoint_count(np); > > + if (decoder->endpoints_num < 2 || decoder->endpoints_num > 4) { > > I would print an error, as bindings are wrong and this should appear > in boot logs. Okay. > > ret = -EINVAL; > > goto err; > > } > > > > - decoder->mbus_type = bus_cfg.bus_type; > > + for_each_endpoint_of_node(np, ep_np) { > > + struct of_endpoint ep; > > + > > + of_graph_parse_endpoint(ep_np, &ep); > > + if (decoder->endpoints[i]) { > > Can you trigger this error condition with wrong bindings? I don't > think so. This is a development error, and if your code is correct, > this won't happen. I would drop the check, if I'm not mistaken. Yes, it's a dev error of course I can drop it to make it cleaner. > > + /* this should never happen */ > > + dev_err(dev, "Invalid endpoint %pOF on port %d\n", > > + ep.local_node, ep.port); > > + ret = -EINVAL; > > + goto err; > > + } > > > > + switch (ep.port) { > > + /* fall through */ > > + case TVP5150_PAD_AIP1A: > > + case TVP5150_PAD_AIP1B: > > + if (!tvp5150_of_valid_input(ep_np, ep.port, ep.id)) { > > + dev_err(dev, > > + "Invalid endpoint %pOF on port %d\n", > > + ep.local_node, ep.port); > > + ret = -EINVAL; > > + goto err; > > + } > > + in++; > > + break; > > + case TVP5150_PAD_VID_OUT: > > + ret = > > v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), > > + &bus_cfg); > > > + goto err; > > + > > + flags = bus_cfg.bus.parallel.flags; > > + > > + if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && > > + !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && > > + flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && > > + flags & V4L2_MBUS_FIELD_EVEN_LOW)) { > > There's a bit of confusion in bindings related to this. > The properties are listed as required, then it says if none are > specified it is assumed embedded BT.656 sync, and indeed here you want > all of them to be present to accept the bus as parallel. Yes I was confused too during checking your feedback but then I covered it hopefully right. This piece of code will only fail if we are in V4L2_MBUS_PARALLEL mode (with discrete sync) because the sync signals are pinned to that levels by the hardware. If non of these three properties are specified the v4l2_fwnode_endpoint_parse() will set the bus_type to V4L2_MBUS_BT656. So I think the test it correct but maybe we need to adapt the bindings a bit. Regards, Marco > So you either make them optional, or use 'bus-type' > property and use the newly introduced bus hints to > v4l2_fwnode_endpoint_parse and try to parse > V4L2_MBUS_PARALLEL first, V4L2_MBUS_BT656 if parallel fails, and > return an error otherwise. > > I think making the properties optional is the easiest way, you're > touching bindings anyway in the next patch. > > Thanks > j > > > + ret = -EINVAL; > > + goto err; > > + } > > + > > + decoder->mbus_type = bus_cfg.bus_type; > > + break; > > + default: > > + dev_err(dev, "Invalid port %d for endpoint %pOF\n", > > + ep.port, ep.local_node); > > + ret = -EINVAL; > > + goto err; > > + } > > + > > + of_node_get(ep_np); > > + decoder->endpoints[i] = ep_np; > > + i++; > > + > > + found = true; > > + } > > + > > + decoder->connectors_num = in; > > + return found ? 0 : -ENODEV; > > err: > > - of_node_put(ep); > > return ret; > > } > > > > +static void tvp5150_dt_cleanup(struct tvp5150 *decoder) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < TVP5150_NUM_PADS; i++) > > + of_node_put(decoder->endpoints[i]); > > +} > > + > > static const char * const tvp5150_test_patterns[2] = { > > "Disabled", > > "Black screen" > > @@ -1585,7 +1995,7 @@ static int tvp5150_probe(struct i2c_client *c, > > res = tvp5150_parse_dt(core, np); > > if (res) { > > dev_err(sd->dev, "DT parsing error: %d\n", res); > > - return res; > > + goto err_cleanup_dt; > > } > > } else { > > /* Default to BT.656 embedded sync */ > > @@ -1593,25 +2003,16 @@ static int tvp5150_probe(struct i2c_client *c, > > } > > > > v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); > > + sd->internal_ops = &tvp5150_internal_ops; > > sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > > > -#if defined(CONFIG_MEDIA_CONTROLLER) > > - core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; > > - core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG; > > - core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; > > - core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV; > > - > > - sd->entity.function = MEDIA_ENT_F_ATV_DECODER; > > - > > - res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads); > > - if (res < 0) > > - return res; > > - > > -#endif > > + res = tvp5150_mc_init(sd); > > + if (res) > > + goto err_cleanup_dt; > > > > res = tvp5150_detect_version(core); > > if (res < 0) > > - return res; > > + goto err_cleanup_dt; > > > > core->norm = V4L2_STD_ALL; /* Default is autodetect */ > > core->detected_norm = V4L2_STD_UNKNOWN; > > @@ -1637,7 +2038,7 @@ static int tvp5150_probe(struct i2c_client *c, > > sd->ctrl_handler = &core->hdl; > > if (core->hdl.error) { > > res = core->hdl.error; > > - goto err; > > + goto err_free_v4l2_ctrls; > > } > > > > tvp5150_set_default(tvp5150_read_std(sd), &core->rect); > > @@ -1649,19 +2050,21 @@ static int tvp5150_probe(struct i2c_client *c, > > tvp5150_isr, IRQF_TRIGGER_HIGH | > > IRQF_ONESHOT, "tvp5150", core); > > if (res) > > - goto err; > > + goto err_free_v4l2_ctrls; > > } > > > > res = v4l2_async_register_subdev(sd); > > if (res < 0) > > - goto err; > > + goto err_free_v4l2_ctrls; > > > > if (debug > 1) > > tvp5150_log_status(sd); > > return 0; > > > > -err: > > +err_free_v4l2_ctrls: > > v4l2_ctrl_handler_free(&core->hdl); > > +err_cleanup_dt: > > + tvp5150_dt_cleanup(core); > > return res; > > } > > > > -- > > 2.20.1 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
