Em Mon, 6 May 2019 15:39:05 +0200 Jacopo Mondi <jac...@jmondi.org> escreveu:
> Hi Marco, > thanks > > Reviewed-by: Jacopo Mondi <jac...@jmondi.org> Looks ok to me too. > > On Mon, Apr 15, 2019 at 02:44:13PM +0200, Marco Felsch wrote: > > The debug output for tvp5150_selmux() isn't really intuitive. Register > > values are printed decimal formatted and the input/output driver states > > are printed as enum. Even more the "normal" output enum mapps to zero so > > a active output will printing output=0 and a inactive output=1. > > > > Change this by brinting the register values hex formatted and the states > > as more readable string. > > > > Signed-off-by: Marco Felsch <m.fel...@pengutronix.de> > > --- > > drivers/media/i2c/tvp5150.c | 9 ++++++--- > > 1 file changed, 6 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c > > index c0ee08546643..13ee6d781efb 100644 > > --- a/drivers/media/i2c/tvp5150.c > > +++ b/drivers/media/i2c/tvp5150.c > > @@ -302,9 +302,12 @@ static void tvp5150_selmux(struct v4l2_subdev *sd) > > break; > > } > > > > - dev_dbg_lvl(sd->dev, 1, debug, "Selecting video route: route input=%i, > > output=%i => tvp5150 input=%i, opmode=%i\n", > > - decoder->input, decoder->output, > > - input, opmode); > > + dev_dbg_lvl(sd->dev, 1, debug, > > + "Selecting video route: route input=%s, output=%s => > > tvp5150 input=0x%02x, opmode=0x%02x\n", > > + decoder->input == 0 ? "aip1a" : > > + decoder->input == 2 ? "aip1b" : "svideo", > > + decoder->output == 0 ? "normal" : "black-frame-gen", > > + input, opmode); > > > > regmap_write(decoder->regmap, TVP5150_OP_MODE_CTL, opmode); > > regmap_write(decoder->regmap, TVP5150_VD_IN_SRC_SEL_1, input); > > -- > > 2.20.1 > > Thanks, Mauro
