Hi, Louis:
Please translate your Chinese reply into English. I think not all member
in the mail list understand Chinese.
Regards,
CK
On Mon, 2019-06-10 at 12:11 +0800, Louis Kuo (郭德寧) wrote:
> Hi CK,
>
> 剛才有跟Stu討論過了, 基本上mt8183 sensor interface driver和MT2712 MIPI-CSI2
> driver是兩套不一樣的架構
>
> 1. mt8183 sensor interface driver處理raw sensor, mt2712 mipi-csi2 driver處理yuv
> sensor, register設定不相同.
> 2. mt8183 sensor interface driver是獨立的v4l2 sub device, 單純處理phy和mipi-csi2設定,
> 沒有buffer概念. 後接另外一個isp cam v4l2 driver用來處理及輸出raw image.
> 3. mt2712 mipi-csi2 driver則是合併了mipi-csi2和camsv成一個video device, 需要做query
> buf/request buf/qbuf/dqbuf輸出yuv buffer, 架構設計上不同,
> Binding document也無法共用.
>
> 結論:
> 目前這兩套driver無法共用, 請悉知.
>
>
> In MIPI-CSI2 dt-binding for Mediatek MT2712 SoC
> > +Example:
> > +mipicsi0: mipicsi@10217000 {
> > +compatible = "mediatek,mt2712-mipicsi";
> > +mediatek,mipicsi = <&mipicsi>;
> > +iommus = <&iommu0 M4U_PORT_CAM_DMA0>, <= mt8183 sensor interface
> > driver單獨做phy和mipi-csi2設定, 沒dma output port
> > + <&iommu0 M4U_PORT_CAM_DMA1>;
> > +mediatek,larb = <&larb2>;
> > +power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
> > +
> > +mediatek,seninf_mux_camsv = <&seninf1_mux_camsv0 <=mt8183 sensor
> > driver沒有綁camsv driver
> > + &seninf2_mux_camsv1
> > + &seninf3_mux_camsv2
> > + &seninf4_mux_camsv3>;
> > +reg = <0 0x10217000 0 0x60>,
> > + <0 0x15002100 0 0x4>,
> > + <0 0x15002300 0 0x100>;
> > +mediatek,mipicsiid = <0>;
> > +mediatek,mipicsi_max_vc = <4>; <=mt8183 sensor driver不支持vc settings
> > +mediatek,serdes_link_reg = <0x49>;
> > +};
>
> BRs
> Louis
>
> -----Original Message-----
> From: Louis Kuo (郭德寧)
> Sent: Monday, June 10, 2019 10:57 AM
> To: 'CK Hu' <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; Sean Cheng (鄭昇弘)
> <[email protected]>; Rynn Wu (吳育恩) <[email protected]>;
> srv_heupstream <[email protected]>; Holmes Chiou (邱挺)
> <[email protected]>; Jerry-ch Chen (陳敬憲)
> <[email protected]>; Jungo Lin (林明俊) <[email protected]>; Sj
> Huang (黃信璋) <[email protected]>; [email protected];
> [email protected]; [email protected]; Christie Yu (游雅惠)
> <[email protected]>; Frederic Chen (陳俊元) <[email protected]>;
> [email protected]; [email protected]; Stu Hsieh
> (謝博鈞) <[email protected]>
> Subject: RE: [RFC PATCH V3 3/4] dt-bindings: mt8183: Add sensor interface
> dt-bindings
>
> Loop more
>
> -----Original Message-----
> From: CK Hu [mailto:[email protected]]
> Sent: Monday, June 10, 2019 10:24 AM
> To: Louis Kuo (郭德寧) <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; Sean Cheng (鄭昇弘)
> <[email protected]>; Rynn Wu (吳育恩) <[email protected]>;
> srv_heupstream <[email protected]>; Holmes Chiou (邱挺)
> <[email protected]>; Jerry-ch Chen (陳敬憲)
> <[email protected]>; Jungo Lin (林明俊) <[email protected]>; Sj
> Huang (黃信璋) <[email protected]>; [email protected];
> [email protected]; [email protected]; Christie Yu (游雅惠)
> <[email protected]>; Frederic Chen (陳俊元) <[email protected]>;
> [email protected]; [email protected]
> Subject: Re: [RFC PATCH V3 3/4] dt-bindings: mt8183: Add sensor interface
> dt-bindings
>
> Hi, Louis:
>
> It looks like that "mediatek,mt8183-seninf" has many common part with
> "mediatek,mt2712-mipicsi" [1] and "mediatek,mt2712-mipicsi-common" [2].
>
> The evidence comes from each driver.
>
> The register definition of mipi_rx phy is
>
> "mediatek,mt2712-mipicsi"
>
> +#define MIPI_RX_ANA00_CSI0x00
> +#define MIPI_RX_ANA04_CSI0x04
> +#define MIPI_RX_ANA08_CSI0x08
> +#define MIPI_RX_ANA0C_CSI0x0c
> +#define MIPI_RX_ANA10_CSI0x10
> +#define MIPI_RX_ANA20_CSI0x20
> +#define MIPI_RX_ANA24_CSI0x24
>
> "mediatek,mt8183-seninf"
>
> +#define MIPI_RX_ANA00_CSI0A 0x0000
> +#define MIPI_RX_ANA04_CSI0A 0x0004
> +#define MIPI_RX_ANA08_CSI0A 0x0008
> +#define MIPI_RX_ANA0C_CSI0A 0x000C
> +#define MIPI_RX_ANA10_CSI0A 0x0010
> +#define MIPI_RX_ANA20_CSI0A 0x0020
> +#define MIPI_RX_ANA24_CSI0A 0x0024
>
> The register definition of sensor interface top is
>
> "mediatek,mt2712-mipicsi-common"
>
> +#define SENINF_TOP_CTRL0x00
> +#define SENINF_TOP_CMODEL_PAR0x04
> +#define SENINF_TOP_MUX0x08
> +
> +#define SENINF_MUX_CTRL0x00
>
> "mediatek,mt8183-seninf"
>
> +#define SENINF_TOP_CTRL 0x0000
> +#define SENINF_TOP_CMODEL_PAR 0x0004
> +#define SENINF_TOP_MUX_CTRL 0x0008
> +#define rsv_000C 0x000C
> +#define SENINF_TOP_CAM_MUX_CTRL 0x0010
>
> The register definition of csi is
>
> "mediatek,mt2712-mipicsi"
>
> +#define SENINF_NCSI2_CTL0xA0
> +#define SENINF_NCSI2_LNRD_TIMING0xA8
> +#define SENINF_NCSI2_INT_EN0xB0
> +#define SENINF_NCSI2_INT_STATUS0xB4
> +#define SENINF_NCSI2_DBG_SEL0xB8
> +#define SENINF_NCSI2_HSRX_DBG0xD8
> +#define SENINF_NCSI2_DI0xDC
> +#define SENINF_NCSI2_DI_CTRL0xE4
>
> "mediatek,mt8183-seninf"
>
> +#define SENINF1_CSI2_CTL 0x0A00
> +#define SENINF1_CSI2_LNRD_TIMING 0x0A08
> +#define SENINF1_CSI2_INT_EN 0x0A10
> +#define SENINF1_CSI2_INT_STATUS 0x0A14
> +#define SENINF1_CSI2_DGB_SEL 0x0A18
> +#define SENINF1_CSI2_HSRX_DBG 0x0A38
> +#define SENINF1_CSI2_DI 0x0A3C
> +#define SENINF1_CSI2_DI_CTRL 0x0A44
>
> Because they have many common part, the common part should be merged and keep
> the different part for each SoC. Here is an example for common part and
> different part.
>
> Mtk_hdmi_phy (Common part)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c?h=v5.2-rc4
> Mtk_hdmi_phy (MT2701 part)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c?h=v5.2-rc4
> Mtk_hdmi_phy (MT8173 part)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c?h=v5.2-rc4
>
> So the first step is to common the binding document. Maybe you should discuss
> with Stu to achieve this target.
>
> [1] https://patchwork.kernel.org/patch/10974567/
> [2] https://patchwork.kernel.org/patch/10974559/
>
> Regards,
> CK
>
> On Thu, 2019-06-06 at 18:00 +0800, Louis Kuo wrote:
> > This patch adds the DT binding documentation for the sensor interface
> > module in Mediatek SoCs.
> >
> > Signed-off-by: Louis Kuo <[email protected]>
> > ---
> > .../devicetree/bindings/media/mediatek-seninf.txt | 31
> > ++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/mediatek-seninf.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/mediatek-seninf.txt
> > b/Documentation/devicetree/bindings/media/mediatek-seninf.txt
> > new file mode 100644
> > index 0000000..979063a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/mediatek-seninf.txt
> > @@ -0,0 +1,31 @@
> > +* Mediatek seninf MIPI-CSI2 host driver
> > +
> > +Seninf MIPI-CSI2 host driver is a HW camera interface controller. It
> > +support a widely adopted, simple, high-speed protocol primarily
> > +intended for point-to-point image and video transmission between cameras
> > and host devices.
> > +
> > +Required properties:
> > + - compatible: "mediatek,mt8183-seninf"
> > + - reg: Must contain an entry for each entry in reg-names.
> > + - reg-names: Must include the following entries:
> > + "base_reg": seninf registers base
> > + "rx_reg": Rx analog registers base
> > + - interrupts: interrupt number to the cpu.
> > + - clocks : clock name from clock manager
> > + - clock-names: must be CLK_CAM_SENINF and CLK_TOP_MUX_SENINF.
> > + It is the clocks of seninf
> > +
> > +Example:
> > +seninf: seninf@1a040000 {
> > +compatible = "mediatek,mt8183-seninf";
> > +reg = <0 0x1a040000 0 0x8000>,
> > + <0 0x11C80000 0 0x6000>;
> > +reg-names = "base_reg", "rx_reg";
> > +interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
> > +power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> > +clocks =
> > +<&camsys CLK_CAM_SENINF>, <&topckgen CLK_TOP_MUX_SENINF>;
> > +clock-names =
> > +"CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF";
> > +}
> > +
>
>
> *********************MEDIATEK Confidential/Internal Use*********************
